Tailings Subaerial and Subaqueous Deposition and Beach Slope Modeling
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 141, Issue 1
Abstract
The tailings beach slope is a fundamental parameter for the design and operation of tailings storage facilities because it affects the tailings storage capacity, pond levels, and phreatic surfaces within the containment structures. Understanding tailings beach development is particularly important for thickened and paste tailings facilities, where the tailings can form a self-stacking structure. This paper presents a theoretical tailings deposition model that can describe the formation of tailings beach slopes in both subaerial and subaqueous deposition environments. The depositional behavior and deposition mechanisms are investigated from both geotechnical and hydraulic engineering perspectives. The model is developed to capture deposition mechanisms based on the principles of soil mechanics and fluid mechanics. The governing differential equations can be solved using a numerical technique, and the solution scheme can readily be implemented in computer languages. Case studies for subaerial deposition demonstrate that the modeling results are in agreement with laboratory flume testing and field measurements. The proposed model considers geotechnical and rheological properties of tailings, water pressures, operation parameters, and site topographic conditions. A sensitivity study was carried out to provide insight into the effects of influencing factors on the beach slope.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author thanks Professor R. K. Rowe, Queen’s University, for reviewing the approach and mathematical model, Dr. Neil Mattes, Principal Geotechnical Engineer of URS, for valuable comments, former colleagues D. Williams, K. Bocking, T. Eldridge, I. Wislesky, K. Been, D. Becker, Principals of Golder Associates, and D. Fredlund, Professor Emeritus, at the University of Saskatchewan, for valuable suggestions to the paper on the subaerial deposition during the early stage of model development.
References
Ancey, C., and Cochard, S. (2009). “The dam-break problem for Herschel–Bulkley viscoplastic fluids down steep flumes.” J. Non-Newtonian Fluid Mech., 158(1–3), 18–35.
Blight, G. E. (1998). “Tailings beaches formed in air and water.” Proc., 5th Int. Conf. on Tailings and Mine Waste '98, Balkema, Rotterdam, Netherlands, 27–34.
Blight, G. E., and Bentel, M. G. (1983). “The behaviour of mine tailings during hydraulic deposition.” J. S. Afr. Inst. Min. Metall., 83(4), 73–86.
Boger, D. (2002). “Rheological concepts.” Chapter 3, Paste and thickened tailings–A guide, R. J. Jewell, A. B. Fourie, and E. R. Lord, eds., Australian Centre for Geomechanics, Perth, WA, Australia.
Chow, V. T. (1959). Open-channel hydraulic, McGraw Hill, New York.
Cochard, S., and Ancey, C. (2009). “Experimental investigation of the spreading of viscoplastic fluids on inclined planes.” J. Non-Newtonian Fluid Mech., 158(1–3), 73–84.
Crowder, J. J. (2004). “Deposition, consolidation, and strength of a non-plastic tailings paste for surface disposal.” Ph.D. thesis, Univ. of Toronto, Toronto.
Fitton, T. G. (2007). “Tailings beach slope prediction.” Ph.D. thesis, School of Civil, Environmental and Chemical Engineering, Royal Melbourne Institute of Technology, Melbourne, VIC, Australia.
Fitton, T. G., Bhattacharya, S. N., and Chryss, A. G. (2008). “Three-dimensional modeling of tailings beach shape.” Comput.-Aided Civ. Infrastruct. Eng., 23(1), 31–44.
Fitton, T. G., Chryss, A. G., and Bhattacharya, S. N. (2006). “Tailings beach slope prediction: A new rheological method.” Int. J. Surf. Min. Reclam. Environ., 20(3), 181–202.
Fourie, A. (1988). “Beaching and permeability properties of tailings.” Proc., Specialty Conf. on Hydraulic Fill Structures, Geotechnical Special Publication 21, D. J. A. Van Zyl and S. G. Vick, eds., ASCE, Reston, VA.
Fourie, A. B., and Gawu, S. K. Y. (2010). “The validity of laboratory flume data for predicting beach slopes of thickened tailings deposits.” Proc., Paste 2010: 13th Int. Seminar on Paste and Thickened Tailings, Australian Centre for Geomechanics, Perth, WA, Australia, 241–253.
Hogg, A. J., and Matson, G. P. (2009). “Slumps of viscoplastic fluids on slopes.” J. Non-Newtonian Fluid Mech., 158(1–3), 101–112.
Jewell, R. J., and Fourie, A. B. (2006). Paste and thickened tailings—A guide, 2nd Ed., Australian Centre for Geomechanics, Perth, WA, Australia.
Jia, Y. (1990). “Minimum Froude number and the equilibrium of alluvial sand rivers.” Earth Surf. Processes Landforms, 15(3), 199–209.
Li, A. L. (2011). “Prediction of tailings beach slopes and tailings flow profiles.” Proc., Paste 2011: 14th Int. Seminar on Paste and Thickened Tailings, Australian Centre for Geomechanics, Perth, WA, Australia, 307–322.
Li, A. L., Andruchow, B., Wislesky, I., and Olson, E. (2011). “Field testing of co-disposal techniques for acid generating tailings and waste rock at Cerro de Maimón mine.” Proc., Tailings and Mine Waste ’11: 15th Int. Conf. on Tailings and Mine Waste, Norman B. Keevil Institute of Mining Engineering, Vancouver, BC, Canada.
Li, A. L., Been, K., Ritchie, D., and Welch, D. (2009). “Stability of large thickened, non-segregated tailings slopes.” Proc., Paste 2009: 12th Int. Seminar on Paste and Thickened Tailings, Australian Centre for Geomechanics, Perth, WA, Australia, 301–311.
Liu, K. F., and Mei, C. C. (1989). “Slow spreading of a sheet of Bingham fluid on an inclined plane.” J. Fluid Mech., 207(Oct), 505–529.
Masterson, S. (2006). “Sunrise Dam, Australia.” Chapter 12, Paste and thickened tailings—A guide, 2nd Ed., R. J. Jewell and A. B. Fourie, eds., Australian Centre for Geomechanics, Perth, WA, Australia.
McPhail, G. (2008). “Prediction of the beach profile of high-density thickened tailings from rheological and small-scale trial deposition data.” Proc., Paste 2008: 11th Int. Seminar on Paste and Thickened Tailings, Australian Centre for Geomechanics, Perth, WA, Australia, 179–185.
Mei, C. C., and Yuhi, M. (2001). “Slow flow of a Bingham fluid in a shallow channel of finite width.” J. Fluid Mech., 431(Mar), 135–159.
Morris, P. H., and Williams, D. J. (1996). “Prediction of mine tailings delta profiles.” Trans. Inst. Min. Metall., 105(1), A63–A68.
Obermeyer, J., and Alexieva, T. (2011). “Design, construction and operation of a large centerline tailings storage facility with high rate of rise.” Proc., Tailings and Mine Waste ’11: 15th Int. Conf. on Tailings and Mine Waste, Norman B. Keevil Institute of Mining Engineering, Vancouver, BC, Canada, 237–250.
Palmer, B., and Krizek, R. J. (1987). “Thickened slurry disposal method for process tailings.” Proc., Specialty Conf. on Geotechnical Practice for Waste Disposal, Geotechnical Special Publication 13, ASCE, Reston, VA, 728–743.
Parker, G., Paola, C., Whipple, K. X., and Mohrig, D. (1998). “Alluvial fans formed by channelized fluvial and sheet flow. I: Theory.” J. Hydraul. Div., 985–995.
Pirouz, B., Kavianpour, M. R., and Williams, P. (2005). “Thickened tailings beach deposition—Field observations and full-scale flume testing.” Proc., Paste 2005: 8th Int. Seminar on Paste and Thickened Tailings, Australian Centre for Geomechanics, Perth, WA, Australia, 53–72.
Pirouz, B., and William, M. P. A. (2007). “Prediction of non-segregating thickened tailings beach slope—A new method.” Proc., Paste 2007: 10th Int. Seminar on Paste and Thickened Tailings, Australian Centre for Geomechanics, Perth, WA, Australia, 315–327.
Robinsky, E. I. (1978) “Tailings disposal by the thickened discharge method for improved economy and environmental control.” Proc., 2nd Int. Tailings Symp., George O. Argall, Jr., ed., Miller Freeman Publications, San Francisco, 75–95.
Takahashi, T. (1991). “Debris flow.” IAHR/AIRH Monograph, Balkema, Rotterdam, Netherlands.
Whipple, K. X., Parker, G., Paola, C., and Mohrig, D. (1998). “Channel dynamics, sediment transport, and the slope of alluvial fans: Experimental study.” J. Geol., 106(6), 677–694.
Wislesky, I., and Li, A. L. (2008). “Innovative mine waste disposal in two distinctly different settings.” Proc., Tailings and Mine Waste ’08: 12th Int. Conf., CRC Press, Boca Raton, FL, 83–93.
Yuan, S., and Lahaie, R. (2010). “Paste and thickened tailings technology and its applicability in oil sand tailings management.” Proc., 13th Int. Seminar on Paste and Thickened Tailings, Australian Centre for Geomechanics, Perth, WA, Australia, 437–450.
Yuhi, M., and Mei, C. C. (2004). “Slow spreading of fluid mud over a conical surface.” J. Fluid Mech., 519(Nov), 337–358.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 141 • Issue 1 • January 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 7, 2014
Accepted: Sep 2, 2014
Published online: Oct 1, 2014
Published in print: Jan 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.