Experimental Study of Isotropic and Anisotropic Constitutive Models
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 140, Issue 8
Abstract
This paper analyzes the validity of the yield surface and flow rule of several isotropic and anisotropic constitutive models. These aspects are studied based on drained triaxial tests, with a number of different stress paths in a computer-controlled stress path cell. The Cam clay, modified Cam clay, and models are used to study the isotropic behavior, whereas the anisotropic conditions are analyzed using the Melanie, MIT-E3, and S-CLAY1 models. Both under the isotropic and anisotropic conditions, the results indicate that the surface described by the undrained effective stress path is suitable for simulating the yield and plastic potential surfaces. In terms of isotropic behavior, the model is the most suitable for predicting the yield, whereas the plastic potential function is closely simulated by the yield function of the modified Cam clay model. For the anisotropic models studied, the MIT-E3 model provides a better approximation of the anisotropic behavior of the Santa Clara clay.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the institutions that financially supported the research: Centro de Investigação em Engenharia Civil (CIEC), Coimbra, Portugal; Centro de Investigação em Ciências da Construção (CICC), Coimbra, Portugal; and Fundação para a Ciência e a Tecnologia (FCT), Lisbon, Portugal (PTDC/ECM/101875/2008).
References
Anandarajah, A., and Dafalias, Y. F. (1986). “Bounding surface plasticity. III: Application to anisotropic cohesive soils.” J. Eng. Mech., 1292–1318.
ASTM. (2000). “Standard practice for classification of soils for engineering purposes.” D2487, West Conshohocken, PA.
Atkinson, J. H., and Bransby, P. L. (1978). The mechanics of soils: An introduction to critical state soil mechanics, McGraw-Hill, London.
Banerjee, P. K., and Stipho, A. S. (1978). “Associated and non-associated constitutive relations for undrained behaviour of isotropic soft clays.” Int. J. Numer. Anal. Methods Geomech., 2(1), 35–56.
Bardet, J. P. (1995). “Scaled memory model for undrained behavior of anisotropic clays.” J. Geotech. Engrg., 755–765.
Borges, J. L. (2004). “Three-dimensional analysis of embankments on soft soils incorporating vertical drains by finite element method.” Comput. Geotech., 31(8), 665–676.
Borja, R. I., Hsieh, H. S., and Kavazanjian, E., Jr. (1990). “Double-yield-surface model. II: Implementation and verification.” J. Geotech. Engrg., 1402–1421.
Chai, J.-C., Miura, N., Zhu, H.-H., and Yudhbir. (2004). “Compression and consolidation characteristics of structured natural clay.” Can. Geotech. J., 41(6), 1250–1258.
Ganendra, D. (1993). “Finite element analysis of laterally loaded piles.” Ph.D. dissertation, Imperial College of Science, Technology, and Medicine, London.
Gens, A. (1982). “Stress-strain and strength characteristics of a low plasticity clay.” Ph.D. thesis, Univ. of London, London.
Graham, J., and Lau, S. L.-K. (1988). “Influence of stress-release disturbance, storage and reconsolidation procedures on the shear behaviour of reconstituted underwater clay.” Geotechnique, 38(2), 279–300.
Hajal, T. (1984). “Modélisation elastoplastic des sols par une loi multimécanisme: Application au calcul pressiométrique.” Thèse de Docteur-Ingénieur, Ecole Centrale de Paris, Paris (in French).
Hight, D. W., Jardine, R. J., and Gens, A. (1987). Embankments on soft clays: The behaviour of soft clays, Chapter 2, Public Works Research Center of Greece, Athens, Greece, 33–157.
Hirai, H., and Kamei, T. (1991). “A combined hardening model of anisotropically consolidated cohesive soils.” Can. Geotech. J., 28(1), 1–10.
Hsieh, H. S., Kavazanjian, E., Jr., and Borja, R. I. (1990). “Double-yield-surface Cam-clay plasticity model. I: Theory.” J. Geotech. Engrg., 1381–1401.
Jaky, J. (1948). “Pressure in silos.” Proc., 2nd Int. Conf. on Soil Mechanics and Foundation Engineering, Vol. 1, 103–107.
Jamiolkowski, M., Ladd, C. C., Germaine, J. T., and Lancellotta, R. (1985). “New developments in field and laboratory testing of soils.” Proc., 11th Int. Conf. on Soil Mechanics and Foundation Engineering, Vol. 1, 57–153.
Karstunen, M., Krenn, H., Wheeler, S. J., Koskinen, M., and Zentar, R. (2005). “Effect of anisotropy and destructuration on the behavior of Murro test embankment.” Int. J. Geomech., 87–97.
Karstunen, M., Wiltafsky, C., Krenn, H., Scharinger, F., and Schweiger, H. F. (2006). “Modelling the behaviour of an embankment on soft clay with different constitutive models.” Int. J. Numer. Anal. Methods Geomech., 30(10), 953–982.
Liu, M. D., and Carter, J. P. (2002). “A structured Cam clay model.” Can. Geotech. J., 39(6), 1313–1332.
Magnan, J. P. (1986). Modélisation numérique du comportement des argiles molles naturelles, Vol. 141, Rapport de Recherche Laboratoire Central des Ponts et Chaussées, Paris (in French).
Mouratidis, A., and Magnan, J. P. (1983). Modèle élastoplastique anisotrope avec écrouissage pour le calcul des ouvrages sur sols compressibles, Vol. 121, Rapport de Recherche Laboratoire Central des Ponts et Chaussées, Paris (in French).
Pietruszczak, S., and Mróz, Z. (1983). “On hardening anisotropy of - consolidated clays.” Int. J. Numer. Anal. Methods Geomech., 7(1), 19–38.
Roscoe, K. H., and Burland, J. B. (1968). “On the generalized stress-strain behavior of ‘wet' clay.” Engineering plasticity, J. Heyman and F. A. Leckie, eds., Cambridge University Press, Cambridge, U.K.
Roscoe, K. H., Schofield, A. N., and Wroth, C. P. (1958). “On the yielding of soils.” Geotechnique, 8(1), 22–53.
Suebsuk, J., Horpibulsuk, S., and Liu, M. D. (2010). “Modified structured Cam clay: A generalised critical state model for destructured, naturally structured and artificially structured clays.” Comput. Geotech., 37(7–8), 956–968.
Venda Oliveira, P. J. (2000). “Embankments on soft clays: Numeric analysis.” Ph.D. dissertation, Univ. of Coimbra, Coimbra, Portugal (in Portuguese).
Venda Oliveira, P. J., and Lemos, L. J. L. (2011). “Numerical predictions of the behaviour of soft clay with two anisotropic elastoplastic models.” Comput. Geotech., 38(5), 598–611.
Wheeler, S. J., Cudny, M., Neher, H. P., and Wiltafsky, C. (2003a). “Some developments in constitutive modelling of soft clays.” Proc., Int. Workshop on Geotechnics of Soft Soils: Theory and Practice, P. A. Vermeer, H. F. Schweiger, M. Karstunen, and M. Cudny, eds., Noordwijkerhout, Netherlands, 3–22.
Wheeler, S. J., Näätänen, A., Karstunen, M., and Lojander, M. (2003b). “An anisotropic elastoplastic model for soft clays.” Can. Geotech. J., 40(2), 403–418.
Whittle, A. J. (1993). “Evaluation of a constitutive model for overconsolidated clays.” Geotechnique, 43(2), 289–313.
Whittle, A. J., and Kavvadas, M. J. (1994). “Formulation of MIT-E3 constitutive model for overconsolidated clays.” J. Geotech. Engrg., 173–198.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 16, 2012
Accepted: Apr 11, 2014
Published online: May 14, 2014
Published in print: Aug 1, 2014
Discussion open until: Oct 14, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.