Discussion of “Stiffness and Strength Governing the Static Liquefaction of Tailings” by F. Schnaid, J. Bedin, A. J. P. Viana da Fonseca, and L. de Moura Costa Filho
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 141, Issue 9
![First page of PDF](/cms/10.1061/(ASCE)GT.1943-5606.0001328/asset/6b77f626-ae79-4dd0-8c86-5311006cf5c7/assets/(asce)gt.1943-5606.0001328.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Tarhouni, M., Simms, P., and Sivathayalan, S. (2011). “Cyclic behavior of reconstituted and desiccated-rewet thickened gold tailings in simple shear.” Can. Geotech. J., 48(7), 1044–1060.
Been, K., and Jefferies, M. (1989). “A state parameter for sands.” Géotechnique, 35(2), 99–112.
Castro, G. (1969). “Liquefaction of sands.” Ph.D. thesis, Harvard Univ., Cambridge, MA.
Daliri, F., Kim, H., Simms, P., and Sivathayalan, S. (2014). “Impact of desiccation on monotonic and cyclic shear strength of thickened gold tailing.” J. Geotech. Geoenviron. Eng., 04014048.
Daliri, F., Simms, P., and Sivathayalan, S. (2013). “Shear behaviour of high density tailings sampled from a laboratory simulation of multi-layer deposition.” Proc., 66th Canadian Geotechnical Conf., Canadian Geotechnical Society, Montreal.
Frost, J. D., and Park, J. Y. (2003). “A critical assessment of the moist tamping technique.” Geotech. Test. J., 26(1), 57–70.
Ladd, R. S. (1978). “Preparing test specimens using under compaction.” Geotech. Test. J., 1(1), 16–23.
Pillai, V. S., and Stewart, R. A. (1994). “Evaluation of liquefaction potential of foundation soils at Duncan Dam.” Can. Geotech. J., 31(6), 951–966.
Thompson, P. R., and Wong, R. C. K. (2008). “Specimen non-uniformities in water-pluviated and moist tamped sands under undrained triaxial compression and extension.” Can. Geotech. J., 45(7), 939–956.
Vaid, Y. P., and Sivathayalan, S. (2000). “Fundamental factors affecting liquefaction susceptibility in sands.” Can. Geotech. J., 37(3), 592–606.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Sep 3, 2014
Accepted: Oct 15, 2014
Published online: May 4, 2015
Published in print: Sep 1, 2015
Discussion open until: Oct 4, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.