Borehole Erosion Test
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 143, Issue 8
Abstract
Soil erosion is a major problem in civil engineering. It is involved in bridge scour, meander migration, levee overtopping, internal erosion of earth dams, surface erosion of embankments, and cliff erosion. The best way to predict the erodibility of a soil is to measure it directly on a site-specific basis by in situ testing in the field or by testing samples in the laboratory. The borehole erosion test (BET) is a new in situ soil-erosion test proposed to measure the erosion of the walls of a borehole while wet rotary drilling takes place. The increase in diameter of the borehole is measured with borehole calipers as a function of time and for a given flow velocity. The result is a profile of soil erodibility as a function of depth. Tests in clay and in sand conducted at the National Geotechnical Experimentation Sites at Texas A&M University are presented and compared with laboratory soil-erodibility tests with the erosion function apparatus (EFA) on samples taken from the same borehole. Computational fluid dynamics (CFD) numerical simulations of the velocity and shear stress field for the BET are also presented. The experimental and numerical results show the lessons learned and lead to an evaluation of the advantages and drawbacks of this new test.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The sponsor of this work was the Texas A&M Transportation Institute. We also wish to acknowledge the help of Fugro for their contribution in the field work and of other Ph.D. students at Texas A&M University: Mohammadreza Keshavarz, Iman Shafii, and Layal Maddah.
References
ASTM. (2006). “Standard test method for identification and classification of dispersive clay soils by the pinhole test.” ASTM D4647-93, West Conshohocken, PA.
Benahmed, S., and Bonelli, S. (2012). “Internal erosion of cohesive soils: Laboratory parametric study.” 6th Int. Conf. on Scour and Erosion, SHF (Société Hydrotechnique de France), Paris.
Bloomquist, D., Sheppard, D. M., Schofield, S., and Crowley, R. W. (2012). “The rotating erosion testing apparatus (RETA): A laboratory device for measuring erosion rates versus shear stresses of rock and cohesive materials.” Geotech. Test. J., 35(4), 641–648.
Briaud, J.-L. (1997). “The National Geotechnical Experimentation Sites at Texas A&M University—Clay and sand: A summary.” Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX.
Briaud, J.-L. (2008). “Case histories in soil and rock erosion: Woodrow Wilson Bridge, Brazos River Meander, Normandy Cliffs, and New Orleans levees.” J. Geotech. Geoenviron. Eng., 1425–1447.
Briaud, J.-L. (2013). Geotechnical engineering: Unsaturated and saturated soils, Wiley, New York.
Briaud, J.-L. (2014). “Disclosure of invention: The borehole erosion test.”, Texas A&M Univ., College Station, TX.
Briaud, J.-L., Bernhardt, M., and Leclair, M. (2012). “The pocket erodometer test: Development and preliminary results.” Geotech. Test. J., 35(2), 342–352.
Briaud, J.-L., Chedid, M., and Shidlovskaya, A. (2016). “The borehole erosion test.” Proc., 8th Int. Conf. on Scour and Erosion, CRC Press/A.A. Balkema, Leiden, Netherlands, 12–15.
Briaud, J.-L., Chen, H.-C., Kwak, K., Han, S., and Ting, F. (2001a). “Multiflood and multilayer method for scour rate prediction at bridge piers.” J. Geotech. Geoenviron. Eng., 114–125.
Briaud, J.-L., Ting, F., Chen, H. C., Cao, Y., Han, S.-W., and Kwak, K. (2001b). “Erosion function apparatus for scour rate predictions.” J. Geotech. Geoenviron. Eng., 105–113.
Chapuis, R. P., and Gatien, T. (1986). “An improved rotating cylinder technique for quantitative measurements of the scour resistance of clays.” Can. Geotech. J., 23(1), 83–87.
Chen, H. C. (2002). “Numerical simulation of scour around complex piers in cohesive soil.” Proc., First Int. Conf. on Scour of Foundations, Texas Transportation Institute, Texas A&M Univ., College Station, TX, 14–33.
Chen, H. C., and Patel, V. C. (1988). “Near-wall turbulence models for complex flows including separation.” AIAA J., 26(6), 641–648.
Chen, H. C., Patel, V. C., and Ju, S. (1990). “Solutions of Reynolds-averaged Navier-Stokes equations for three-dimensional incompressible flows.” J. Comput. Phys., 88(2), 305–336.
Crowley, R. W., Bloomquist, D. B., Shah, F. D., and Holst, C. M. (2012). “The sediment erosion rate flume (SERF): A new testing device for measuring soil erosion rate and shear stress.” ASTM Geotech. Test. J., 35(4), 649–659.
Gabr, M. A. (2014). “In situ erosion evaluation probe (ISEEP).” ⟨http://coastalhazardscenter.org/dev/wp-content/uploads/2012/05/GABR-ISEEP-2014-Annual-Meeting.pdf⟩ (May 20, 2016).
Hanson, G. J. (1990). “Surface erodibility of earthern channels at high stresses. Part I—Open channel testing.” Trans. ASAE, 33(1), 127–131.
Hanson, G. J., and Cook, K. R. (2004). “Apparatus, test procedures and analytical methods to measure soil erodibility in situ.” Appl. Eng. Agric., 20(4), 455–462.
Kim, H. S., and Chen, H. C. (2014). “Three-dimensional numerical analysis of sediment transport around abutments in channel bend.” Int. Conf. on Coastal Engineering, ASCE, Reston, VA.
Kim, H. S., Chen, H. C., and Briaud, J. L. (2016). “Numerical simulation of scour infilling in overset grid.” 8th Int. Conf. on Scour and Erosion, CRC Press/A.A. Balkema, Leiden, Netherlands.
Lefebvre, G., Rohan, K., and Douville, S. (1985). “Erosivity of natural intact structured clay: Evaluation.” Can. Geotech. J., 22(4), 508–517.
McNeil, J., Taylor, C., and Lick, W. (1996). “Measurements of erosion of undisturbed bottom sediments with depth.” J. Hydraul. Eng., 316–324.
Moody, L. F. (1944). “Friction factors for pipe flow.” Trans. ASME, 66(8), 671–684.
Moore, W. L., and Masch, F. D. (1962). “Experiments on the scour resistance of cohesive sediments.” J. Geophys. Res., 67(4), 1437–1446.
Munson, B. R., Young, D. F., Okiishi, T. H., and Huebsch, W. W. (2009). Fundamentals of fluid mechanics, Wiley, New York.
Patel, V. C., and Yoon, J. Y. (1995). “Application of turbulence models to separated flow over rough surfaces.” J. Fluid Eng., 117(2), 234–241.
Pontaza, J. P., Chen, H. C., and Reddy, J. N. (2005). “A local-analytic-based discretization procedure for the numerical solution of incompressible flows.” Int. J. Numer. Methods Fluids, 49(6), 657–699.
Roberts, J. D., Jepsen, R. A., and James, S. C. (2003). “Measurements of sediment erosion and transport with the adjustable shear stress erosion and transport flume.” J. Hydraul. Eng., 862–871.
Shan, H., and Kerenyi, K. (2014). “Scour in cohesive soils.” Proc., National Hydraulic Engineering Conf., Federal Highway Administration, Washington, DC.
Shan, H., Shen, J., Kilgore, R., and Kerenyi, K. (2015). “Scour in cohesive soils.”, U.S. Dept. of Transportation, Federal Highway Administration, Washington, DC.
Trammell, M. (2004). “Laboratory apparatus and methodology for determining water erosion rates of erodible rock and cohesive sediments.” M.S. thesis, Dept. of Civil Engineering, Univ. of Florida, Gainesville, FL.
USSD (U.S. Society on Dams). (2011). “21st century dam design—Advances and adaptations.” Proc., 31st Annual USSD Conf., U.S. Society on Dams, Denver, 1023–1032.
Wahl, T. L. (2010). “A comparison of the hole erosion test and jet erosion test.” Joint Federal Interagency Conf. on Sedimentation and Hydrologic Modeling, Advisory Committee on Water Information, Washington, DC.
Wan, C. F., and Fell, R. (2004). “Investigation of rate of erosion of soils in embankment dams.” J. Geotech. Geoenviron. Eng., 373–380.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 30, 2016
Accepted: Jan 23, 2017
Published ahead of print: Apr 10, 2017
Published online: Apr 11, 2017
Published in print: Aug 1, 2017
Discussion open until: Sep 11, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.