Screening Tests to Limit Geomembrane Strain from Gravel Indentations
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 144, Issue 6
Abstract
Tensile strains from gravel indentations in a 1.5-mm-thick high-density polyethylene geomembrane are reported. Strains were imposed using a single steel probe in test cells that are shown to simulate the mean response of nominal 25- and 50-mm poorly graded angular coarse gravels under vertical pressure. New to the assessment of geotextile protection, the screening tests were conducted at 55°C for 100 h to accelerate creep. Strains were also calculated from the deformed shape of the indentation using a new thin plate method not requiring assumptions that underestimate maximum strain. Additionally, a long-term creep factor recently deduced from time-temperature-superposition was used to account for differences between test and field conditions. Very thick geotextiles were required to limit long-term geomembrane strain to allowable strains of 3 or 6% for 25-mm nominal gravel. None of the geotextiles tested were able to adequately limit strain for the nominal 50-mm gravel.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded by the Natural Sciences and Engineering Research Council of Canada.
References
Abdelaal, F. B., Rowe, R. K., and Brachman, R. W. I. (2014). “Brittle rupture of an aged HDPE geomembrane at local gravel indentations under simulated field conditions.” Geosynthetics Int., 21(1), 1–23.
ASTM. (2012a). “Standard test methods for laboratory compaction characteristics of soil using modified effort.” ASTM 1557, West Conshohocken, PA.
ASTM. (2012b). “Standard test methods for laboratory compaction characteristics of soil using standard effort.” ASTM D698, West Conshohocken, PA.
ASTM. (2014a). “Standard test method for large scale hydrostatic puncture testing of geosynthetics.” ASTM D5514, West Conshohocken, PA.
ASTM. (2014b). “Standard test method for the static puncture strength of geotextiles and geotextile-related products using a 50-mm probe.” ASTM D6241, West Conshohocken, PA.
Atmatzidis, D. K., Chrysikos, D. A., Blantzoukas, T. N., and Kondyli, A. T. (2008). “Long-term protection efficiency of nonwoven polypropylene geotextiles.” Proc., Geosynthetics in Civil and Environmental Engineering, G. Li, Y. Chen, and X. Tang, eds., Springer, Berlin.
Brachman, R. W. I., and Eastman, M. K. (2013). “Calculating local geomembrane indentation strains from measured radial and vertical displacements.” Geotext. Geomembr., 40, 58–68.
Brachman, R. W. I., and Gudina, S. (2008). “Gravel contacts and geomembrane strains for a GM/CCL composite liner.” Geotext. Geomembr., 26(6), 448–459.
Brachman, R. W. I., and Sabir, A. (2013). “Long-term assessment of a layered-geotextile protection layer for geomembranes.” J. Geotech. Geoenviron. Eng., 752–764.
Daniel, D., and Benson, C. (1990). “Water content-density criteria for compacted soil liners.” J. Geotech. Eng., 1811–1830.
Dickinson, S., and Brachman, R. W. I. (2008). “Assessment of alternative protection layers for a geomembrane/geosynthetic clay liner (GM/GCL) composite liner.” Can. Geotech. J., 45(11), 1594–1610.
Eastman, M. K. (2013). “Calculating and limiting local strains in geomembranes from gravel indentations.” M.A.Sc. thesis, Queen’s Univ., Kingston, Canada.
Ehrenberg, H., and von Maubeuge, K. P. (2017). “Protection geotextiles for geomembranes in landfill applications.” Proc., Geotechnical Frontiers, Industrial Fabrics Association International, Roseville, MN, 64–76.
Eldesouky, H. M. G., and Brachman, R. W. I. (2018). “Calculating local geomembrane strains from a single gravel particle with thin plate theory.” Geotext. Geomembr., 46(1), 101–110.
Ewais, A. M. R., Rowe, R. K., Brachman, R. W. I., and Arnepalli, D. N. (2014). “Service life of a high-density polyethylene geomembrane under simulated landfill conditions at 85°C.” J. Geotech. Geoenviron. Eng., 04014060.
Gallagher, E. M., Darbyshire, W., and Warwick, R. G. (1999). “Performance testing of landfill geoprotectors: Background, critique, development, and current UK Practice.” Geosynth. Int., 6(4), 283–301.
Koerner, R. M., Hsuan, Y. G., Koerner, G. R., and Gryger, D. (2010). “Ten year creep puncture study of HDPE geomembranes protected by needle-punched nonwoven geotextiles.” Geotext. Geomembr., 28(6), 503–513.
MoE (Ontario Ministry of the Environment). (1998). Landfill standards: A guideline on the regulatory and approval requirements for new or expanding landfilling sites, Toronto.
Peggs, I. D., Schmucker, B., and Carey, P. (2005). “Assessment of maximum allowable strains in polyethylene and polypropylene geomembranes.” Proc., Geo-Frontiers, ASCE, Reston, VA.
Rowe, R. K. (2012). “Short and long-term leakage through composite liners, The 7th Arthur Casagrande Lecture.” Can. Geotech. J., 49(2), 141–169.
Rowe, R. K., Abdelaal, F. B., and Brachman, R. W. I. (2013). “Antioxidant depletion of HDPE geomembrane with sand protection layer.” Geosynthetics Int., 20(2), 73–89.
Rowe, R. K., and Islam, M. Z. (2009). “Impact of landfill liner time–temperature history on the service life of HDPE geomembranes.” Waste Manage., 29(10), 2689–2699.
Rowe, R. K., Islam, M. Z., and Hsuan, Y. G. (2010). “Effect of thickness on the ageing of HDPE geomembranes.” J. Geotech. Geoenviron. Eng., 299–309.
Rowe, R. K., Quigley, R. M., Brachman, R. W. I., and Booker, J. R. (2004). Barrier systems for waste disposal facilities, Taylor & Francis, London.
Sabir, A., and Brachman, R. W. I. (2012). “Time and temperature effects on geomembrane strain from a gravel particle subject to sustained vertical force.” Can. Geotech. J., 49(3), 249–263.
Seeger, S., and Müller, W. (2003). “Theoretical approach to designing protection: Selecting a geomembrane strain criterion.” Proc., Geosynthetics: Protecting the Environment, N. Dixon, D. M. Smith, J. H. Greenwood, and D. R. V. Jones, eds., Thomas Telford, London, 137–152.
Seitz, J. T., and Balazs, C. F. (1968). “Application of time-temperature superposition principle to long term engineering properties of plastic materials.” Polymer Eng. Sci., 8(2), 151–160.
Tognon, A. R., Rowe, R. K., and Moore, I. D. (2000). “Geomembrane strain observed in large-scale testing of protection layers.” J. Geotech. Geoenviron. Eng., 1194–1208.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 27, 2017
Accepted: Nov 1, 2017
Published online: Apr 6, 2018
Published in print: Jun 1, 2018
Discussion open until: Sep 6, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.