Improved Method for the Seismic Design of Anchored Steel Sheet Pile Walls
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 147, Issue 2
Abstract
This paper describes a new pseudostatic approach for an efficient seismic design of anchored steel sheet pile (ASSP) walls supported by shallow passive anchorages. As for other retaining structures, energy dissipation during strong earthquakes leading to reduced inertia forces can be achieved by allowing the activation of ductile plastic mechanisms. To this end, a robust method is required to identify all the possible yielding mechanisms and to guarantee the desired strength hierarchy. It is shown that dissipative mechanisms for ASSP walls correspond either to the local attainment of the soil shear strength in the supporting soil and around the anchor, or in the activation of a log-spiral global failure surface. A new limit equilibrium method is proposed to compute the critical acceleration of the system, corresponding to the actual mobilization of its strength, and the maximum internal forces in the structural members. Theoretical findings are validated against both existing dynamic centrifuge data and the results of original pseudostatic and fully dynamic numerical analyses.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Part of this work was carried out while the first author was supported by a research grant from ArcelorMittal.
References
Anderson, D. G., G. R. Martin, I. Lam, and J. N. Wang. 2008. Seismic analysis and design of retaining walls, buried structures, slopes, and embankments. Washington, DC: Transportation Research Board.
Becci, B., and M. Carni. 2015. “Pseudo-static analysis of flexible retaining structures including seismic thrust dependency on wall deformation.” In Vol. 4 of Soil-Structure Interaction, Underground Structures and Retaining Walls: Proc., ISSMGE Technical Committee 207 Int. Conf. on Geotechnical Engineering, 265. Amsterdam, Netherlands: IOS Press.
Callisto, L. 2014. “Capacity design of embedded retaining structures.” Géotechnique 64 (3): 204–214. https://doi.org/10.1680/geot.13.P.091.
Callisto, L., and I. Del Brocco. 2015. “Intrinsic seismic protection of cantilevered and anchored retaining structures.” In Proc., SECED Conf. on Earthquake Risk and Engineering Towards a Resilient World. Cambridge, UK: Society for Earthquake and Civil Engineering Dynamics.
Caputo, G., R. Conti, G. M. B. Viggiani, and C. Prüm. 2019. “Theoretical framework for the seismic design of anchored steel sheet pile walls.” In Proc., 7th Int. Conf. on Earthquake Geotechnical Engineering. Roma: Associazione Geotecnica Italiana, Viale dell’Università.
Conte, E., A. Troncone, and M. Vena. 2017. “A method for the design of embedded cantilever retaining walls under static and seismic loading.” Géotechnique 67 (12): 1081–1089. https://doi.org/10.1680/jgeot.17.D.013.
Conti, R., and G. Caputo. 2019. “A numerical and theoretical study on the seismic behaviour of yielding cantilever walls.” Géotechnique 69 (5): 377–390. https://doi.org/10.1680/jgeot.17.P.033.
Conti, R., and G. M. Viggiani. 2013. “A new limit equilibrium method for the pseudostatic design of embedded cantilevered retaining walls.” Soil Dyn. Earthquake Eng. 50: 143–150. https://doi.org/10.1016/j.soildyn.2013.03.008.
Conti, R., G. M. B. Viggiani, and F. Burali d’Arezzo. 2014. “Some remarks on the seismic behaviour of embedded cantilevered retaining walls.” Géotechnique 64 (1): 40–50. https://doi.org/10.1680/geot.13.P.031.
Conti, R., G. M. B. Viggiani, and S. Cavallo. 2013. “A two-rigid block model for sliding gravity retaining walls.” Soil Dyn. Earthquake Eng. 55 (Dec): 33–43. https://doi.org/10.1016/j.soildyn.2013.08.007.
Ebeling, R. M., and E. E. Morrison Jr. 1993. The seismic design of waterfront retaining structures, 256. Washington, DC: USACE Waterways Experiment Station.
Fusco, A., G. M. B. Viggiani, G. Madabhushi, G. Caputo, R. Conti, and C. Prüm. 2019. “Physical modelling of anchored steel sheet pile walls under seismic actions.” In Proc., 7th Int. Conf. on Earthquake Geotechnical Engineering. Roma: Associazione Geotecnica Italiana, Viale dell’Università.
Gazetas, G., E. Garini, and A. Zafeirakos. 2016. “Seismic analysis of tall anchored sheet-pile walls.” Soil Dyn. Earthquake Eng. 91 (Dec): 209–221. https://doi.org/10.1016/j.soildyn.2016.09.031.
Gong, W., J. R. Martin, C. H. Juang, S. E. Dickenson, and N. J. McCullough. 2019. “A hybrid framework for developing empirical model for seismic deformations of anchored sheetpile bulkheads.” Soil Dyn. Earthquake Eng. 116: 192–204. https://doi.org/10.1016/j.soildyn.2018.09.032.
Itasca. 2005. FLAC fast Lagrangian analysis of continua, v. 5.0. User’s manual. Minneapolis: Itasca.
Kloukinas, P., A. Scotto di Santolo, A. Penna, M. Dietz, A. Evangelista, A. L. Simonelli, C. Taylor, and G. Mylonakis. 2015. “Investigation of seismic response of cantilever retaining walls: Limit analysis vs shaking table testing.” Soil Dyn. Earthquake Eng. 77 (Oct): 432–445. https://doi.org/10.1016/j.soildyn.2015.05.018.
Lai, S. 1998. “Rigid and flexible retaining walls during Kobe earthquake.” In Proc., 4th Int. Conf. on Case Histories in Geotechnical Engineering, 108–127. Rolla, MO: Missouri Univ. of Science and Technology.
Lancellotta, R. 2007. “Lower-bound approach for seismic passive earth resistance.” Géotechnique 57 (3): 319–321. https://doi.org/10.1680/geot.2007.57.3.319.
Littlejohn, G. S. 1972. “Anchored diaphragm walls in sand—Anchor design.” Ground Eng. 5 (1): 12–17.
Madabhushi, S. P. G., and X. Zeng. 2007. “Simulating seismic response of cantilever retaining walls.” J. Geotech. Geoenviron. Eng. 133 (5): 539–549. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:5(539).
Mononobe, N., and H. Matsuo. 1929. “On the determination of earth pressure during earthquakes.” In Vol. 9 of Proc., World Engineering Congress, 177–185. Tokyo: Engineering Society of Japan.
MOT (Ministry of Transport). 1991. Technical standards for port and harbour facilities in Japan. Tokyo: Ports and Harbours Bureau, Overseas Coastal Area Development Institute of Japan.
Neelakantan, G., M. Budhu, and R. Richards Jr. 1990. “Mechanics and performance of a tied-back wall under seismic loads.” Earthquake Eng. Struct. Dyn. 19 (3): 315–331. https://doi.org/10.1002/eqe.4290190303.
Neelakantan, G., M. Budhu, and R. Richards. 1992. “Balanced seismic design of anchored retaining walls.” J. Geotech. Eng. 118 (6): 873–888. https://doi.org/10.1061/(ASCE)0733-9410(1992)118:6(873).
Newmark, N. M. 1965. “Effects of earthquakes on dams and embankments.” Géotechnique 15 (2): 139–160. https://doi.org/10.1680/geot.1965.15.2.139.
Okabe, S. 1924. “General theory on earth pressure and seismic stability of retaining wall and dam.” J. Jpn. Soc. Civ. Eng. 10 (6): 1277–1323.
PIANC (Permanent International Association of Navigation Congresses). 2001. Seismic design guidelines for port structures, 474. Rotterdam, Netherlands: International Navigation Association.
Rankine, W. J. M. 1857. “On the stability of loose earth.” Philos. Trans. R. Soc. London 147: 9–27. https://doi.org/10.1098/rstl.1857.0003.
Richards, R., and D. Elms. 1979. “Seismic behavior of gravity retaining walls.” J. Geotech. Eng. Div. 105 (4): 449–464.
Vucetic, M., and R. Dobry. 1991. “Effect of soil plasticity on cyclic response.” J. Geotech. Geoenv. Eng. 117 (1): 89–107. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:1(89).
Zeng, X., and R. S. Steedman. 1993. “On the behaviour of quay walls in earthquakes.” Géotechnique 43 (3): 417–431. https://doi.org/10.1680/geot.1993.43.3.417.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Dec 23, 2019
Accepted: Aug 13, 2020
Published online: Nov 17, 2020
Published in print: Feb 1, 2021
Discussion open until: Apr 17, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.