Deformation Behavior of Lignosulfonate-Treated Sandy Silt under Cyclic Loading
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 141, Issue 1
Abstract
Although many traditional soil stabilizers (e.g., lime, cement, gypsum, and fly ash) have been widely and effectively used for ground improvement, they often adversely affect the surrounding soil and groundwater environment. Moreover, traditionally treated soils have shown excessive brittle behavior, especially under cyclic loads, which is often undesirable for structures such as rail embankments and airport runways. To establish an alternative stabilizer that could overcome these problems, this paper presents the results of a series of cyclic triaxial tests on the use of lignosulfonate (a by-product of the timber industry), an environmentally friendly soil stabilizer effective for treating fine sandy silt that formed the bulk of the embankment fill at Penrith, Australia. The influence of lignosulfonate on the stress-strain behavior, resilient modulus, and excess pore pressure development of the treated soil is discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors appreciate the financial support provided by the Queensland Department of Transport and Main Roads; Chemstab Consulting, Pty., Ltd.; Douglas Partners; and Coffey Geotechnics through an Australian Research Council (ARC) Linkage Project. The authors express their sincere gratitude to Mr. Mohammad Abadimarand for his laboratory assistance.
References
Bargado, D. T., Anderson, L. R., Miura, N., and Balasubramaniam, A. S. (1996). Soft ground improvement in lowland and other environments, ASCE, New York.
Chen, B. (2004). “Polymer–clay nanocomposites: An overview with emphasis on interaction mechanisms.” Br. Ceram. Trans., 103(6), 241–249.
Chen, Q., Indraratna, B., Carter, J., and Rujikiatkamjorn, C. (2014). “A theoretical and experimental study on the behaviour of lignosulfonate-treated sandy silt.” Comput. Geotech., 61(Sep), 316–327.
Clough, G. W., Rad, N. S., Bachus, R. C., and Sitar, N. (1981). “Cemented sands under static loading.” J. Geotech. Engrg. Div., 107(6), 799–817.
Guo, L., Wang, J., Cai, Y., Liu, H., Gao, Y., and Sun, H. (2013). “Undrained deformation behavior of saturated soft clay under long-term cyclic loading.” Soil. Dyn. Earthquake Eng., 50(Jul), 28–37.
Horpibulsuk, S., Miura, N., and Bergado, D. T. (2004). “Undrained shear behavior of cement admixed clay at high water content.” J. Geotech. Geoenviron. Eng., 1096–1105.
Indraratna, B. (1996). “Utilization of lime, slag and fly ash for improvement of a colluvial soil in New South Wales, Australia.” Geotech. Geol. Eng., 14(3), 169–191.
Indraratna, B., Athukorala, R., and Vinod, J. (2013). “Estimating the rate of erosion of a silty sand treated with lignosulfonate.” J. Geotech. Geoenviron. Eng., 701–714.
Indraratna, B., Mahamud, M. A. A., Vinod, J. S., and Wijeyakulasuriya, V. (2010). “Stabilization of an erodible soil using a chemical admixtures.” Proc., Int. Conf. on Geological Engineering, M. Bouassida, E. Hamdi, and I. Said, eds., Univ. of Wollongong, Wollongong City, Australia, 45–54.
Indraratna, B., Muttuvel, T., Khabbaz, H., and Armstrong, R. (2008). “Predicting the erosion rate of chemically treated soil using a process simulation apparatus for internal crack erosion.” J. Geotech. Geoenviron. Eng., 837–844.
Kitchen, N. R., Sudduth, K. A., and Drummond, S. T. (1996). “Mapping of sand deposition from 1993 midwest floods with electromagnetic induction measurements.” J. Soil Water Conserv., 51(4), 336–340.
Lade, P. V., and Overton, D. D. (1989). “Cementation effects in frictional materials.” J. Geotech. Engrg., 1373–1387.
Marri, A., Wanatowski, D., and Yu, H. S. (2012). “Drained behaviour of cemented sand in high pressure triaxial compression tests.” Geomech. Geoeng. Int. J., 7(3), 159–174.
Nalbantoglu, Z., and Tuncer, E. R. (2001). “Compressibility and hydraulic conductivity of a chemically treated expansive clay.” Can. Geotech. J., 38(1), 154–160.
Ni, J. (2012). “Application of geosynthetic vertical drains under cyclic loads in stabilizing tracks.” Ph.D. thesis, Univ. of Wollongong, Wollongong City, Australia.
Puppala, A. J., and Hanchanloet, S. (1999). “Evaluation of a new chemical treatment method on strength and resilient properties of a cohesive soil.” Paper No. 990389, Transportation Research Board, Washington, DC.
Rollings, R. S., Burkes, J. P., and Rollings, M. P. (1999). “Sulfate attack on cement-stabilized sand.” J. Geotech. Geoenviron. Eng., 364–372.
Sariosseiri, F., and Muhunthan, B. (2009). “Effect of cement treatment on geotechnical properties of some Washington State soils.” Eng. Geol., 104(1–2), 119–125.
Sherwood, P. T. (1993). Soil stabilization with cement and lime: State-of the art review, Transport Research Laboratory, Her Majesty’s Stationery Office, London.
Tingle, J. S., and Santori, R. L. (2003). “Stabilization of clay soils with non-traditional additives.” Transportation Research Record 1819, Transportation Research Board, Washington, DC, 72–84.
Xiao, B., Sun, X. F., and Sun, R. (2001). “The chemical modification of lignins with succinic anhydride in aqueous systems.” Polym. Degrad. Stab., 71(2), 223–231.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 25, 2014
Accepted: Sep 2, 2014
Published online: Sep 26, 2014
Published in print: Jan 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.