Impact of Unburned Carbon Particles on the Electrical Conductivity of Fly Ash Slurry
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 140, Issue 9
Abstract
Recent stability issues in ash ponds have highlighted the importance of estimation of in situ void ratio or water content of disposed fly ash to assess the field performance and stability of these disposal units. One standard prohibits the use of fly ash with carbon content greater than 6% in concrete, making low-cost methods of quantifying the carbon content of fly ash attractive, especially for applications that might consider mining and reuse of previously disposed fly ash. In this study, electrical conductivity/resistivity measurements were used to measure the in situ carbon content and void ratio of fly ash, with the ultimate goal of quantifying the level of unburned carbon in the material. Because unburned carbon particles are electrically conductive, the resulting media conductivity is a function of carbon content, allowing determination of the carbon content of fly ash as well as the void ratio, or water content, of the soil matrix. The authors found that the measured electrical conductivity generally increased with an increase in carbon content, and the dependency of carbon particle conduction on applied stress increased with an increase in carbon content owing to the increased number of direct contacts between electrically conductive unburned carbon particles. In addition, this study evaluated the effect of pore-water conductivity on media conductivity and carbon particle conduction.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support and ash samples were provided by Southern Company; this support is gratefully acknowledged. The authors thank Dr. Carlos Santamarina, Dr. David Frost, and Dr. Paul Mayne at Georgia Tech, and Mr. Lamar Larrimore at Southern Company for their perceptive comments.
References
AECOM. (2009). “Root cause analysis of TVA Kingston dredge pond failure on December 22, 2008. Volume I—Summary report.” Project No. 60095742, Vernon Hills, IL.
American Coal Ash Association (ACAA). (2003). Fly ash facts for highway engineers, Aurora, CO.
American Coal Ash Association (ACAA). (2011). Ash at work: Applications, science and sustainability of coal ash, Aurora, CO.
Archie, G. E. (1942). “The electrical resistivity log as an aid in determining some reservoir characteristics.” Trans. Am. Inst. Min. Metall. Eng., 146, 54–61.
ASTM. (2012). “Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete.” C618-12a, West Conshohocken, PA.
Baltrus, J. P., Wells, A. W., Fauth, D. J., Diehl, J. R., and White, C. M. (2001). “Characterization of carbon concentrates from coal-combustion fly ash.” Energy Fuels, 15(2), 455–462.
Baxter, L. (2005). “Biomass-coal co-combustion: Opportunity for affordable renewable energy.” Fuel, 84(10), 1295–1302.
Benjamin, I., Evans, D., and Nitzan, A. (1997). “Electron tunneling through water layers: Effect of layer structure and thickness.” J. Chem. Phys., 106(16), 6647–6654.
Boudreau, B. P. (1996). “The diffusive tortuosity of fine-grained unlithified sediments.” Geochim. Cosmochim. Acta, 60(16), 3139–3142.
Bouzoubaa, N., Zhang, M. H., Bilodeau, A., and Malhotra, V. M. (1997). “The effect of grinding on the physical properties of fly ashes and a Portland cement clinker.” Cement Concr. Res., 27(12), 1861–1874.
British Standards Institution (BSI). (1975). “Methods of test for soils for civil engineering purposes.” BS 1377:1975, London.
Campanella, R. G., and Weemees, I. (1990). “Development and use of an electrical resistivity cone for groundwater contamination studies.” Can. Geotech. J., 27(5), 557–567.
Chandel, S., Singh, S. N., and Seshadri, V. (2009). “Deposition characteristics of coal ash slurries at higher concentrations.” Adv. Powder Technol., 20(4), 383–389.
Choo, H. (2013). “Engineering behavior and characterization of physical-chemical particulate mixtures using geophysical measurement techniques.” Ph.D. thesis, Georgia Institute of Technology, Atlanta.
Choo, H., and Burns, S. E. (2014). “Review of Archie’s equation through theoretical derivation and experimental study on uncoated and hematite coated soils.” J. Appl. Geophys., 105(Jun), 225–234.
Dias, R., Teixeira, J. A., Mota, M., and Yelshin, A. (2006). “Tortuosity variation in a low density binary particulate bed.” Separ. Purif. Tech., 51(2), 180–184.
Fam, M., and Santamarina, J. C. (1997). “A study of consolidation using mechanical and electromagnetic waves.” Geotechnique, 47(2), 203–219.
Fernandez, A. L., and Santamarina, J. C. (2001). “Effect of cementation on the small-strain parameters of sands.” Can. Geotech. J., 38(1), 191–199.
Galperin, M., Nitzan, A., and Benjamin, I. (2002). “Numerical simulations of electron tunneling currents in water.” J. Phys. Chem. A, 106(45), 10790–10796.
Gandhi, S. R., Dey, A. K., and Selvam, S. (1999). “Densification of pond ash by blasting.” J. Geotech. Geoenviron. Eng., 889–899.
Glover, P. W. J., Gomez, J. B., Meredith, P. G., Hayashi, K., Sammonds, P. R., and Murrell, S. A. F. (1997). “Damage of saturated rocks undergoing triaxial deformation using complex electrical conductivity measurements: Experimental results.” Phys. Chem. Earth, 22(1–2), 57–61.
Holm, R. (1946). Electric contacts, H. Geben, Stockholm, Sweden.
Holm, R. (1967). Electric contacts: Theory and applications, 4th Ed., Springer, Berlin.
Horiuchi, S., Kawaguchi, M., and Yasuhara, K. (2000). “Effective use of fly ash slurry as fill material.” J. Hazard. Mater., 76(2–3), 301–337.
Hower, J. C., Rathbone, R. F., Robl, T. L., Thomas, G. A., Haeberlin, B. O., and Trimble, A. S. (1998). “Case study of the conversion of tangential- and wall-fired units to combustion: Impact on fly ash quality.” Waste Manage., 17(4), 219–229.
Hutcheson, S. M., Sendlein, L. V. A., Dinger, J. S., Currens, J. C., and Sahba, A. M. (1997). “Hydrogeology and ground-water monitoring of coal-ash disposal sites in a Karst terrane near Burnside, South-Central Kentucky.” Rep. of Investigations 11, Series XI, Kentucky Geological Survey, Lexington, KY.
Hwang, J. Y., Sun, X., and Li, Z. (2002). “Unburned carbon from fly ash for mercury adsorption: I. Separation and characterization of unburned carbon.” J. Miner. Mater. Charact. Eng., 1(1), 39–60.
Jager, K. M., McQueen, D. H., Tchmutin, I. A., Ryvkina, N. G., and Kluppel, M. (2001). “Electron transport and ac electrical properties of carbon black polymer composites.” J. Phys. D Appl. Phys., 34(17), 2699–2707.
Johnson, K. L. (1985). Contact mechanics, Cambridge University Press, Cambridge, U.K.
Kim, B., Prezzi, M., and Salgado, R. (2005). “Geotechnical properties of fly and bottom ash mixtures for use in highway embankments.” J. Geotech. Geoenviron. Eng., 914–924.
Kim, J. H., Yoon, H.-K., Cho, S.-H., Kim, Y. S., and Lee, J.-S. (2011a). “Four electrode resistivity probe for porosity evaluation.” Geotech Test. J., 34(6), 668–675.
Kim, J. H., Yoon, H.-K., and Lee, J.-S. (2011b). “Void ratio estimation of soft soils using electrical resistivity cone probe.” J. Geotech. Geoenviron. Eng., 86–93.
Klein, K. A., and Santamarina, J. C. (2003). “Electrical conductivity in soils: Underlying phenomena.” J. Environ. Eng. Geophys., 8(4), 263–273.
Koponen, A., Kataja, M., and Timonen, J. (1996). “Tortuous flow in porous media.” Phys. Rev. E: Stat. Phys. Plasmas Fluids Relat. Interdisciplin. Top., 54(1), 406–410.
Kulaots, I., Hurt, R. H., and Suuberg, E. M. (2004). “Size distribution of unburned carbon in coal fly ash and its implications.” Fuel, 83(2), 223–230.
Liu, H. Y., Tan, H. Z., Gao, Q. A., Wang, X. B., and Xu, T. M. (2010). “Microwave attenuation characteristics of unburned carbon in fly ash.” Fuel, 89(11), 3352–3357.
Marinho, B., Ghislandi, M., Tkalya, E., Koning, C. E., and de With, G. (2012). “Electrical conductivity of compacts of graphene, multi-wall carbon nanotubes, carbon black, and graphite powder.” Powder Technol., 221(May), 351–358.
Matyka, M., Khalili, A., and Koza, Z. (2008). “Tortuosity-porosity relation in porous media flow.” Phys. Rev. E: Stat. Nonlinear Soft Matter Phys., 78(2), 026306.
Mitchell, J. K., and Soga, K. (2005). Fundamentals of soil behavior, Wiley, Hoboken, NJ.
Naik, T. R., Kraus, R. N., Ramme, B. W., Chun, Y.-M., and Kumar, R. (2006). “High-carbon fly ash in manufacturing conductive CLSM and concrete.” J. Mater. Civ. Eng., 743–746.
Pandian, N. S. (2004). “Fly ash characterization with reference to geotechnical applications.” J. Indian Inst. Sci., 84(Nov–Dec), 189–216.
Pantea, D., Darmstadt, H., Kaliaguine, S., and Roy, C. (2003). “Electrical conductivity of conductive carbon blacks: Influence of surface chemistry and topology.” Appl. Surf. Sci., 217(1–4), 181–193.
Paya, J., Monzo, J., Borrachero, M. V., and Perismora, E. (1995). “Mechanical treatment of fly ashes. 1. Physico-chemical characterization of ground fly ashes.” Cement Concr. Res., 25(7), 1469–1479.
Pfannkuch, H. O. (1972). “On the correlation of electrical conductivity properties of porous systems with viscous flow transport coefficients.” Dev. Soil Sci., 2, 42–54.
R 2010 [Computer software]. Vienna, Austria, R Foundation for Statistical Computing.
Reynolds, M. J. (1997). An introduction to applied and environmental geophysics, Wiley, New York.
Ruhl, L., et al. (2009). “Survey of the potential environmental and health impacts in the immediate aftermath of the coal ash spill in Kingston, Tennessee.” Environ. Sci. Technol., 43(16), 6326–6333.
Salem, H. S., and Chilingarian, G. V. (1999). “The cementation factor of Archie’s equation for shaly sandstone reservoirs.” J. Petrol. Sci. Eng., 23(2), 83–93.
Sami, M., Annamalai, K., and Wooldridge, M. (2001). “Co-firing of coal and biomass fuel blends.” Prog. Energy Combust. Sci., 27(2), 171–214.
Samouelian, A., Cousin, I., Tabbagh, A., Bruand, A., and Richard, G. (2005). “Electrical resistivity survey in soil science: A review.” Soil Tillage Res., 83(2), 173–193.
Sanchez-Gonzalez, J., Macias-Garcia, A., Alexandre-Franco, M. F., and Gomez-Serrano, V. (2005). “Electrical conductivity of carbon blacks under compression.” Carbon, 43(4), 741–747.
Shen, L., and Chen, Z. X. (2007). “Critical review of the impact of tortuosity on diffusion.” Chem. Eng. Sci., 62(14), 3748–3755.
Slade, P. G. (1999). Electrical contacts: Principles and applications, Markel Dekker, New York.
Smoltczyk, U. (2002). Geotechnical engineering handbook: Fundamentals, Vol. 1, Wiley, Hoboken, NJ.
Styszko-Grochowiak, K., Golas, J., Jankowski, H., and Kozinski, S. (2004). “Characterization of the coal fly ash for the purpose of improvement of industrial on-line measurement of unburned carbon content.” Fuel, 83(13), 1847–1853.
Tangpagasit, J., Cheerarot, R., Jaturapitakkul, C., and Kiattikomol, K. (2005). “Packing effect and pozzolanic reaction of fly ash in mortar.” Cement Concr. Res., 35(6), 1145–1151.
Tu, W., Zand, B., Ajlouni, M. A., Butalia, T. S., and Wolfe, W. E. (2007). “The consolidation characteristics of impounded class F fly ash—A case history.” Proc., 2007 World of Coal Ash (WOCA), Center for Applied Energy Research, Univ. of Kentucky, Lexington, KY.
Yeboah, N. N. N., and Burns, S. E. (2011). “Geological disposal of energy-related waste.” KSCE J. Civ. Eng., 15(4), 697–705.
Yeboah, N. N. N., Shearer, C. R., Burns, S. E., and Kurtis, K. E. (2014). “Characterization of biomass and high carbon content coal ash for productive reuse applications.” Fuel, 116(Jan), 438–447.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 12, 2014
Accepted: May 28, 2014
Published online: Jun 24, 2014
Published in print: Sep 1, 2014
Discussion open until: Nov 24, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.