Calibration of Soil-Steel Grid Pullout Models Using a Statistical Approach
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 144, Issue 2
Abstract
Steel grids in the form of bar mat and welded wire mesh are a common reinforcing material in mechanically stabilized earth (MSE) walls. This paper uses a large database of laboratory steel grid pullout tests from multiple sources to evaluate the accuracy of different ultimate pullout capacity models in a consistent statistical framework. Included in the study is a recent empirical-based pullout model for steel grid pullout in frictional soils that is now extended to include cohesive-frictional soils. This model is shown to be more accurate than previous models with default parameters based on analysis of bias statistics. The same calibrated model is shown to be accurate when compared with the results of in situ steel grid pullout tests performed in production walls constructed with cohesive-frictional soils. The new default model is shown to be more accurate than previous models, including the current Federal Highway Administration (FHWA) default model that is most common in North America for design against pullout in MSE walls constructed with frictional (granular) soils. The bias statistics reported for each pullout model in this study are also a prerequisite to compute resistance factors in load and resistance factor design (LRFD) for the pullout limit state using reliability theory–based calibration methods.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for funding awarded by the Scholarship and Education Foundation of the National Defense Academy of Japan to carry out this study, including support for the third author to work on this project while in Japan. The second author was supported by a grant from the Natural Sciences and Engineering Research Council of Canada (NSERC) awarded to the third author. The authors wish to thank Mr. K. Terao for granting permission to use unpublished data from Geosystem Corp.
References
AASHTO. (2014). LRFD bridge design specifications, 7th Ed., Washington, DC.
Alam, M. J. I. (2012). “Pull-out behaviour of steel grid soil reinforcement in silty sand.” Masters thesis, Univ. of New South Wales, Sydney, Australia.
Alam, M. J. I., Lo, S. R., and Karim, M. R. (2014). “Pull-out behaviour of steel grid soil reinforcement embedded in silty sand.” Comput. Geotech., 56, 216–226.
Allen, T. M., Christopher, B. R., Elias, V., and DiMaggio, J. D. (2001). “Development of the simplified method for internal stability design of mechanically stabilized earth (MSE) walls.”, Washington State Dept. of Transportation, Olympia, WA, 96.
Allen, T. M., Nowak, A. S., and Bathurst, R. J. (2005). “Calibration to determine load and resistance factors for geotechnical and structural design.”, Transportation Research Board, National Research Council, Washington, DC.
Bathurst, R. J. (2014). “LRFD calibration of simple limit state functions in geotechnical soil-structure design.” Chapter 8, Reliability-based design in geotechnical engineering: Computations and applications, K. K. Phoon and J. Ching, eds., Spon, Oxfordshire, U.K., 339–354.
Bathurst, R. J., Allen, T. M., and Nowak, A. S. (2008). “Calibration concepts for load and resistance factor design (LRFD) of reinforced soil walls.” Can. Geotech. J., 45(10), 1377–1392.
Bathurst, R. J., Huang, B., and Allen, T. M. (2011). “Load and resistance factor design (LRFD) calibration for steel grid reinforced soil walls.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards, 5(3–4), 218–228.
Bathurst, R. J., Javankhoshdel, S., and Allen, T. M. (2017). “LRFD calibration of simple soil-structure limit states considering method bias and design parameter variability.” J. Geotech. Geoenviron. Eng., 04017053.
Bergado, D. T., Lo, K. H., Chai, J. C., Shivashankar, R., Alfaro, M. C., and Anderson, L. R. (1992). “Pullout tests using steel grid reinforcements with low-quality backfill.” J. Geotech. Eng., 1047–1062.
Bloomfield, R. A. (1984). Proposed design modifications: VSL retained earth, VSL Corporation, Bern, Switzerland.
Canadian Geotechnical Society. (2006). Canadian foundation engineering manual, 4th Ed., Richmond, BC, Canada.
Canadian Standards Association. (2014). “Canadian highway bridge design code.”, Mississauga, ON, Canada.
Chang, J. C., Hannon, J. B., and Forsyth, R. A. (1977). “Pull resistance and interaction of earthwork reinforcement and soil.” Transp. Res. Rec., 640, 1–6.
Fenton, G. A., Naghibi, F., Dundas, D., Bathurst, R. J., and Griffiths, D. V. (2016). “Reliability-based geotechnical design in the 2014 Canadian highway bridge design code.” Can. Geotech. J., 53(2), 236–251.
FHWA (Federal Highway Administration). (2009). “Design and construction of mechanically stabilized earth walls and reinforced soil slopes: Vols. 1 and 2.”, Washington, DC.
Forsyth, R. A. (1978). “Alternate earth reinforcements.” Proc., ASCE Symp. on Reinforced Earth, ASCE, Reston, VA, 358–370.
Huang, B., and Bathurst, R. J. (2009). “Evaluation of soil-geogrid pullout models using a statistical approach.” ASTM Geotech. Test. J., 32(6), 489–504.
Huang, B., Bathurst, R. J., and Allen, T. M. (2012). “Load and resistance factor design (LRFD) calibration for steel strip reinforced soil walls.” J. Geotech. Geoenviron. Eng., 922–933.
Ingold, T. S. (1983). “Laboratory pull-out testing of grid reinforcements in sand.” Geotech. Test. J., 6(3), 101–111.
Jayawickrama, P. W., Surles, J. G., Wood, T. A., and Lawson, W. D. (2013). “Pullout resistance of mechanically stabilized earth reinforcement in backfills typically used in Texas: Volume 1.”, Texas DOT, Austin, TX.
Jewell, R. A. (1990). “Reinforcement bond capacity.” Geotechnique, 40(3), 513–518.
Jewell, R. A., Milligan, G. W. E., Sarsby, R. W., and Dubois, D. (1984). “Interaction between soil and geogrids.” Proc., Symp. on Polymer Grid Reinforcement in Civil Engineering, Thomas Telford, London, 18–30.
Lajevardi, S. H., Dias, D., and Racinais, J. (2013). “Analysis of soil-welded steel mesh reinforcement interface interaction by pull-out tests.” Geotext. Geomembr., 40(1), 48–57.
Matsui, T., San, K. C., Nabeshima, Y., and Amin, U. N. (1996). “Bearing mechanism of steel grid reinforcement in pullout test.” Proc., Int. Symp. on Earth Reinforcement, Vol. 1, A.A. Balkema, Rotterdam, Netherlands, 101–105.
Mitchell, J. K., and Villet, W. C. B. (1987). “Reinforcement of earth slopes and embankments.”, National Research Council, Washington, DC.
Miyata, Y., and Bathurst, R. J. (2012). “Analysis and calibration of default steel strip pullout models used in Japan.” Soils Found., 52(3), 481–497.
Mohan, V. K. D., Kim, H., Balunaini, U., and Prezzi, M. (2016). “Pullout capacity of ladder-type metal reinforcements in tire shred-sand mixtures.” Constr. Build. Mater., 113(15), 544–552.
Nabeshima, Y., Matsui, T., Zhou, S. G., and Tsuruta, S. (1999). “Elucidation of reinforcing mechanism and evaluation of bearing resistance in steel grid reinforced earth.” J. JSCE, 638/III-49, 251–258 (in Japanese).
National Research Council. (2010). National building code of Canada, 13th Ed., Ottawa.
Neely, W. J. (1995). “Pullout-out resistance of VSL bar mats for use with the FHWA structure stiffness design method.”, Federal Highway Administration, Washington, DC.
Oode, K., Terao, K., Sumita, S., Jin, C., Ogawa, N., and Hongo, T. (2015). “Evaluation of pull out resistance of grid type steel reinforcement in the earth: Study of evaluation equation for application.” Proc., Japanese Geotechnical Society Annual Meeting, Japanese Geotechnical Society, Tokyo, 1645–1646 (in Japanese).
Palmeira, E. M. (1987). “The study of soil reinforcement interaction by means of large scale laboratory tests.” Ph.D. thesis, Oxford Univ., Oxford, U.K.
Palmiera, E. M., and Milligan, G. W. E. (1989). “Scale and other factors affecting the results of pull-out tests of grids buried in sand.” Geotechnique, 39(3), 511–542.
Peterson, L. M., and Anderson, L. R. (1980). “Pullout resistance of welded wire mats embedded in soil.” M.S. thesis, Utah State Univ., Logan, UT.
Sukmak, K., Sukmak, P., Horpibulsuk, S., Han, J., Shen, S. L., and Arulrajah, A. (2015). “Effect of fine content on the pullout resistance mechanism of bearing reinforcement embedded in cohesive-frictional soils.” Geotext. Geomembr., 43(2), 107–117.
Sumita, S., Terao, K., Oode, K., Jin, C., Ogawa, N., and Hongo, T. (2015). “Evaluation of pull out resistance of grid type steel reinforcement in the earth: Study of evaluation equation for pull out resistance.” Proc., Japanese Geotechnical Society Annual Meeting, Japanese Geotechnical Society, Tokyo, 1643–1644 (in Japanese).
Uchihata, K., Sakata, N., Ogawa, N., Matsui, T., and Nabeshima, Y. (2000). “Design concept and some case histories of steel grid reinforced earth wall.” Proc., 10th Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Mountain View, CA, 386–390.
Yamanouchi, T. (1993). “Historical review of geotextiles for reinforcement of earth works in Asia.” Proc., 2nd Int. Symp. on Earth Reinforcement, Vol. 2, A.A. Balkema, Rotterdam, Netherlands, 737–751.
Yonekura, R., Yamazaki, J., Furiya, M., Nakayama, M., and Kobayashi, H. (1989). “The reinforced earth wall with reinforcements of metal grid and plate anchors.” Proc., 24th Japanese Geotechnical Society Annual Meeting, Japanese Geotechnical Society, Tokyo, 29–30 (in Japanese).
Yu, Y., and Bathurst, R. J. (2015). “Analysis of soil-steel bar mat pullout models using a statistical approach.” J. Geotech. Geoenviron. Eng., 04015006.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 144 • Issue 2 • February 2018
Copyright
©2017 American Society of Civil Engineers.
History
Received: Oct 22, 2016
Accepted: Jun 30, 2017
Published online: Nov 24, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 24, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.