Three-Dimensional Analyses of Excavation Support System for the Stata Center Basement on the MIT Campus
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 141, Issue 7
Abstract
The basement of the Stata Center building on the MIT campus required 12.8 m deep excavations covering a large open-plan site and underlain by more than 25 m of lightly overconsolidated Boston Blue Clay. The excavations were supported by a floating, perimeter diaphragm and braced with a system of internal corner struts, rakers, and tieback anchors. The project involved a complex sequence of berms, access ramps, and phased construction of the concrete mat foundation. One of the key goals of the design was to limit ground movements in order to prevent damage to adjacent structures, including the Alumni Pool building, which was founded on shallow caissons and located less than 1.5 m from the south wall. Lateral wall movements and building settlements were closely monitored throughout construction, while photos from a network of webcams located around the open-plan site provide a detailed time history of the construction processes. This paper describes the development of a comprehensive three-dimensional (3D) finite-element (FE) model for the Stata Center basement excavation, which has been enabled by recent advances made available in a FE software package, including efficient multicore iterative solving capabilities, importing of geometric data from computer-aided design files, and use of embedded pile elements to represent tieback anchors. The analyses highlight the effects of the 3D excavation and support geometry on wall and ground movements. The base case results using a simple elasto-plastic Mohr–Coulomb soil model with undrained conditions in the clay are generally in very good agreement with measured performance. The effects of refined constitutive modeling and partial drainage within the clay have a secondary role in numerical predictions for this project.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The Stata Center was designed by Gehry Partners and constructed by Beacon-Skanska Construction Company. Haley and Aldrich were the geotechnical consultants responsible for site investigation, design of field instrumentation, and monitoring of the basement construction. The views and opinions expressed in this paper are those of the authors and do not represent those of the organizations or other individuals responsible for completion of the project. The authors are grateful to former MIT provost Robert Brown for supporting the original research project that enabled documentation of the project, to David Lewis who oversaw the project for the MIT Department of Facilities, and to Robert Hewitt and Rebecca Brown (H and A) for their very helpful collaboration during construction. The first author (ZYO) was supported by a Bolashak scholarship from the Republic of Kazakhstan during his Master of Science studies at MIT.
References
ABAQUS [Computer software]. Providence, RI, Dassault Systèmes.
ANSYS 6.0 [Computer software]. Canonsburg, PA, ANSYS.
Berman, D. R., Germaine, J. T., and Ladd, C. C. (1993). “Characterization of engineering properties of Boston blue clay for the MIT campus.”, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA.
Brinkgreve, R. B. J., Engin, E., and Swolfs, W. M., eds. (2012). Plaxis 3D 2011, A.A. Balkema, Rotterdam, Netherlands.
Committee of Inquiry. (2005). Report of the Committee of Inquiry into the incident at the MRT circle line worksite that led to collapse of Nicoll highway on 20th April, 2004, Ministry of Manpower, Singapore.
Corral, G. (2013). “Methodology for updating numerical predictions of excavation performance.” Sc.D. thesis, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology Cambridge, MA.
Dong, Y., Burd, H., Houlsby, G. T., and Xu, Z. (2013). “3D FEM modeling of a deep excavation case history considering small strain stiffness of soil and thermal shrinkage of concrete.” Proc., 7th Int. Conf. on Case Histories in Geotechnical Engineering, Vol. 3.28b, Missouri Univ. of Science and Technology, Rolla, MO.
Finno, R. J., Blackburn, J. T., and Roboski, J. F. (2007). “Three-dimensional effects for supported excavations in clay.” J. Geotech. Geoenviron. Eng., 30–36.
Hewitt, R. D., and Haley, M. X. (2003). “Stata Center, deep excavation meets MIT’s needs.” Structure Magazine.
Hewitt, R. D., Haley, M. X., and Kinner, E. B. (2003). “Case history of deep excavation on an urban campus.” Proc., Soil & Rock America 2003 (12th Pan-American Conf. on Soil Mechanics and Geotechnical Engineering), Glückauf, Essen, Germany.
Houlsby, G. T. (1999). “A model for the variable stiffness of undrained clay.” Proc., Int. Symp. Pre-Failure Deformations of Soil, A.A. Balkema, Rotterdam, Netherlands.
Jen, L. C. (1998). “The design and performance of deep excavations in clay.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA.
Ladd, C. C., and DeGroot, D. J. (2003). “Recommended practice for soft ground site characterization—Arthur Casagrande lecture).” Proc., Soil & Rock America 2003 (12th Pan-American Conf. on Soil Mechanics and Geotechnical Engineering), Glückauf, Essen, Germany.
Ladd, C. C., Young, G. A., Kraemer, S. R., and Burke, D. M. (1999). “Engineering properties of Boston Blue Clay from special testing program.” Proc., Special Geotechnical Testing: Central Artery/Tunnel Project in Boston, Massachusetts, ASCE GSP 91, GeoCongress ‘98, ASCE, Reston, VA, 1–24.
Lee, F. H., Hong, S. H., Gu, Q., and Zhao, P. (2011). “Application of large three-dimensional finite-element analyses to practical problems.” Int. J. Geomech., 529–539.
Lee, F. H., Yong, K. Y., Quan, K. C. N., and Chee, K. T. (1998). “Effects of corners in strutted excavations.” J. Geotech. Geoenviron. Eng., 339–349.
LS-DYNA [Computer software]. Livermore Software Technology, 〈http://www.lstc.com/download/manuals〉.
Olsen, M. B. (2001). “Measured performance of a large excavation on the MIT campus.” S.M. thesis, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA.
Ou, C. Y., Chiou, D. C., and Wu, T. S. (1996). “Three-dimensional finite element analysis of deep excavations.” J. Geotech. Eng., 337–345.
Plaxis 3D-2012 [Computer software]. Delft, Netherlands, Plaxis bv.
Sadek, M., and Shahrour, I. (2004). “A three dimensional embedded beam element for reinforced geomaterials.” Int. J. Numer. Anal. Methods Geomech., 28(9), 931–946.
Simpson, B. (1992). “Retaining structures—Displacement and design (32nd Rankine lecture).” Géotechnique, 42(4), 541–576.
Taylor, D. W. (1944). “An unusual foundation problem: The Alumni Pool building.” J. Boston Soc. Civ. Eng., 31(4), 136–146.
Ukritchon, B., Whittle, A. J., and Sloan, S. W. (2003). “Undrained stability of braced excavations in clay.” J. Geotech. Geoenviron. Eng., 738–755.
Whittle, A. J., Corral, G., Jen, L. C., and Rawnsley, R. P. (2015). “Prediction and performance of deep excavations for courthouse station, Boston.” J. Geotech. Geoenviron. Eng., 04014123.
Whittle, A. J., and Davies, R. V. (2006). “Nicoll highway collapse: Evaluation of geotechnical factors affecting design of excavation support system.” Proc., Int. Conf. on Deep Excavations, Tunneling and Underground Construction Society (TUCSS), Singapore.
Whittle, A. J., DeGroot, D. J., Ladd, C. C., and Seah, T.-H. (1994). “Model prediction of the anisotropic behavior of Boston Blue Clay.” J. Geotech. Eng., 199–224.
Whittle, A. J., and Kavvadas, M. J. (1994). “Formulation of the MIT-E3 constitutive model for overconsolidated clays.” J. Geotech. Eng., 173–198.
Yeow, H. C., Pillai, A. K., and Wallace, J. (2006). “The use of a full non-linear 3D finite element model n ground movement and risk assessment in a major infrastructure project.” Proc., ASCE GeoCongress, ASCE, Reston, VA.
Zdravkovic, L., Potts, D. M., and StJohn, H. D. (2005). “Modelling of a 3D excavation in finite element analysis.” Géotechnique, 55(7), 497–513.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 141 • Issue 7 • July 2015
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Feb 15, 2014
Accepted: Feb 27, 2015
Published online: Apr 8, 2015
Published in print: Jul 1, 2015
Discussion open until: Sep 8, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.