Column Forces in a Buried Modular-Polymer Stormwater Collection Structure from Design-Truck Loading
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 146, Issue 7
Abstract
Results from full-scale physical experiments are reported to quantify the column forces that develop in a modular, polymer stormwater collection structure when buried at its minimum soil cover and subjected to design-truck loads. Columns located directly beneath the load pad experienced the largest increments in force from surface load. Load was also transferred through the soil and the structure to nearby columns. The four central columns carried on average 31% of the applied nominal design-truck load. Column forces from backfilling were found to be only 10% of the response from surface load. Factored column demand at the service design load (107 kN) was equal to 0.45 and 0.64 times the buckling resistance of the 0.6-m and 0.9-m-long columns tested. For the conditions tested, the columns satisfy AASHTO load and resistance factor design requirements against individual column buckling with a resistance factor of 0.7.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The physical experiments were funded by Brentwood Industries. New insights into column force distribution were funded by the Natural Sciences and Engineering Research Council of Canada. The experimental facility was developed with funds from the Canada Foundation for Innovation and the Ontario Innovation Trust. The assistance of Mr. G. Boyd in conducting the physical experiments is gratefully acknowledged.
References
AASHTO. 2012. LRFD bridge design specifications. 6th ed. Washington, DC: AASHTO.
Allen, T. M., A. S. Nowak, and R. J. Bathurst. 2005. Calibration to determine load and resistance factors for geotechnical and structural design. Washington, DC: Transportation Research Board.
ASTM. 2007. Standard test method for particle-size analysis of soils. ASTM D422. West Conshohocken, PA: ASTM.
ASTM. 2008. Standard test methods for determination of maximum dry unit weight and water content range for effective compaction of granular soils using a vibrating hammer. ASTM D7382. West Conshohocken, PA: ASTM.
ASTM. 2010. Standard test method for compressive properties of rigid plastics. ASTM D695. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using standard effort. ASTM D698. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test methods for minimum index density and unit weight of soils and calculation of relative density. ASTM D4254. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard practice for structural design of thermoplastic corrugated wall stormwater collection chambers. ASTM F2787-13. West Conshohocken, PA: ASTM.
Bass, B. J., T. J. McGrath, D. Mailhot, and K. W. Lim. 2010. “Design development of large thermoplastic chambers for stormwater retention.” J. ASTM Int. 7 (6): 1–12. https://doi.org/10.1520/JAI102861.
Becker, D. E. 1996. “Eighteenth Canadian geotechnical colloquium: Limit states design for foundations. Part I: An overview of the foundation design process.” Can. Geotech. J. 33 (6): 956–983. https://doi.org/10.1139/t96-124.
Brachman, R. W. I., and J. M. LeBlanc. 2017. “Short-term lateral response of a buried modular polymer stormwater collection structure to compaction and overburden pressure.” J. Geotech. Geoenviron. Eng. 143 (9): 04017070. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001762.
Brachman, R. W. I., I. D. Moore, and S. M. Munro. 2008. “Compaction effects on strains within profiled thermoplastic pipes.” Geosynthetics Int. 15 (2): 72–85. https://doi.org/10.1680/gein.2008.15.2.72.
Brachman, R. W. I., I. D. Moore, and R. K. Rowe. 2001. “The performance of a laboratory facility for evaluating the structural response small diameter buried pipes.” Can. Geotech. J. 38 (2): 260–275. https://doi.org/10.1139/t00-102.
Kwon, O. S., E. Kim, and S. Orton. 2011. “Calibration of live-load factor in LRFD bridge design specifications based on state-specific traffic environments.” J. Bridge Eng. 16 (6): 812–819. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000209.
McGrath, T. J., I. D. Moore, and G. Y. Hsuan. 2009. Updated test and design methods for thermoplastic drainage pipe. Washington, DC: Transportation Research Board.
Nowak, A. S. 1995. “Calibration of LRFD bridge code.” J. Struct. Eng. 121 (8): 1245–1251. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:8(1245).
Peterson, D. L., C. R. Nelson, G. Li, T. J. McGrath, and Y. Kitane. 2010. Recommended design specifications for live load distribution to buried structures. Washington, DC: Transportation Research Board.
Poulos, H. G., and E. H. Davis. 1974. Elastic solutions for soil and rock mechanics. New York: Wiley.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jul 14, 2019
Accepted: Jan 14, 2020
Published online: May 11, 2020
Published in print: Jul 1, 2020
Discussion open until: Oct 11, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.