Measuring Retardation Factors of and Cations Using Column Test
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 145, Issue 9
Abstract
A flow-through column test setup was developed to measure the breakthrough curves of (Cs) and (Sr) cations in a natural silty sand. Advantages of this column setup include ensuring full saturation with a back-pressure technique and maintaining a constant hydraulic gradient condition with overflow design. The former eliminates large variations in retardation factor () from reduced surface sites for contaminant-retarding reactions and increased duration time, both caused by unsaturation. The latter creates a more realistic simulation of the field condition than a constant-flow-rate setup. The retardation factors of Sr and Cs cations were found to be 3.561 and 27.369, which were slightly lower than the range under similar but broader ranges of fines content and pH. This slight difference is attributed to the lower fines content of the soil, high input concentrations of both Cs and Sr, and the competing monovalent and divalent cations in the influent with high ionic strength. Although not significant in this study, particle migration was observed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is financial supported by the National Natural Science Foundation of China (Award No. 51779219). The financial support by AREVA Ltd., the One-Thousand-Young-Talents Program of the Organization Department of the CPC Central Committee and the 100-Talents Program of Zhejiang University to the corresponding author is deeply appreciated. MOE Key Laboratory of Soft Soils and Geoenvironmental Engineering is also acknowledged.
References
Ames, L. L., and D. Rai. 1978. Radionuclide interactions with soil and rock media. Las Vegas: Office of Radiation Programs, USEPA.
Angino, E. E., G. K. Billings, and N. Andersen. 1966. “Observed variations in the strontium concentration of sea water.” Chem. Geol. 1 (C): 145–153. https://doi.org/10.1016/0009-2541(66)90013-1.
ASTM. 2011. Standard practice for classification of soils for engineering purposes (Unified Soil Classification System). ASTM D2487. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard practices for preserving and transporting soil samples. ASTM D4220/D4220M. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test methods for measurement of hydraulic conductivity of saturated porous materials using a flexible wall permeameter. ASTM D5084. West Conshohocken, PA: ASTM.
Benson, C. H., H. Zhai, and X. Wang. 1994. “Estimating hydraulic conductivity of compacted clay liners.” J. Geotech. Eng. 120 (2): 366–387. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:2(366).
Chapuis, R. P. 2004. “Predicting the saturated hydraulic conductivity of sand and gravel using effective diameter and void ratio.” Can. Geotech. J. 41 (5): 787–795. https://doi.org/10.1139/t04-022.
Chapuis, R. P., and M. Aubertin. 2003. “On the use of the Kozeny-Carman equation to predict the hydraulic conductivity of soils.” Can. Geotech. J. 40 (3): 616–628. https://doi.org/10.1139/t03-013.
Chen, X., G. N. Chen, B. Bate, and Y. C. Li. 2018. “Extrapolating and from breakthrough curves of Cesium cations transporting through a soil column.” In Proc., 8th Int. Congress on Environmental Geotechnics. Springer: Singapore.
Flury, M., S. Czigány, G. Chen, and J. B. Harsh. 2004. “Cesium migration in saturated silica sand and Hanford sediments as impacted by ionic strength.” J. Contam. Hydrol. 71 (1): 111–126. https://doi.org/10.1016/j.jconhyd.2003.09.005.
Fredlund, D. G., H. Rahardjo, and M. D. Fredlund. 2012. Unsaturated soil mechanics in engineering practice. Hoboken, NJ: Wiley.
Hong, C. S., and C. D. Shackelford. 2017. “Long-term column testing of zeolite-amended backfills. II: Solute transport properties.” J. Geotech. Geoenviron. Eng. 143 (9): 04017051. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001734.
Inui, T., T. Katsumi, and A. Takai. 2017. “Effects of cations on cesium sorption/desorption characteristics of soil layer for containment of radioactively polluted waste.” In Proc., 19th Int. Conf. on Soil Mechanics and Geotechnical Engineering. 3131–3134. Seoul: International Society for Soil Mechanics and Geotechnical Engineering.
Javadi, S., M. Ghavami, Q. Zhao, and B. Bate. 2017. “Advection and retardation of non-polar contaminants in compacted clay barrier material with organoclay amendment.” Appl. Clay Sci. 142: 30–39. https://doi.org/10.1016/j.clay.2016.10.041.
Li, M. H., T. H. Wang, and S. P. Teng. 2009. “Experimental and numerical investigations of effect of column length on retardation factor determination: A case study of cesium transport in crushed granite.” J. Hazard. Mater. 162 (1): 530–535. https://doi.org/10.1016/j.jhazmat.2008.05.076.
Lindsay, W. L. 1979. Chemical equilibria in soils. New York: Wiley.
Liu, C., J. M. Zachara, and S. C. Smith. 2004. “A cation exchange model to describe Cs+ sorption at high ionic strength in subsurface sediments at Hanford site, USA.” J. Contam. Hydrol. 68 (3–4): 217–238. https://doi.org/10.1016/S0169-7722(03)00143-8.
McKinley, J. P., J. M. Zachara, S. M. Heald, A. Dohnalkova, M. G. Newville, and S. R. Sutton. 2004. “Microscale distribution of cesium sorbed to biotite and muscovite.” Environ. Sci. Technol. 38 (4): 1017–1023. https://doi.org/10.1021/es034569m.
Papelis, C. 2001. “Cation and anion sorption on granite from the Project Shoal Test Area, near Fallon, Nevada, USA.” Adv. Environ. Res. 5 (2): 151–166. https://doi.org/10.1016/S1093-0191(00)00053-8.
Porro, I., M. E. Newman, and F. M. Dunnivant. 2000. “Comparison of batch and column methods for determining strontium distribution coefficients for unsaturated transport in basalt.” Environ. Sci. Technol. 34 (9): 1679–1686. https://doi.org/10.1021/es9901361.
Reddy, K. R., and A. Z. Al-Hamdan. 2013. “Enhanced sequential flushing process for removal of mixed contaminants from soils.” Water Air Soil Pollut. 224 (12): 1709. https://doi.org/10.1007/s11270-013-1709-8.
Reddy, K. R., A. Z. Al-Hamdan, and P. Ala. 2011. “Enhanced soil flushing for simultaneous removal of pahs and heavy metals from industrial contaminated soil.” J. Hazardous Toxic Radioactive Waste 15 (3): 166–174. https://doi.org/10.1061/(ASCE)HZ.1944-8376.0000076.
Redmond, P., and C. D. Shackelford. 1994. “Design and evaluation of a flow pump system for column testing.” Geotech. Test. J. 17 (3): 269–281. https://doi.org/10.1520/GTJ10102J.
Reynolds, W. D., R. W. Gillham, and J. A. Cherry. 1982. “Evaluation of distribution coefficients for the prediction of strontium and cesium migration in a uniform sand.” Can. Geotech. J. 19 (1): 92–103. https://doi.org/10.1139/t82-008.
Richter, B. E., B. A. Jones, J. L. Ezzell, and N. L. Porter. 1996. “Accelerated solvent extraction: A technique for sample preparation.” Anal. Chem. 68 (6): 1033–1039. https://doi.org/10.1021/ac9508199.
Shackelford, C. D. 1995. “Cumulative mass approach for column testing.” J. Geotech. Eng. 121 (10): 696–703. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:10(696).
Shackelford, C. D., and P. L. Redmond. 1995. “Solute breakthrough curves for processed kaolin at low flow rates.” J. Geotech. Eng. 121 (1): 17–32. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:1(17).
Sposito, G. 1989. The chemistry of soils. Oxford, UK: Oxford University Press.
Taylor, R. N. 2005. Geotechnical centrifuge technology. Glasgow, Scotland: Blackie Academic and Professional.
Turekian, K. K., and K. H. Wedepohl. 1961. “Distribution of the elements in some major units of the earth’s crust.” GSA Bull. 72 (2): 175–192. https://doi.org/10.1130/0016-7606(1961)72[175:DOTEIS]2.0.CO;2.
USEPA. 1999a. “The model, methods of measurement, and application of chemical reaction codes.” Vol. 1 of Understanding variation in partition coefficient, Kd, values. Washington, DC: Office of Air and Radiation, USEPA.
USEPA. 1999b. “Review of geochemistry and available values for cadmium, cesium, chromium, lead, plutonium, radon, strontium, thorium, tritium (3H), and uranium.” Vol. 2 of Understanding variation in partition coefficient, , values. Washington, DC: Office of Air and Radiation, USEPA.
USEPA. 1999c. “Review of geochemistry and available Kd values for americium, arsenic, curium, iodine, neptunium, radium, and technetium.” Vol. 3 of Understanding variation in partition coefficient, , values. Washington, DC: Office of Air and Radiation, USEPA.
van Genuchten, M. T., and P. J. Wierenga. 1986. “Solute dispersion coefficients and retardation factors.” In Methods of soil analysis, part 1, Physical and Mineralogical Methods-Agronomy Monograph No. 9, edited by A. Klute, 2nd ed. 1025–1054. Madison, WI: American Society of Agronomy-Soil Science Socieity of America.
Vienken, T., and P. Dietrich. 2011. “Field evaluation of methods for determining hydraulic conductivity from grain size data.” J. Hydrol. 400 (1): 58–71. https://doi.org/10.1016/j.jhydrol.2011.01.022.
Zachara, J. M., S. C. Smith, C. Liu, J. P. McKinley, R. J. Serne, and P. L. Gassman. 2002. “Sorption of Cs+ to micaceous subsurface sediments from the Hanford site, USA.” Geochim. Cosmochim. Acta 66 (2): 193–211. https://doi.org/10.1016/S0016-7037(01)00759-1.
Zeng, X. 2015. “Similitude for centrifuge modelling of heavy metal migration in clay barrier and method for evaluating breakthrough time.” Ph.D. dissertation, Institute of Geotechnical Engineering, College of Civil Engineering and Architecture, Zhejiang Univ.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Apr 4, 2018
Accepted: Mar 11, 2019
Published online: Jul 8, 2019
Published in print: Sep 1, 2019
Discussion open until: Dec 8, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.