Statistical Assessment of Factor of Safety for Pile-Reinforced Slopes
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 146, Issue 9
Abstract
Statistical design of experiments was combined with coupled and uncoupled pile-reinforced slope stability analyses to draw conclusions about the factor of safety (FS) sensitivity to pile-related properties (pile location, spacing, embedment depth, and diameter), and to analyze differences between analytical techniques and space dimensionality. This evaluation performed two- and three-dimensional, limit equilibrium (LE), and finite-element (FE) analyses in a fully randomized block design, a definitive screening design, and a central composite design fashion. Pile location, embedment depth, and spacing had significant effects on FS. The optimum pile location is not fixed, and varies not only with changes in soil strength but also with variations in geometry properties because of the presence of interactions among the factors. The comparative analysis found no statistically significant difference between the studied methods. However, the confidence intervals indicated FS differences as high as 0.27, a variation of crucial importance for practical decision-making when FS is around the stability/failure threshold of 1. Recommendations for analysis and design of pile-reinforced slopes were given.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Additional data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
The authors thank the editors and the reviewers for their constructive comments and valuable suggestions to improve the quality of this article. In addition, the authors thank the Department of Civil, Construction and Environmental Engineering at Iowa State University for supporting this project.
References
API RP2A-WSD. 2000. Recommended practice for planning, designing and constructing fixed offshore platforms–working stress design, 21st ed., December 2000. Houston: American Petroleum Institute.
Bezerra, M. A., R. E. Santelli, E. P. Oliveira, L. S. Villar, and L. A. Escaleira. 2008. “Response surface methodology (RSM) as a tool for optimization in analytical chemistry.” Talanta 76 (5): 965–977. https://doi.org/10.1016/j.talanta.2008.05.019.
Byrne, P. M., D. L. Anderson, and W. Janzen. 1984. “Response of piles and casings to horizontal free-field soil displacements.” Can. Geotech. J. 21 (4): 720–725. https://doi.org/10.1139/t84-079.
Cai, F., and K. Ugai. 2000. “Numerical analysis of the stability of a slope reinforced with piles.” Soils Found. 40 (1): 73–84. https://doi.org/10.3208/sandf.40.73.
Carter, J. P., C. S. Desai, D. M. Potts, H. F. Schweiger, and S. W. Sloan. 2000. “Computing and computer modelling in geotechnical engineering.” In Proc., GeoEng 2000, Int. Conf. on Geotechnical and Geological Engineering, 1157–1252. Lancaster, PA: Technomic.
Chen, L. T., and H. G. Poulos. 1997. “Piles subjected to lateral soil movements.” J. Geotech. Geoenviron. Eng. 123 (9): 802–811. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:9(802).
Cheng, Y. M., T. Lansivaara, and W. B. Wei. 2007. “Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods.” Comput. Geotech. 34 (3): 137–150. https://doi.org/10.1016/j.compgeo.2006.10.011.
Christian, J. T. 1998. “What has the finite element method done for (or to) geotechnical engineering.” Civ. Eng. Pract. Boston 14 (2): 73–74.
Chugh, A. K. 2003. “On the boundary conditions in slope stability analysis.” Int. J. Numer. Anal. Methods Geomech. 27 (11): 905–926. https://doi.org/10.1002/nag.305.
Dawson, E. M., W. H. Roth, and A. Drescher. 1999. “Slope stability analysis by strength reduction.” Géotechnique 49 (6): 835–840. https://doi.org/10.1680/geot.1999.49.6.835.
De Beer, E. E., and M. Wallays. 1970. “Stabilization of a slope in schist by means of bored piles reinforced with steel beams.” In Proc., 2nd Int. Congress Rock Mech. 3: 361–369.
Duncan, J. M. 1999. “Applying the finite element to practical use in geotechnical engineering.” Civ. Eng. Pract. Boston 14 (2): 75–80.
Duncan, M. 1996. “State of the art: Limit equilibrium and finite-element analysis of slopes.” J. Geotech. Eng. 122 (7): 577–596. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:7(577).
Durakovic, B. 2017. “Design of experiments application, concepts, examples: State of the art.” Period. Eng. Nat. Sci. 5 (3): 421–439. https://doi.org/10.21533/pen.v5i3.145.
Fu, W., and Y. Liao. 2010. “Non-linear shear strength reduction technique in slope stability calculation.” Comput. Geotech. 37 (3): 288–298. https://doi.org/10.1016/j.compgeo.2009.11.002.
Gao, Y., M. Ye, and F. Zhang. 2015. “Three-dimensional analysis of slopes reinforced with piles.” J. Central South Univ. 22 (6): 2322–2327. https://doi.org/10.1007/s11771-015-2757-6.
Griffiths, D. V., and P. A. Lane. 1999. “Slope stability analysis by finite elements.” Géotechnique 49 (3): 387–403. https://doi.org/10.1680/geot.1999.49.3.387.
Hassiotis, S., J. Chameau, and M. Gunaratne. 1997. “Design method for stabilization of slopes with piles.” J. Geotech. Geoenviron. Eng. 123 (4): 314–323. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:4(314).
Hetenyi, M. 1946. Beams on elastic foundation: Theory with applications in the fields of civil and mechanical engineering. Ann Arbor, MI: Univ. of Michigan.
Ito, T., and T. Matsui. 1975. “Methods to estimate lateral force acting on stabilizing piles.” Soils Found. 15 (4): 43–59.
Jeong, S., B. Kim, J. Won, and J. Lee. 2003. “Uncoupled analysis of stabilizing piles in weathered slopes.” Comput. Geotech. 30 (8): 671–682. https://doi.org/10.1016/j.compgeo.2003.07.002.
Jones, B., and C. J. Nachtsheim. 2011. “A class of three-level designs for definitive screening in the presence of second-order effects.” J. Qual. Technol. 43 (1): 1–15. https://doi.org/10.1080/00224065.2011.11917841.
Kostić, S., N. Vasović, and D. Sunarić. 2016. “Slope stability analysis based on experimental design.” Int. J. Geomech. 16 (5): 04016009. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000551.
Lee, C. Y., T. S. Hull, and H. G. Poulos. 1995. “Simplified pile-slope stability analysis.” Comput. Geotech. 17 (1): 1–16. https://doi.org/10.1016/0266-352X(95)91300-S.
Lye, L. M. 2002. “Design of experiments in civil engineering: Are we still in the 1920s?” In Proc., 30th Annual Conf. of the Canadian Society for Civil Engineering. Montreal: Canadian Society for Civil Engineering.
Lye, L. M. 2003. “Some applications of design of experiment methodology in civil engineering.” In Proc., 32nd Annual Conf. of the Canadian Society for Civil Engineering. Moncton, NB: Canadian Society for Civil Engineering.
Matlock, H. 1970. “Correlations for design of laterally loaded piles in soft clay.” In Proc., Offshore Technology in Civil Engineering’s Hall of Fame Papers from the Early Years, 77–94. Austin, TX: Univ. of Texas at Austin.
Memon, Y. 2018. A comparison between limit equilibrium and finite element methods for slope stability analysis. Rolla, MO: Missouri Univ. of Science & Technology.
Montgomery, D. C., and G. C. Runger. 2007. Applied statistics and probability for engineers (With CD). Hoboken, NJ: Wiley.
Nian, T. K., G. Q. Chen, M. T. Luan, Q. Yang, and D. F. Zheng. 2008. “Limit analysis of the stability of slopes reinforced with piles against landslide in nonhomogeneous and anisotropic soils.” Can. Geotech. J. 45 (8): 1092–1103.
Niedz, R. P., and T. J. Evens. 2016. “Design of experiments (DOE)—History, concepts, and relevance to in vitro culture.” Vitro Cellular Develop. Biol. Plant 52 (6): 547–562. https://doi.org/10.1007/s11627-016-9786-1.
Poulos, H. G. 1973. “Analysis of piles in soil undergoing lateral movement.” J. Soil Mech. Found. Div. 99 (May): 391–406.
Poulos, H. G. 1995. “Design of reinforcing piles to increase slope stability.” Can. Geotech. J. 32 (5): 808–818. https://doi.org/10.1139/t95-078.
Pradel, D., J. Garner, and A. Lei Kwok. 2010. “Design of drilled shafts to enhance slope stability.” In Proc., Earth Retention Conf. 3, 920–927. Reston, VA: ASCE.
Reese, L. C., W. R. Cox, and F. D. Koop. 1974. “Analysis of laterally loaded piles in sand.” In Proc., 6th Annual Offshore Technol. Conf., 95–105. Houston: OTC.
Reese, L. C., and R. C. Welch. 1975. “Lateral loading of deep foundations in stiff clay.” J. Geotech. Geoenviron. Eng. 101 (Jul): 11456.
Ruan, J.-K., and W.-W. Zhu. 2018. “Sensitivity analysis of influencing factors of building slope stability based on orthogonal design and finite element calculation.” In Proc., E3S Web of Conf. Les Ulis, France: EDP Sciences.
Trinidad González, Y. 2017. “Comparison of design/analysis methods for pile reinforced slopes.” Master’s thesis. Dept. of Civil, Construction, and Environmental Engineering, Iowa State Univ.
Viggiani, C. 1981. “Ultimate lateral load on piles used to stabilize landslides.” In Proc., 10th Int. Conf. on Soil Mechanics and Foundation Engineering, 555–560. Rotterdam, Netherlands: A.A. Balkema.
Won, J., K. You, S. Jeong, and S. Kim. 2005. “Coupled effects in stability analysis of pile–slope systems.” Comput. Geotech. 32 (4): 304–315. https://doi.org/10.1016/j.compgeo.2005.02.006.
Wong, F. S. 1985. “Slope reliability and response surface method.” J. Geotech. Eng. 111 (1): 32–53. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:1(32).
Zhang, K., C. A. O. Ping, Z. Liu, H. Hu, and D. Gong. 2011. “Simulation analysis on three-dimensional slope failure under different conditions.” Trans. Nonferrous Met. Soc. China 21 (11): 2490–2502. https://doi.org/10.1016/S1003-6326(11)61041-8.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jul 30, 2019
Accepted: Apr 1, 2020
Published online: Jun 29, 2020
Published in print: Sep 1, 2020
Discussion open until: Nov 29, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.