Analytical Study on Progressive Pullout Behavior of a Soil Nail
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 138, Issue 4
Abstract
During the past few decades, soil nailing has been widely used for stabilizing slopes and excavations. The nail-soil interface shear resistance in the passive zone of a slope or excavation is a critical parameter in design. In this paper, an analytical study is proposed to investigate the progressive pullout response of a soil nail. Pullout process is divided into three typical phases: (1) the initial pure elastic phase during which the nail-soil interface follows a linear elastic stress-displacement relationship; (2) the elastic-plastic phase during which a transition point presents dividing the elastic and plastic zones; and (3) the final pure plastic phase. A comparison study between calculations and laboratory test data are presented to examine the effectiveness of the method. In addition, a comprehensive parametric study is performed to assess the effects of several key factors on the pullout resistance of a soil nail. These factors include the length and diameter, length of plastic zone, and the elastic modulus of a soil nail. Main research findings are presented and discussed to gain a better understanding of the progressive interaction between soil and soil nail.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial supports by a grant (PolyU 5320/07E) from the Research Grants Committee (RGC) of the Hong Kong Special Administrative Region Government of China and from The Hong Kong Polytechnic University are acknowledged. The financial support from the research committee of the University of Macau under research grant MYRG189(Y1-L3)-FST11-ZWH is also gratefully acknowledged.
References
Abramento, M., and Whittle, A. J. (1995). “Analysis of pullout test for planar reinforcements in soil.” J. Geotech. Eng., 121(6), 476–485.JGENDZ
Gurung, N. (2001). “1-D analytical solution for extensible and inextensible soil/rock reinforcement in pull-out tests.” Geotext Geomember, 19(4), 195–212.
Gurung, N., and Iwao, Y. (1999). “Analytical pull-out model for extensible soil-reinforcements.” Proc. JSCEF0028A, 624, 11–20.
Jewell, R. A. (1991). “Review of theoretical-models for soil nailing. Performance of reinforced soil structures.” Performance of reinforced soil structures, Thomas Telford, London, 265–275.
Luo, S. Q., Tan, S. A., Cheang, W., and Yong, K. Y. (2002). “Elastoplastic analysis of pull-out resistance of soil nails in dilatant soils.” Ground Improv., 6(4), 153–161.
Madhav, M. R., Gurung, N., and Iwao, Y. (1998). “A theoretical model for the pull-out response of geosynthetic reinforcement.” Geosynth. Int., 5(4), 399–424.GINTFD
Milligan, G. W. E., and Tei, K. (1998). “The pull-out resistance of model soil nails.” J. Soils Found., 38(2), 179–190.SOIFBE
Misra, A., and Chen, C. H. (2002). “Load displacement relationships for micropiles.” Deep foundations 2002: An international perspective on theory, design, construction, and performance, O’Neill, M. W. and Townsend, F. C., eds., Geotechnical Special Publication No. 116, ASCE, New York, 110–125.
Misra, A., and Chen, C. H. (2004). “Analytical solution for micropile design under tension and compression.” Geotech. Geol. Eng., 22(2), 199–255.
Misra, A., Chen, C. H., Oberoi, R., and Kleiber, A. (2004). “Simplified analysis method for micropile pullout behavior.” J. Geotech. Geoenviron. Eng., 130(10), 1024–1033.JGGEFK
Palmeira, E. M., and Milligan, G. W. E. (1989). “Scale and other factors affecting the results of pull-out tests of grids buried in sand.” Geotechnique, 39(3), 511–524.GTNQA8
Randolph, M. F., and Wroth, C. P. (1978). “Analysis of deformation of vertically loaded piles.” J. Geotech. Eng. Div., 104(12), 1465–1488.AJGEB6
Su, L. J., Chan, C., Terence, F., Yin, J. H., Shiu, Y. K., and Chiu, S. L. (2008). “Influence of overburden pressure on soil-nail pullout resistance in a compacted fill.” J. Geotech. Geoenviron. Eng., 134(9), 1339–1347.JGGEFK
Tei, K. (1993). “A study of soil nailing in sand.” Ph.D. thesis, Univ. of Oxford, Oxford, UK.
Wang, Z. G., and Richwien, W. (2002). “A study of soil-reinforcement interface friction.” J. Geotech. Geoenviron. Eng., 128(1), 92–94.JGGEFK
Wei, D. G. (2001). “Pile capacity in homogeneous softening soil.” Journal of the Japanese Geotechnical Society of Soils and Foundations, 41(2), 111–120.
Yin, J. H., and Su, L. J. (2006). “An innovative laboratory box for testing nail pull-out resistance in soil.” Geotech. Test. J., 29(6), 451–461.GTJODJ
Zhou, W. H., and Yin, J. H. (2008). “A simple mathematical model for soil nail and soil interaction analysis.” Comput. Geotech., 35(3), 479–488.CGEOEU
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jul 28, 2010
Accepted: Aug 2, 2011
Published online: Aug 5, 2011
Published in print: Apr 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.