Paul-Mohr-Coulomb Failure Criterion for Geomaterials
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 144, Issue 2
Abstract
Paul-Mohr-Coulomb (PMC) failure criterion provides enhanced representations of pyramidal failure surfaces, with recognizable material parameters, by considering all three principal stresses. PMC exhibits traits of more complex failure criteria through piecewise linear approximations to a curve failure surface, in changing both mean stress and Lode angle. A new least-squares fitting approach is developed to determine three PMC material parameters: two friction angles, one for compression and one for extension, and the theoretical isotropic tensile strength (the vertex of the pyramid). Experimental data from axisymmetric compression and extension tests are used to construct a six-sided pyramidal failure surface, revealing that the friction angle in extension is larger than the friction angle in compression for isotropic geomaterials, a manifestation of the intermediate stress effect. To enhance the description of the failure surface, multiaxial test data are added, and six parameters are determined by fitting two planes independently with four friction angles and two different vertices. The six-parameter PMC model is able to approximately capture the nonlinear nature of the failure surface for both rock and soil.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was partially funded by the China Scholarship Council (CSC) and the MSES/Miles Kersten Chair.
References
Bishop, A. W. (1966). “The strength of soils as engineering materials.” Géotechnique, 16(2), 91–130.
Bobich, J. K. (2005). “Experimental analysis of the extension to shear fracture transition in Berea sandstone.” M.S. thesis, Texas A&M Univ., College Station, TX.
Bolton, M. D. (1986). “The strength and dilatancy of sands.” Géotechnique, 36(1), 65–78.
DiMaggio, F. L., and Sandler, I. S. (1971). “Material model for granular soils.” J. Eng. Mech. Div., 97(3), 935–950.
Goldscheider, M. (1984). “True triaxial tests on dense sand.” Int. Workshop on Constitutive Relations for Soils, G. Gudehus, F. Darve, and I. Vardoulakis, eds., A.A.Balkema, Rotterdam, Netherlands, 11–54.
Haimson, B., and Rudnicki, J. W. (2010). “The effect of the intermediate principal stress on fault formation and fault angle in siltstone.” J. Struct. Geol., 32(11), 1701–1711.
Henkel, D. J. (1960). “The shear strength of saturated remolded clays.” Proc., Research Conf. on Shear Strength of Cohesive Soils, ASCE, Reston, VA, 533–554.
Hoek, E., and Brown, E. T. (1980). “Empirical strength criterion for rock masses.” J. Geotech. Geoenviron. Eng., 106(9), 1013–1035.
Hvorslev, M. J. (1960). “Physical components of the shear strength of saturated clays.” Proc., Research Conf. on Shear Strength of Cohesive Soils, ASCE, Reston, VA, 169–273.
Ingraham, M. D., Issen, K. A., and Holcomb, D. J. (2013). “Response of Castlegate sandstone to true triaxial states of stress.” J. Geophys. Res., 118(2), 536–552.
Kirkpatrick, W. M. (1957). “The condition of failure for sands.” Proc., 4th Int. Conf. on Soil Mechanics, Vol. 1, Butterworths, London, 172–178.
Labuz, J. F., Dai, S. T., and Papamichos, E. (1996). “Plane-strain compression of rock-like materials.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 33(6), 573–584.
Lam, W. K., and Tatsuoka, F. (1988). “Effects of initial anisotropic fabric and on strength and deformation characteristics of sand.” Soils Found., 28(1), 89–106.
Makhnenko, R. Y., Harvieux, J., and Labuz, J. F. (2015). “Paul-Mohr-Coulomb failure surface of rock in the brittle regime.” Geophys. Res. Lett., 42(17), 6975–6981.
Meyer, J. P., and Labuz, J. F. (2013). “Linear failure criteria with three principal stresses.” Int. J. Rock Mech. Min. Sci., 60, 180–187.
Mogi, K. (1967). “Effect of the intermediate principal stress on rock failure.” J. Geophys. Res., 72(20), 5117–5131.
Mogi, K. (1971). “Fracture and flow of rocks under high triaxial compression.” J. Geophys. Res., 76(5), 1255–1269.
Nayak, G. C., and Zienkiewicz, O. C. (1972). “Convenient form of stress invariants for plasticity.” J. Struct. Div., 98(4), 949–954.
Parry, R. H. G. (1960). “Triaxial compression and extension tests on remoulded saturated clay.” Géotechnique, 10(4), 166–180.
Paul, B. (1961). “A modification of the Coulomb-Mohr theory of fracture.” J. Appl. Mech., 28(2), 259–268.
Paul, B. (1968). “Generalized pyramidal fracture and yield criteria.” Int. J. Solids Struct., 4(2), 175–196.
Reades, D. W., and Green, G. E. (1976). “Independent stress control and triaxial extension tests on sand.” Géotechnique, 26(4), 551–576.
Reddy, K. R., and Saxena, S. K. (1993). “Effects of cementation on stress-strain and strength characteristics of sands.” Soils Found., 33(4), 121–134.
Roscoe, K. H., Schofield, A., and Wroth, C. P. (1958). “On the yielding of soils.” Géotechnique, 8(1), 22–53.
Sutherland, H. B., and Mesdary, M. S. (1969). “The influence of the intermediate principal stress on the strength of sand.” Proc., 7th Int. Conf. on Soil Mechanics and Foundation Engineering, Vol. 1, International Society of Soil Mechanics and Foundation Engineering, Mexico, 391–399.
Wiebols, G. A., and Cook, N. G. W. (1968). “An energy criterion for the strength of rock in polyaxial compression.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 5(6), 529–549.
Wu, W., and Kolymbas, D. (1991). “On some issues in triaxial extension tests.” Geotech. Test. J., 14(3), 276–287.
Zhang, L., and Zhu, H. (2007). “Three-dimensional Hoek-Brown strength criterion for rocks.” J. Geotech. Geoenviron. Eng., 1128–1135.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Dec 22, 2016
Accepted: Aug 4, 2017
Published online: Dec 13, 2017
Published in print: Feb 1, 2018
Discussion open until: May 13, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.