Sand Deformation around an Uplift Plate Anchor
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 138, Issue 6
Abstract
This paper presents an experimental investigation on soil deformation around uplift plate anchors in sand by using digital image correlation (DIC). The experimental setup consists of a camera, loading frame, plexiglass mold, and computer, which is developed to capture soil deformation during anchor uplifting. A series of model tests are performed to investigate the influence of particle size, soil density, and anchor embedment depth on soil deformation. A set of images captured during anchor uplifting are used to calculate soil displacement fields by DIC. The failure surface is studied by tracking the points with maximum shear strain values. On the basis of this study, it is found that soil deformation and the pullout resistance of plate anchors are substantially influenced by soil density and anchor embedment depth, whereas particle size within the studied range has limited influence. In dense sand, the shape of the failure surface changes from a truncated cone above a shallow anchor to a combined shape of a curved cone and a truncated cone for a deep anchor. In contrast, in loose sand a cone-shaped failure surface is formed within the soil mass above a shallow anchor; however, no failure surface is observed for a deep anchor, where the compressibility of soil is the dominating factor that influences the behavior of deep plate anchors in loose sand.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support of a seed fund awarded to the first author by Ryerson Univ. and a Discovery Grant No. 355425 from the Natural Sciences and Engineering Research Council of Canada. The authors also want to thank the China Scholarship Council for the scholarship awarded to the second author during his one-year study at Ryerson Univ. The constructive comments and suggestions from two reviewers and Dr. Xingnian Chen, Dr. Wanghua Sui, and Ms. Hongmei Gao, and editorial help from Ms. Monica Rivera, are greatly appreciated.
References
ASTM. (2007). “Standard test methods for laboratory compaction characteristics of soil using standard effort [12,400 ft- (600 kN-)].” D698-07, West Conshohocken, PA.
ASTM. (2011). “Standard test method for direct shear test of soils under consolidated drained conditions.” D3080-11, West Conshohocken, PA.
Baker, W. H., and Kondner, R. L. (1966). “Pullout load capacity of a circular earth anchor buried in sand.” Highway Res. Rec., (108), 1–10.
Balla, A. (1961). “The resistance to breaking out of mushroom foundations for pylons.” Proc. of the 5th Int. Conf. on Soil Mechanics and Foundation Eng., Paris, France, 569–576.
Cheuk, C. Y., White, D. J., and Bolton, M. D. (2008). “Uplift mechanisms of pipes buried in sand.” J. Geotech. Geoenviron. Eng.JGGEFK, 134(2), 154–163.
Dickin, E. A., and Laman, M. (2007). “Uplift response of strip anchors in cohesionless soil.” Adv. Eng. SoftwareAESODT, 38(8–9), 618–625.
Frydman, S., and Shaham, I. (1989). “Pullout capacity of slab anchors in sand.” Can. Geotech. J.CGJOAH, 26 (3), 385–400.
Giffels, W. C., Graham, R. E., and Mook, J. F. (1960). “Concrete cylinder anchors proved for 345-KV tower line.” Electrical WorldAUEWAO, 154, 46–49.
Gudehus, G., and Nubel, K. (2004). “Evolution of shear bands in sand.” GeotechniqueGTNQA8, 54(3), 187–201.
Guler, M., Edil, T. B., and Bosscher, P. J. (1999). “Measurement of particle movement in granular soils using image analysis.” J. Comput. Civ. Eng.JCCEE5, 13(2), 116–122.
Horii, H., Takamatsu, K., Inoue, J., and Sasaki, N. (1998). “Measurement of displacement field by “Matching Method” and observation of strain localization in soft rock.” Proc., 2nd Int. Conf. on Imaging Technologies: Techniques and Applications in Civil Engineering, J. D. Frost and S. McNeil, eds., New York, 10–19.
Ilamparuthi, K., Dickin, E. A., and Muthukrisnaiah, K. (2002). “Experimental investigation of the uplift behaviour of circular plate anchors embedded in sand.” Can. Geotech. J.CGJOAH, 39(3), 648–664.
Ireland, H. O. (1963). “Discussion on uplift resistance of transmission tower footings by E. A. Turner.” J. Power Div.JPWEAM, 89(P01), 115–118.
Liu, J., and Iskander, M. (2003). “Adaptive cross correlation for imaging displacement in soils.” J. Comput. Civ. Eng., 18(1), 46–57.
Majer, J. (1955). “Zur berechnung von zugfundamenten.” Osterreichister Bauzeitschift, 10(5), 85–90 (in German).
Meyerhof, G. G., and Adams, J. I. (1968). “The ultimate uplift capacity of foundations.” Can. Geotech. J.CGJOAH, 5(4), 225–244.
Mitsch, M. P, and Clemence, S. P. (1985). “The uplift capacity of helix anchors in sand.” Proc., Conf. Uplift Behavior of Anchor Foundations in Soil, Geotech. Engrg. Div., ASCE, New York, 26–47.
Mors, H. (1959). “Das Verhalten von Mastgruendungen bei Zugbeanspruchung.” Bautechnik, 36(10), 367–378 (in German).
Murray, E. J., and Geddes, J. D. (1987). “Uplift of anchor plates in sand.” J. Geotech. Eng.JGENDZ, 113(3), 202–215.
PIVTEC. (2006). “PIVview user manual, Ver. 2.4.” 〈http://www.pivtec.com/〉 (Mar. 22, 2012).
Raffel, M., Willert, C., Wereley, S. T., and Kompenhans, J. (2007). Particle image velocimetry: A practical guide, Springer, Heidelberg, Germany.
Roscoe, K., Arthur, J., and James, R. (1963). “The determination of strains in soils by an X-ray method.” Civ. Eng. Public Works Rev.CVEGA5, 58, 873–876, 1009–1012.
Rowe, R. K., and Davis, E. H. (1982). “The behaviour of anchor plates in sand.” GeotechniqueGTNQA8, 32(1), 25–41.
Sakai, T., and Tanaka, T. (2007). “Experimental and numerical study of uplift behavior of shallow circular anchor in two-layered sand.” J. Geotech. Geoenviron. Eng.JGGEFK, 133(4), 469–477.
Scarano, F., and Riethmuller, M. L. (1999). “Iterative multigrid approach in PIV image processing with discrete window offset.” Exp. FluidsEXFLDU, 26(6), 513–523.
Sutherland, H. B. (1988). “Uplift resistance of soils.” GeotechniqueGTNQA8, 38(4), 493–516.
Tucker, K. D. (1987). “Uplift capacity of drilled shafts and driven piles in granular materials.” Proc., Conf. Foundations for Transmission Line Towers (GSP 8), Geotech. Eng. Div., ASCE, New York, 142–159.
Vesic, A. S. (1971). “Breakout resistance of objects embedded in ocean bottom.” J. Soil Mech. and Found. Div., 97(9), 1183–1205.
White, D. J., Take, W. A., and Bolton, M. D. (2003). “Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry.” GeotechniqueGTNQA8, 53(7), 619–631.
Yamamoto, K. and Kusuda, K. (2001). “Failure mechanism and bearing capacities of reinforced foundations.” Geotext. Geomembr., 19(3), 127–162.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Sep 24, 2009
Accepted: Sep 7, 2011
Published online: Sep 9, 2011
Published in print: Jun 1, 2012
Published ahead of production: Jun 15, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.