One-Way Cyclic Triaxial Behavior of Saturated Clay: Comparison between Constant and Variable Confining Pressure
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 139, Issue 5
Abstract
The one-way cyclic triaxial test has been recognized as a useful tool for solving many engineering problems, such as the prediction of deformation in subsoils under traffic loading. Most studies of the one-way cyclic behavior of soils are performed in triaxial tests with constant confining pressure (CCP), which can apply cyclic compressive deviatoric stress only. However, the real stress field in subsoils under traffic loading includes varying normal stresses in three directions. Therefore, it is more desirable to simulate the in situ loading conditions induced by passing vehicles through a combination of the varying deviatoric stress and varying confining pressure. Recognizing this, two series of one-way cyclic triaxial tests on remolded saturated clay were conducted in this study; one in undrained conditions and the other in partially drained conditions. In each series, both tests with the CCP and variable confining pressure (VCP) were carried out. Comparisons between the results of the VCP and CCP tests show that the VCP plays an important role in the one-way cyclic behavior of saturated clay, in terms of excess pore-water pressure, permanent volumetric strain, and permanent axial strain. Specifically, in partially drained conditions VCP tests deliver much larger permanent axial strain than CCP tests, indicating that the conventional CCP tests may underestimate the settlement of subsoils induced by traffic loading.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work presented in this paper was supported by the National Outstanding Youth Science Foundation of China under Grant No. 51025827; National Natural Science Foundation of China under Grant Nos. 50979096, 50808145, and 51109164; the 973 Program under Grant No. 2011CB411907; the Provincial Nature Science Foundation of Zhejiang under Grant Nos. Y1090105 and Y1110751; and the Provincial Science and Technology Projects of Zhejiang under Grant No. 2010C33182. This financial support is gratefully acknowledged.
References
Asaoka, A., Nakano, M., and Matsuo, M. (1992). “Prediction of the partially drained behavior of soft clays under embankment loading.” Soils Found., 32(1), 41–58.
Brown, S. F., and Hyde, A. F. L. (1975). “Significance of cyclic confining stress in repeated-load triaxial testing of granular material.” Transportation Research Record 537, Transportation Research Board, Washington, DC, 49–58.
Chai, J. C., and Miura, N. (2002). “Traffic-load-induced permanent deformation of road on soft subsoil.” J. Geotech. Geoenviron. Eng., 128(11), 907–916.
Chazallon, C., Hornych, P., and Mouhoubi, S. (2006). “Elastoplastic model for the long-term behavior modeling of unbound granular materials in flexible pavements.” Int. J. Geomech., 6(4), 279–289.
Hyodo, M., and Yasuhara, K. (1988). “Analytical procedure for evaluating pore water pressure and deformation of saturated clay ground subjected to traffic loads.” Proc., 6th Int. Conf. on Numerical Methods in Geomechanics, Vol. 2, A.A. Balkema, Rotterdam, Netherlands, 653–658.
Hyodo, M., Yasuhara, K., and Hirao, K. (1992). “Prediction of clay behavior in undrained and partially drained cyclic triaxial tests.” Soils Found., 32(4), 117–127.
Hyde, A. F. L., and Brown, S. F. (1976). “The plastic deformation of a silty clay under creep and repeated loading.” Geotechnique, 26(1), 173–184.
Hyde, A. F. L., and Ward, S. J. (1985). “A pore pressure and stability model for a silty clay under repeated loading.” Geotechnique, 35(2), 113–125.
Hyde, A. F. L., Yasuhara, K., and Hirao, K. (1993). “Stability criteria for marine clay under one-way cyclic loading.” J. Geotech. Eng., 119(11), 1771–1789.
Lekarp, F., Isacsson, U., and Dawson, A. (2000). “State of the art. I: Resilient response of unbound aggregates.” J. Transp. Eng., 126(1), 66–75.
Monismith, C. L., Ogawa, N., and Freeme, C. R. (1975). “Permanent deformation characteristics of subsoil due to repeated loading.” Transportation Research Record 537, Transportation Research Board, Washington, DC, 1–17.
Moses, G. G., and Rao, S. N. (2003). “Degradation in cemented marine clay subjected to cyclic compressive loading.” Mar. Georesour. Geotechnol., 21(1), 37–62.
Nataatmadja, A., and Parkin, A. K. (1989). “Characterization of granular materials for pavements.” Can. Geotech. J., 26(4), 725–730.
Rondon, H. A., Wichtmann, T., Triantafyllidis, T., and Lizcano, A. (2009). “Comparison of cyclic triaxial behavior of unbound granular material under constant and variable confining pressure.” J. Transp. Eng., 135(7), 467–478.
Sakai, A., Samang, L., and Miura, N. (2003). “Partially-drained cyclic behavior and its application to the settlement of a low embankment road on silty-clay.” Soils Found., 43(1), 33–46.
Sekiguchi, H., Nishida, Y., and Kanai, F. (1981). “Analysis of partially-drained triaxial testing of clay.” Soils Found., 21(3), 53–66.
Simonsen, E., and Isacsson, U. (2001). “Soil behavior during freezing and thawing using variable and constant confining pressure triaxial tests.” Can. Geotech. J., 38(4), 863–875.
Skempton, A. W. (1954). “The pore pressure coefficients A and B.” Geotechnique, 4(4), 143–147.
Wichtmann, T., Niemunis, A., and Triantafyllidis, Th. (2007). “On the influence of the polarization and the shape of the strain loop on strain accumulation in sand under high-cyclic loading.” Soil Dyn. Earthquake Eng., 27(1), 14–28.
Zaman, M., Chen, D., and Laguros, J. (1994). “Resilient moduli of granular materials.” J. Transp. Eng., 120(6), 967–988.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 16, 2011
Accepted: Jul 11, 2012
Published online: Aug 1, 2012
Published in print: May 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.