Unsaturated Soil Mechanics Principles to Remove and Replace Mitigation for Expansive Clays
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 142, Issue 4
Abstract
The efficacy of removal and replacement as a mitigation alternative for expansive soil is discussed in view of numerical unsaturated flow/deformation results. Observations with respect to selection of depth and replacement soil type (similar, more, or less permeable than underlying expansive clay) are presented in the context of unsaturated flow and stress/deformation principles. Comparisons are made between various remove and replace options on the basis of extent and degree of wetting (changes in soil suction) and on ground surface total and differential movements. Selection of optimal removal and replacement depth and replacement material type requires consideration of unsaturated flow principles and understanding of the role of both net normal stress and matric suction in unsaturated soil response. Complexities in the unsaturated flow process which impact the efficacy of the remove and replace method are primarily because of the highly nonlinear nature of the unsaturated soil storage function (SWCC) and hydraulic conductivity function. Further, because the unsaturated hydraulic conductivity of soils depends on the value of soil suction, placement water content of the replacement layer has significant effect on performance. The net result is that the impact of various remove and replace options is not always intuitive. The findings presented, although not encompassing of all possible removal and replacement configurations or surface flux conditions, set the stage for application of remove and replace mitigation methods based on fundamental unsaturated soil mechanics principles.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmed, A. (2009). “Evaluation of drying and wetting cycles with soil cushion to mitigate the potential of expansive soil in upper Egypt.” Electron. J. Geotech. Eng., 14(D), 1–11.
Benson, C. H., and Trast, J. M. (1995). “Hydraulic conductivity of thirteen compacted clays.” Clays Clay Miner., 43(6), 669–681.
Bharadwaj, A. (2013). “Effect of soil replacement option on surface deflections for expansive clay profiles.” Ph.D. dissertation, Arizona State Univ., Tempe, AZ.
Dye, H. (2008). “Moisture movement through expansive soil and impact on performance of residential structures.” Ph.D. dissertation, Arizona State Univ., Tempe, AZ.
Fredlund, D. G., and Morgenstern, N. R. (1977). “Stress state variables for unsaturated soils.” J. Geotech. Eng. Div., 103(5), 447–466.
Fredlund, D. G., Rahardjo, H., and Fredlund, M. (2012). Unsaturated soil mechanics in engineering practice, Wiley, New York.
Fredlund, D. G., and Xing, A. (1994). “Equations for the soil water characteristic curve.” Can. Geotech. J., 31(4), 521–532.
Holtz, W. G., and Gibbs, G. J. (1956). “Engineering properties of expansive clays.” Trans. ASCE, 121(1), 641–677.
Houston, S., Dye, H., Zapata, C, Walsh, K., and Houston, W. (2011). “Study of expansive soils and residential foundations on expansive soils in Arizona.” J. Perform. Constr. Facil., 335–346.
Houston, S., and Welfert, B. (2014). “Experiences with unsaturated flow modeling and unsaturated flow property determination for expansive clays.” Proc., 6th Int. Conf. on Unsaturated Soils, N. Khalili, A. Russell, and A. Khoshghalb, eds., Vol. 2, CRC Press, Boca Raton, FL, 1149–1154.
Leong, E. C., and Rahardjo, H., (1997). “Permeability functions for unsaturated soils.” J. Geotech. Geoenviron. Eng., 1118–1126.
Lytton, R., Aubeny, C., and Bulut, R. (2004). “Design procedures for pavements on expansive soils.”, National Technical Information Service (NTIS), Alexandria, VA.
Maud, R. R. (1960). “The compaction of sugar-belt soils at various moisture levels.” Proc., 34th Congress South African Sugar Technologist’s Association, 154–160.
Murthy, V. R., and Praveen, G. V. (2008). “Use of chemically stabilized soil as cushion material below light weight structures founded on expansive soil.” J. Mater. Civ. Eng., 392–400.
Nelson, J. D., and Miller, D. J. (1992). Expansive soils: Problems and practice in foundation and pavement engineering, Wiley, New York.
Rao, M. R., Rao, A. S., and Babu, R. D. (2007). “Arresting heave of expansive soil beds with lime-stabilized fly ash cushion.” J. Inst. Eng. (India), 87(1), 13–17.
Satyanarayana, B. (1969). “Behavior of expansive soil treated or cushioned with sand.” Proc., 2nd Int. Research and Engineering Conf. on Expansive Clay Soils, Texas A&M Univ., College Station, TX, 308–316.
Singhal, S. (2010). “Expansive soil behavior: Property measurement techniques and heave prediction methods.” Ph.D. dissertation, Arizona State Univ., Tempe, AZ.
SoilVision Systems. (2009). SVOffice user’s manual, Saskatoon, SK, Canada.
Vu, H. Q. (2002). “Uncoupled and coupled solutions of volume change problems in expansive soils.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Saskatchewan, Saskatoon, SK, Canada.
Vu, H. Q., and Fredlund, D. G. (2004). “The prediction of one, two and three dimensional heave in expansive soils.” Can. Geotech. J., 41(4), 713–737.
Walsh, K. D, Houston, S. L., Houston, W. N., and Harraz, A. M. (2009). “Finite element evaluation of deep-seated swell.” Unsaturated Soils: Theoretical and Numerical Advances in Unsaturated Soil Mechanics, O. Buzzi, S. Fityus, and D. Sheng, eds., CRC Press, Boca Raton, FL, 23–25.
Wilson, G. W., Fredlund, D. G., and Barbour, S. L. (1994). “Coupled soil atmosphere modeling for soil evaporation.” Can. Geotech. J., 31(2), 151–161.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Apr 17, 2014
Accepted: Sep 14, 2015
Published online: Dec 31, 2015
Published in print: Apr 1, 2016
Discussion open until: May 31, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.