Pilot-Scale Application of Attapulgitic Clay for Stabilization of Toxic Elements in Contaminated Soil
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 138, Issue 5
Abstract
This study presents an in situ pilot-scale application of attapulgitic clay for stabilization of toxic metals and metalloids in contaminated soil. The selected field for the pilot-scale experiment was heavily contaminated with toxic metals and metalloids in total (Cu: , Pb: , Zn: , Cd: , Ag: , As: , Mn: , Ba: , Sb: ) and leachable concentrations. Geochemical and physical properties of treated soil were thoroughly studied before and after mixing with the attapulgitic clay. Soil mineralogy was determined by X-ray diffraction (XRD) and scanning electron microsope (SEM) techniques. On the basis of the site-specific soil geochemical properties, an appropriate proportion of specific grain-size attapulgitic clay was added and mixed in situ with simultaneous adjustment of soil moisture content to reach saturation. Analytical data of amended soil samples collected 1 month after the application showed a significant reduction of water leachable metal fraction (Cu: 17%, Pb: 50%, Zn: 45%, Cd: 41%, Ag: 46%, As: 18%, Mn: 47%, Ba: 45%, Sb: 29%). In addition, soil pH was stabilized at slightly alkaline conditions and remained constant during a 7-month monitoring period after amending the soil. Overall, the use of attapulgitic clay as a binder for immobilizing metals in contaminated land is a promising stabilization method at a competitive cost under present market conditions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Álvarez-Ayuso, E., and García-Sánchez, A. (2003). “Palygorskite as a feasible amendment to stabilize heavy metal polluted soils.” Environ. Pollut.ENPOEK, 125(3), 337–344.
ASTM. (1998). “Standard test method for laboratory determination of water (moisture) content of soil and rock by mass.” ASTM D2216-98, West Conshohocken, PA.
ASTM. (2001). “Standard test method for measuring bulk density values of powders and other bulk solids as function of compressive stress.” ASTM D6683-01, West Conshohocken, PA.
ASTM. (2002). “Standard test method for particle-size analysis of soils.” ASTM D422-63, West Conshohocken, PA.
ASTM. (2005). “Standard test methods for liquid limit, plastic limit, and plasticity index of soils.” ASTM D4318-05, West Conshohocken, PA.
ASTM. (2006). “Standard test method for sieve analysis of fine and coarse aggregates.” ASTM C136-06, West Conshohocken, PA.
Cai, Y. F., and Xue, J. Y. (2008). “A study of adsorption and absorption mechanisms of copper in palygorskite.” Clay Miner.CLMIAF, 43(2), 195–203.
Demetriades, A. (2010). “Medical geology in Hellas: The Lavrion environmental pollution study.” Medical geology: A regional synthesis, Selinus, O., et al., eds., Springer, Dordrecht, Netherlands, 355–390.
Diaz, M., Cambier, P., Brendlé, J., and Prost, R. (2007). “Functionalized clay heterostructures for reducing cadmium and lead uptake by plants in contaminated soils.” Appl. Clay Sci.ACLSER, 37(1–2), 12–22.
European Union. (2002). Establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC, Council Decision 2003/33/EC, Official Journal of the European Union, L11/27–49, Brussels.
Galan, E. (1996). “Properties and applications of palygorskite-sepiolite clays.” Clay Miner.CLMIAF, 31(4), 443–453.
Gionis, V., Kacandes, G. H., Kastritis, I. D., and Chryssikos, G. D. (2006). “On the structure of palygorskite by mid- and near-infrared spectroscopy.” Am. Mineral.AMMIAY, 91(7), 1125–1133.
Kastritis, I. D., Mposkos, E., and Kacandes, G. H. (2003). “The palygorskite and Mg-Fe smectite clay deposits of the Ventzia basin, Western Macedonia, Greece.” Mineral Exploration and Sustainable Development, Proc., 7th SGA Meeting, Eliopoulos, D., et al. eds., Millpress, Rotterdam, Netherlands, 891–894.
Marinos, G. P., and Petrascheck, W. E. (1956). “Lavrium.” Geological and geophysical research 4:1, Institute for Geology and Subsurface Research, Athens (in Greek with English summary).
Ministry of Housing, Spatial Planning and Environment (VROM). (2009). “Soil remediation circular 2009.” Directorate General For Environmental Protection, Netherlands.
O’Day, P. A., and Vlassopoulos, D. (2010). “Mineral-based amendments for remediation.” ElementsELMEET, 6(6), 375–381.
Potgieter, J. H., Potgieter-Vermaak, S. S., and Kalibantonga, P. D. (2006). “Heavy metals removal from solution by palygorskite clay.” Miner. Eng.MENGEB, 19(5), 463–470.
Shirvani, M., Kalbasi, M., Shariatmadari, H., Nourbakhsh, F., and Najafi, B. (2006a). “Sorption-desorption of cadmium in aqueous palygorskite, sepiolite, and calcite suspensions: Isotherm hysteresis.” ChemosphereCMSHAF, 65(11), 2178–2184.
Shirvani, M., Shariatmadari, H., Kalbasi, M., Nourbakhsh, F., and Najafi, B. (2006b). “Sorption of cadmium on palygorskite, sepiolite and calcite: Equilibria and organic ligand affected kinetics.” Colloids Surf. ACPEAEH, 287(1–3), 182–190.
U.S. EPA. (2003). “Guidance on the use of stabilisation/solidification for the treatment of contaminated soil.” R&D Technical Rep. P5-064/TR/1, Washington, DC.
Veli, S., and Alyüz, B. (2007). “Adsorption of copper and zinc from aqueous solutions by using natural clay.” J. Hazard. Mater.JHMAD9, 149(1), 226–233.
Zhen, L., Lin, Y., and Kun, H. (2006). “Iron-rich palygorskite: A potential clay material for contaminated environment remediation.” Chin. J. Geochem.CJGEEV, 25(Suppl. 1), 109–110.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jan 28, 2011
Accepted: Aug 16, 2011
Published online: Aug 18, 2011
Published in print: May 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.