Numerical Study of Mobilized Friction along Embedded Catenary Mooring Chains
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 145, Issue 10
Abstract
Understanding the soil resistance along an embedded anchor chain is imperative for efficient and economic design of an overall mooring system as it determines the magnitude and direction of the load at the padeye of the anchor. The tensioning process of an embedded chain for catenary moorings was modeled using a coupled Eulerian–Lagrangian (CEL) finite-element approach simulating the large deformations of the chain as it cuts through the soil to form an inverse catenary. The analyses reveal that the configuration of the embedded chain and the relationship between tension and chain angle at the padeye show excellent agreement with previously published analytical predictions. However, the ratio of the tension at the padeye to that at the mudline obtained from CEL is significantly higher than the theoretical values, mainly due to partial mobilization of the frictional soil resistance along the length of the chain. The CEL results indicate that the partial mobilization is a result of the combined-loading effect during failure of the soil around the embedded chain as it cuts through the seabed, in contrast with the conventional assumption that the ultimate frictional and normal soil resistances are mobilized simultaneously. A new design approach is proposed for calculating the local equivalent coefficient of friction based on the yield locus for a deeply embedded chain and the normality rule.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work forms part of the activities of the Centre for Offshore Foundation Systems. Established in 1997 under the Australian Research Council’s Special Research Centres Program and currently supported as a node of the Australian Research Council’s Centre of Excellence for Geotechnical Science and Engineering (ARC Grant No. CE110001009), and through the Fugro Chair in Geotechnics, the Lloyd’s Register Foundation Chair and Centre of Excellence in Offshore Foundations, and the Shell EMI Chair in Offshore Engineering. The first author is supported by an Australian Government Research Training Program Scholarship and a Fugro PhD Scholarship; the second author is supported by the National Natural Science Foundation of China (51890915); and the fifth author is supported as the Fugro Chair in Geotechnics. All support is gratefully acknowledged.
References
Aubeny, C. P., S. W. Han, and J. D. Murff. 2003. “Inclined load capacity of suction caissons.” Int. J. Numer. Anal. Methods Geomech. 27 (14): 1235–1254. https://doi.org/10.1002/nag.319.
Bhattacharjee, S., S. M. Majhi, D. Smith, and R. Garrity. 2014. “Serpentina FPSO mooring integrity issues and system replacement: Unique fast track approach.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Bransby, M. F., and M. F. Randolph. 1998. “Combined loading of skirted foundations.” Géotechnique 48 (5): 637–655. https://doi.org/10.1680/geot.1998.48.5.637.
Colliat, J.-L., S. Safinus, N. Boylan, and K. Schroeder. 2018. “Formation and development of seabed trenching from subsea inspection data of deepwater Gulf of Guinea moorings.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Dassault Systèmes. 2014. ABAQUS 6.14 analysis user’s manual. Providence, RI: Simulia Corp.
Degenkamp, G., and A. Dutta. 1989. “Soil resistances to embedded anchor chain in soft clay.” J. Geotech. Eng. 115 (10): 1420–1438. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:10(1420).
Dutta, A., and G. Degenkamp. 1989. “Behaviour of embedded mooring chains in clay during chain tensioning.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Ehlers, C. J., J. Chen, H. H. Roberts, and Y. C. Lee. 2005. “The origin of near-seafloor crust zones in deepwater.” In Proc., Int. Symp. on Frontiers in Offshore Geotechnics: ISFOG, 927–934. London: Taylor & Francis.
Frankenmolen, S. F., D. J. White, and C. D. O’Loughlin. 2016. “Chain-soil interaction in carbonate sand.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Gault, J. A., and W. R. Cox. 1974. “Method for predicting geometry and load distribution in an anchor chain from a single point mooring buoy to a buried anchorage.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Han, C., and J. Liu. 2017. “A modified method to estimate chain inverse catenary profile in clay based on chain equation and chain yield envelope.” Appl. Ocean Res. 68 (Oct): 142–153. https://doi.org/10.1016/j.apor.2017.08.016.
Kim, Y., M. S. Hossain, and D. Wang. 2015. “Dynamically installed anchors: Performance of embedded mooring chain profile in clay.” In Proc., 3rd Int. Symp. on Frontiers in Offshore Geotechnics, edited by Meyer, 881–886. London: Taylor & Francis.
Neubecker, S., and M. Randolph. 1995a. “Performance of embedded anchor chains and consequences for anchor design.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Neubecker, S., and M. Randolph. 1995b. “Profile and frictional capacity of embedded anchor chains.” J. Geotech. Eng. 121 (11): 797–803. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:11(797).
Neubecker, S., and M. Randolph. 1996. “The performance of drag anchor and chain systems in cohesive soil.” Marine Georesour. Geotechnol. 14 (2): 77–96. https://doi.org/10.1080/10641199609388305.
O’Neill, M. P., M. F. Bransby, and M. F. Randolph. 2003. “Drag anchor fluke-soil interaction in clays.” Can. Geotech. J. 40 (1): 78–94.
Randolph, M., and S. Gourvenec. 2011. Offshore geotechnical engineering. Boca Raton, FL: CRC Press.
Reese, L. C. 1973. “A design method for an anchor pile in a mooring system.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Rocha, M., F. Schnaid, C. Rocha, and C. Amaral. 2016. “Inverse catenary load attenuation along embedded ground chain of mooring lines.” Ocean Eng. 122 (Aug): 215–226. https://doi.org/10.1016/j.oceaneng.2016.06.027.
Vivatrat, V., P. J. Valent, and A. A. Ponterio. 1982. “The influence of chain friction on anchor pile design.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Wang, D., B. Bienen, M. Nazem, Y. Tian, J. Zheng, T. Pucker, and M. F. Randolph. 2015. “Large deformation finite element analyses in geotechnical engineering.” Comput. Geotech. 65 (Apr): 104–114. https://doi.org/10.1016/j.compgeo.2014.12.005.
Yen, B. C., and G. D. Tofani. 1984. “Soil resistance to stud link chain.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Zhao, Y., and H. Liu. 2013. “Large deformation finite element analysis of the anchor line embedded in seabed soils.” In Proc., ASME 2013 32nd Int. Conf. on Ocean, Offshore and Arctic Engineering. New York: ASME.
Zhao, Y., and H. Liu. 2014. “Numerical simulation of drag anchor installation by a large deformation finite element technique.” In Proc., ASME 2014 33rd Int. Conf. on Ocean, Offshore and Arctic Engineering. New York: ASME.
Zhao, Y., and H. Liu. 2016. “Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors.” Appl. Ocean Res. 54 (Jan): 101–114. https://doi.org/10.1016/j.apor.2015.10.007.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Nov 17, 2018
Accepted: Jun 2, 2019
Published online: Jul 30, 2019
Published in print: Oct 1, 2019
Discussion open until: Dec 30, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.