Moisture Retention Properties of Municipal Solid Waste in Relation to Compression
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 138, Issue 4
Abstract
Original laboratory setups are used to study the moisture retention properties of municipal solid waste taking into account the porous medium’s structural evolution from compression. A controlled suction oedometer allowed the moisture retention curves (MRCs) of compacted samples to be determined for both wetting and drainage with a matric suction range of 0 to 10 kPa. Another setup utilizing an extraction plate was used to determine a drainage MRC for a noncompacted sample with matric suction varying from 0 to 450 kPa. The experimental results demonstrated the complexity of municipal solid waste (MSW) porous medium compared to soil. The MRC of lightly and uncompacted samples did not exhibit a measurable air-entry suction. Moreover, significant hysteresis between the wetting and drainage MRCs was observed. The experimental MRCs were interpreted with two different models, and a pore size distribution evolution with compression was proposed. Finally, the concept of field capacity in relation to the moisture retention properties is discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the French Environment and Energy Management Agency (Ademe) and Veolia Environnement Recherche et Innovation. It has received initial support from IMFT (Toulouse) and MSU (East Lansing). The writers are also grateful to LGCIE of Lyon INSA for providing complementary data related to waste.
References
Beaven, R. P., Cox, S. E., and Powrie, W. (2007). “Operation and performance of horizontal wells for leachate control in a waste landfill.” J. Geotech. Geoenviron. Eng.JGGEFK, 133(8), 1040–1047.
Beaven, R. P., Barker, J. A., and Hudson, A. (2003). “Description of a tracer test through waste and application of a double porosity model.” Proc., Sardinia 2003. Ninth Int. Waste Manage. and Landfill Symp.
Benson, C. H., Barlaz, M. A., Lane, D. T., and Rawe, J. M. (2007). “Practice review of five bioreactor/recirculation landfills.” Waste Manage.WAMAE2, 27(1), 13–29.
Benson, C., and Wang, X. (1998). “Soil water characteristic curves for solid waste.” Environ. Geotechnics Rep. 98-13, Dept. of Civil and Environ. Eng., Univ. of Wisconsin-Madison, 1–6.
Blight, G. E., Ball, J. M., and Blight, J. J. (1992). “Moisture and suction in sanitary landfills in semiarid areas.” J. Environ. Eng.JOEEDU, 118(6), 865–877.
Breitmeyer, R. J., and Benson, C. H. (2011). “Measurement of unsaturated hydraulic properties of municipal solid waste.” GeoFrontiers 2011 Advances in Geotech. Eng., GSP No. 211, Han, J. and Alazamora, D., eds., ASCE, Reston, VA, 1433–1442.
Breitmeyer, R. J., Bareither, C. A., Benson, C. H., Edil, T. B., and Barlaz, M. A. (2008). “Field-scale lysimeter experiment to study hydrologic and mechanical properties of municipal solid waste.” Proc., Global Waste Manage. Symp. 2008, Penton Media, 1–11.
Brooks, R. H., Corey, A. T. (1964). Hydraulic Properties of Porous Media, Colorado State Univ. Hydrology Paper No. 3., Colorado State Univ., Fort Collins, CO, 1–27.
Capelo, J., de Castro, M. A. H. (2007). “Measuring transient water flow in unsaturated municipal solid waste—a new experimental approach.” Waste Manage.WAMAE2, 27(6), 811–819.
Chen, Y., Han, K., Fredlund, G., Zhan, L., and Xie, Y. (2010). “Secondary compression of municipal solid wastes and a compression model for predicting settlement of municipal solid waste landfills.” J. Geotech. Geoenviron. Eng.JGGEFK, 136(5), 706–717.
Christensen, T. H., Kjeldsen, P., and Lindhardt, B. (1996). “Gas-generating processes in landfills.” In: Christensen, T. H., Cosu, R., Stegmann, R., eds., Landfilling of waste, Biogas. E & FN Spon, London.
The handbook of groundwater engineering, (1998). Ed. Delleur, J., CRC Press, Boca Raton, FL.
Durmusoglu, E., Corapcioglu, M. Y., and Tuncay, K. (2005). “Landfill settlement with decomposition and gas generation.” J. Environ. Eng.JOEEDU, 131(9), 1311–1321.
El-Fadel, M., Findikakis, A. N., and Leckie, J. O. (1997). “Modeling leachate generation and transport in solid waste landfills.” Environ. Technol.ENVTEV, 18(7), 669–686.
Gourc, J.-P., Staub, M. J., and Conte, M. (2010). “Decoupling MSW settlement into mechanical and biochemical processes—modelling and validation on large-scale setups.” Waste Manage.WAMAE2, 30(8-9), 1556–1568.
Haydar, M. M., and Khire, M. V. (2005). “Leachate recirculation using horizontal trenches in bioreactor landfills.” J. Geotech. Geoenviron. Eng.JGGEFK, 131(7), 837–847.
Hettiarachchi, H., Meegoda, J., and Hettiaratchi, P. (2009). “Effects of gas and moisture on modeling of bioreactor landfill settlement.” Waste Manage.WAMAE2, 29(3), 1018–1025.
Hudson, A. P., White, J. K., Beaven, R. P., and Powrie, W. (2004). “Modelling the compression behaviour of landfilled domestic waste.” Waste Manage.WAMAE2, 24(3), 259–269.
Kazimoglu, Y. K., McDougall, J. R., and Pyrah, I. C. (2005). “Moisture retention and movement in landfilled waste.” Proc., Geoprob 2005, Int. Conf. on Problematic Soils, Bilsel, H., ed., Eastern Mediterranean Univ., North Cyprus, Turkey, 307–314.
Khire, M. V., and Mukherjee, M. (2007). “Leachate injection using vertical wells in bioreactor landfills.” Waste Manage.WAMAE2, 27(9), 1233–1247.
Korfiatis, G. P., Demetracopoulos, A. C., Bouridimos, E. L., and Nawy, E. G. (1984). “Moisture transport in a solid waste column.” J. Environ. Eng.JOEEDU, 110(4), 789–796.
Machado, S. L., Carvalho, M. F., and Vilar, O. M. (2002). “Constitutive model for municipal solid waste.” J. Geotech. Geoenviron. Eng.JGGEFK, 128(11), 940–951.
McDougall, J. (2007). “A hydro-bio-mechanical model for settlement and other behaviour in landfilled waste.” Comput. Geotech.CGEOEU, 34(4), 229–246.
Münnich, K., Ziehmann, G., and Fricke, K. (2003). “Hydraulic behavior of mechanical biological pre-treated waste.” Proc., Sardinia 2003 Ninth Int. Waste Manage. and Landfill Symp., CISA, Padova, Italy.
Nahlawi, H., Bouazza, A., and Kodikara, J. (2007). “Characterisation of geotextiles water retention using a modified capillary pressure cell.” Geotext. Geomembr., 25(3), 186–193.
Olivier, F., and Gourc, J. P. (2007). “Hydro-mechanical behavior of municipal solid waste subject to leachate recirculation in a large-scale compression reactor cell.” Waste Manage.WAMAE2, 27(1), 44–58.
Orta de Velasquez, M. T., Cruz-Rivera, R., Rojas-Valencia, N., Monje-Ramirez, I., Sanchez-Gomez, J. (2003). “Determination of field capacity of municipal solid waste with surcharge simulation.” Waste Manage. Res.WMARD8, 21(2), 137–144.
Pommier, S., Chenu, D., Quintard, M., and Lefebvre, X. (2007). “A logistic model for the prediction of the influence of water on the solid waste methanisation in landfills.” Biotechnol. Bioeng.BIBIAU, 97(3), 473–482.
Reddy, K. R., Hettiarachchi, H., and Parakalla, N. (2009). “Hydraulic conductivity of MSW in landfills.” J. Environ. Eng.JOEEDU, 135(8), 677–683.
Reinhart, D. R., and Townsend, T. G. (1997). Landfill bioreactor design and operation. Lewis, Boca Raton, FL.
Reyes-Lopez, J. A., Ramirez-Hernandez, J., Lazaro-Mancilla, O., Martin-Loeches Garrido, M. (2008). “Assessment of groundwater contamination by landfill leachate: A case in Mexico.” Waste Manage.WAMAE2, 28(Supp. 1), S33–S39.
Rosqvist, H., and Destouni, G. (2000). “Solute transport through preferential pathways in municipal solid waste.” J. Contam. Hydrol.JCOHE6, 46(1–2), 39–60.
Staub, M., Gallieti, B., Oxarango, L., Khire, M. V., Gourc, J.-P. (2009). “Porosity and hydraulic conductivity of MSW using laboratory-scale tests.” Proc., HPM3, Third Int. Workshop Hydro-Physico-Mechanics of Landfills, Technische Universität Braunschweig, Braunschweig, Germany, 1–9.
Stoltz, G., Gourc, J.-P., and Oxarango, L. (2010a). “Liquid and gas permeabilities of unsaturated municipal solid waste under compression.” J. Contam. Hydrol.JCOHE6, 118(1–2), 27–42.
Stoltz, G., Gourc, J.-P., and Oxarango, L. (2010b). “Characterisation of the physico-mechanical parameters of MSW.” Waste Manage.WAMAE2, 30(8–9), 1439–1449.
Tinet, A.-J., et al. (2011). “Experimental and theoretical assessment of the multi-domain flow behaviour in a waste body during leachate infiltration.” Waste Manage.WAMAE2, 31(8), 1797–1806.
Tinjum, J. M., Benson, C. H., and Blotz, L. R. (1997). “Soil-water characteristic curves for compacted clays.” J. Geotech. Geoenviron. Eng.JGGEFK, 123(11), 1060–1069.
Van Genuchten, M. T. (1980). “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J.SSSJD4, 44(5), 892–898.
Vigneault, H., Lefebvre, R., and Nastev, M. (2004). “Numerical simulation of the radius of influence for landfill gas wells.” Vadose Zone, J.VZJAAB, 3(3), 909–916.
Yuen, S. T. S., Wang, Q. J., Styles, J. R., McMahon, T. A. (2001). “Water balance comparison between a dry and a wet landfill—a full-scale experiment.” J. Hydrol. (Amsterdam)JHYDA7, 251(1–2), 29–48.
Zamorano, M., Molero, E., Hurtado, A., Grindlay, A., and Ramos, A. (2008). “Evaluation of a municipal landfill site in Southern Spain with GIS-aided methodology.” J. Hazard. Mater.JHMAD9, 160(2-3), 473–481.
Zeiss, C., and Uguccioni, M. (1997). “Modified flow parameters for leachate generation.” Water Environ. Res.WAERED, 69(3), 276–284.
Zhan, T. L. T., Ling, D., Jang, W.-J., Chen, Y. (2008). “Hydrogeological characterization of Suzhou landfill of municipal solid wastes.” Proc., Geocongress 2008, Geotechnics of Waste Management and Remediation, ASCE, Reston, VA.
Zornberg, J. G., Jernigan, B. L., Sanglerat, T. R., and Cooley, B. H. (1999). “Retention of free liquids in landfills undergoing vertical expansion.” J. Geotech. Geoenviron. Eng.JGGEFK, 125(7), 583–594.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Dec 7, 2010
Accepted: Aug 14, 2011
Published online: Aug 17, 2011
Published in print: Apr 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.