Method for Estimating System Stiffness for Excavation Support Walls
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 138, Issue 9
Abstract
Excessive excavation-induced movements are major concerns for most underground construction projects in urban areas. These movements can lead to significant damage in adjacent structures. When average to good workmanship is employed during the installation process of the excavation support systems, the consequent ground movements are most influenced by the support system stiffness. Therefore, choosing the most appropriate stiffness for an excavation support system is crucial to minimizing excavation-related damage to adjacent buildings and utilities. This paper presents a semiempirical design methodology that facilitates the selecting of the excavation support system stiffness in such a way that limits excavation-related ground movement. As part of the proposed design methodology, a new parameter was developed called the relative stiffness ratio. This new parameter relates the strength and stiffness of the soil with the stiffness of the excavation support system and was developed from a comprehensive parametric analysis that incorporated a fully three-dimensional finite-element analysis of a generalized excavation that realistically modeled the excavation geometry, excavation support system configuration, and excavation activities. The performance of the proposed methodology was evaluated using several excavation case histories reported worldwide. The results of the evaluation show that the new relative stiffness ratio performed well in predicting the support system bending stiffness and the actual excavation-induced lateral deformations of the case history support systems.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The material presented in this paper is based on work supported by the National Science Foundation under Grant No. CMS 06-50911 under program director Dr. R. Fragaszy. This support is gratefully appreciated.
References
Arai, Y., Kusakabe, O., Murata, O., and Konishi, S. (2008). “A numerical study on ground displacement and stress during and after the installation of deep circular diaphragm walls and soil excavation.” Comput. Geotech., 35(5), 791–807.
Baker, C. N.,Jr., Bucher, S. A., and Baker, W. F.,Jr. (1989). “Complex high-rise foundation design and construction.” Proc., Foundation Engineering: Current Principles and Practices, ASCE, New York, 1445–1458.
Blackburn, J. T., and Finno, R. J. (2007). “Three-dimensional responses observed in an internally braced excavation in soft clay.” J. Geotech. Geoenviron. Eng., 133(11), 1364–1373.
Bryson, L. S., and Medina, D. G. (2010). “Finite element analyses of secant pile wall installation.” Proc. Inst. Civ. Eng., Geotech. Eng., 163(4), 209–219.
Bryson, L. S., and Zapata-Medina, D. G. (2007). “Physical modeling of support excavation.” Proc., Sessions of Geo-Denver, ASCE, Reston, VA.
Burland, J. B., and Hancock, R. J. R. (1977). “Underground car park at the House of Commons: Geotechnical aspects.” Struct. Eng., 55(2), 87–105.
Clough, G. W., and Denby, G. M. (1977). “Stabilizing berm design for temporary walls in clay.” J. Geotech. Engrg. Div., 103(2), 75–90.
Clough, G. W., and O’Rourke, T. D. (1990). “Construction induced movements of in situ walls.” Proc., Specialty Conf. on Design and Performance of Earth Retaining Structures, ASCE, New York, 439–470.
Clough, G. W., Smith, E. M., and Sweeney, B. P. (1989). “Movement control of excavation support systems by iterative design.” Proc., Foundation Engineering Congress on Current Principles and Practices, Vol. 2, ASCE, New York, 869–884.
Faheem, H., Fei, C., and Keizo, U. (2004). “Three-dimensional base stability of rectangular excavations in soft soils using FEM.” Comput. Geotech., 31(2), 67–74.
Fang, H.-Y. (1991). Foundation engineering handbook, 2nd Ed., Van Nostrand Reinhold, New York.
Finno, R. J., Atmatzidis, D. K., and Perkins, S. B. (1989). “Observed performance of a deep excavation in clay.” J. Geotech. Eng., 115(8), 1045–1064.
Finno, R. J., Blackburn, J. T., and Roboski, J. F. (2007). “Three-dimensional effects for supported excavations in clay.” J. Geotech. Geoenviron. Eng., 133(1), 30–36.
Finno, R. J., Bryson, L. S., and Calvello, M. (2002). “Performance of a stiff excavation support system in soft clay.” J. Geotech. Geoenviron. Eng., 128(8), 660–671.
Finno, R. J., and Roboski, J. F. (2005). “Three-dimensional responses of a tied-back excavation through clay.” J. Geotech. Geoenviron. Eng., 131(3), 273–282.
Gill, S. A., and Lucas, R. G. (1990). ‘‘Ground movement adjacent to braced cuts.’’ Proc., ASCE Conf. on Design and Performance of Earth Retaining Structures, Geotechnical Special Publication No. 25, ASCE, New York, 471–488.
Hou, Y. M., Wang, J. H., and Zhang, L. L. (2009). “Finite-element modeling of a complex deep excavation in Shanghai.” Acta Geotech., 4(1), 7–16.
Hsieh, P.-G., and Ou, C.-Y. (1998). “Shape of ground surface settlement profiles caused by excavation.” Can. Geotech. J., 35(6), 1004–1017.
Hsiung, B.-C. B. (2002). “Engineering performance of deep excavations in Taipei.” Ph.D. thesis, Univ. of Bristol, Bristol, U.K.
Kort, D. A. (2002). “Steel sheet pile walls in soft soil.” Ph.D. thesis, Delft Univ. of Technology, Delft, Netherlands.
Koutsoftas, D. C. (1999). “Excavations in Sand Francisco bay mud: Design for deformation control.” Proc., Geo-Engineering for Underground Facilities, ASCE, Reston, VA.
Kung, G. T. C., Hsiao, E. C. L., and Juang, C. H. (2007). “Evaluation of a simplified small-strain soil model for analysis of excavation-induced movements.” Can. Geotech. J., 44(6), 726–736.
Liao, H. J., and Hsieh, P. G. (2002). “Tied-back excavations in alluvial soil of Taipei.” J. Geotech. Geoenviron. Eng., 128(5), 435–441.
Lin, D. G., Chung, T. C., and Phien-Wej, N. (2003). “Quantitative evaluation of corner effect on deformation behavior of multi-strutted deep excavation in Bangkok subsoil.” Geotech. Eng., 34(1), 41–57.
Long, M. (2001). “Database for retaining wall and ground movements due to deep excavations.” J. Geotech. Geoenviron. Eng., 127(3), 203–224.
Miyoshi, M. (1977). “Mechanical behavior of temporary braced wall.” Proc., 9th Int. Conf. on Soil Mechanics and Foundation Engineering, Vol. 2, No. 2, Japanese Society of SMFE, Tokyo, Japan, 655–658.
Moormann, C. (2004). “Analysis of wall and ground movements due to deep excavations in soft soil based on a new worldwide database.” J. Jpn. Geotech. Soc. Soils Found., 44(1), 87–98.
Muir Wood, D. (2004). Geotechnical modelling, Spon, London.
Ng, C. W. W. (1992). “An evaluation of soil-structure interaction associated with a multi-propped excavation.” Ph.D. thesis, Univ. of Bristol, Bristol, U.K.
Ng, C. W. W., and Yan, R. W. M. (1998). “Stress transfer and deformation mechanisms around a diaphragm wall panel.” J. Geotech. Geoenviron. Eng., 124(7), 638–648.
Norwegian Geotechnical Institute (NGI). (1962a). “Measurements at a strutted excavation, Oslo subway, Vaterland 1.” Technical Rep. 6, NGI, Oslo, Norway.
Norwegian Geotechnical Institute (NGI). (1962b). “Measurements at a strutted excavation, Oslo subway, Vaterland 3.” Technical Rep. 8, NGI, Oslo, Norway.
O’Rourke, T. D. (1981). “Ground movements caused by braced excavation.” J. Geotech. Eng., 107(9), 1159–1178.
Ou, C. Y., Hsieh, P. G., and Chiou, D. C. (1993). “Characteristics of ground surface settlement during excavation.” Can. Geotech. J., 30(5), 758–767.
Ou, C. Y., Liao, J. T., and Lin, H. D. (1998). “Performance of diaphragm wall constructed using top-down method.” J. Geotech. Geoenviron. Eng., 124(9), 798–808.
Ou, C. Y., and Shiau, B. Y. (1998). “Analysis of the corner effect on excavation behaviors.” Can. Geotech. J., 35(3), 532–540.
Ou, C. Y., Shiau, B. Y., and Wang, I. W. (2000). “Three-dimensional deformation behavior of the Taipei National Enterprise Center (TNEC) excavation case history.” Can. Geotech. J., 37(2), 438–448.
Peck, R. B. (1969). “Deep excavations and tunneling in soft ground.” Proc., 7th Int. Conf. on Soil Mechanics and Foundation Engineering, Sociedad Mexicana de Mecanica de Suelos, Mexico City, Mexico, 225–290.
Roboski, J. F., and Finno, R. J. (2006). “Distributions of ground movements parallel to deep excavations in clay.” Can. Geotech. J., 43(1), 43–58.
Schanz, T., Vermeer, P. A., and Bonnier, P. G. (1999). “The hardening soil model: Formulation and verification.” Beyond 2000 in computational geotechnics —10 years of PLAXIS, Balkema, Rotterdam, Netherlands.
Teparaksa, W. (1993). “Behavior of deep excavations using sheet pile bracing system in soft Bangkok clay.” Proc., 3rd Int. Conf. on Case Histories in Geotechnical Engineering, University of Missouri-Rolla, Rolla, MO, 745–750.
Terzaghi, K. (1943). Theoretical soil mechanics, Wiley, New York.
Ukritchon, B., Whittle, A. J., and Sloan, S. W. (2003). “Undrained stability of braced excavations in clay.” J. Geotech. Geoenviron. Eng., 129(8), 738–755.
Ulrich, E. J., Jr. (1989). “Tieback supported cuts in overconsolidated soils.” J. Geotech. Engrg., 115(4), 521–545.
Zdravkovic, L., Potts, D. M., and St John, H. D. (2005). “Modeling of a 3D excavation in finite element analysis.” Geotechnique, 55(7), 497–513.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Feb 14, 2011
Accepted: Dec 7, 2011
Published online: Dec 8, 2011
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.