Influence of Pore Fluid Viscosity on the Dynamic Properties of an Artificial Clay
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 137, Issue 12
Abstract
This paper presents the results of vane shear, laboratory compaction, isotropic consolidation, cyclic triaxial, bender element, and resonant-column tests that were performed to characterize the dynamic properties of an artificial soil called modified glyben. Modified glyben comprises a mixture of glycerin, water, and bentonite that can be used in scaled model tests performed at or in a centrifuge to study seismic soil–structure interaction. The results described in this paper show that the vane shear strength, coefficient of consolidation, dynamic modulus, and damping ratio are strongly influenced by the viscosity of the pore fluid which can be varied by altering the ratio of glycerin-to-water. In addition, the properties of modified glyben are stable during prolonged exposure to air and multiple largestrain load cycles making it a suitable model soil for scaled model tests involving seismic soil–structure interaction.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported in this paper has been funded by grants from the National Research Council of Canada and the University of Western Ontario Academic Development Fund. The help by Dr. Zahid Khan during resonant-column tests is appreciated.
References
Biscontin, G., and Pestana, J. M. (2001). “Influence of peripheral velocity on vane shearstrength of an artificial clay.” Geotech. Test. J., 24(4), 423–429.
Blaney, G., and Mallow, W. (1987). “Synthetic clay soil for dynamic model pile testsin dynamic response of pile foundations—Experiment, analysis, and observation.” Geotech. Spec. Pub. 11, ASCE, Reston, VA, 127–148.
Burr, J., Pender, M., and Larkin, T. (1997). “Dynamic response of laterally excited pilegroups.” J. Geotech. Geoenv. Eng., 123(1), 1–8.
Dorsey, N. E. (1940). Properties of ordinary water-substance in all its phases: Water-vapor, water and all the ices, Reinhold, New York.
Drnevich, V. P., Hardin, B. O., and Shippy, D. J. (1978). “Modulus and damping of soils by resonant-column method.” Dynamic Geotechnical Testing, ASTM STP 654, ASTM, West Conshohocken, 91–125.
Gibson, A. D. (1997). “Physical scale modeling of geotechnical structures at one-g.” Ph.D. thesis, California Institute of Technology, Pasadena, CA.
Huck, J. R., Noyel, G. A., and Jorat, L. J. (1988). “Dielectric properties of supercooled glycerol-water solutions.” IEEE Trans. Electr. Insul., 23(4), 627–638.
Ishibashi, I., and Zhang, X. (1993). “Unified dynamic shear moduli and damping ratios of sand and clay.” Soils Found., 33(1), 182–191.
Iskander, M. G., Liu, J., and Sadek, S. (2002). “Transparent amorphous silica to model clay.” J. Geotech. Geoenviron. Eng., 128(3), 262–273.
Jovicic, V., Coop, R., and Simic, M. (1996). “Objective criteria for determining from bender element tests.” Geotechnique, 46(2), 357–362.
Kenny, M. J., and Andrawes, K. Z. (1997). “The bearing capacity of footings on a sandlayer overlying soft clay.” Geotechnique, 47(2), 339–345.
Lee, J. S., and Santamarina, J. C. (2005). “Bender elements: Performance and signal interpretation.” J. Geotech. Geoenviron. Eng., 131(9), 1063–1070.
Lin, L., and Wang, L. (2006). “Seismic slope behavior in a large-scale shaking table model test.” Eng. Geol., 86(2-3), 118–133.
Meymand, P. J. (1998). “Shaking table scale model tests of nonlinear soil-pile-superstructure interaction in soft clay.” Ph.D. dissertation, Univ. of California, Berkeley, CA.
Morris, D. V., and Delphia, J. C. (1992). “Resonant column testing of dynamic rock properties.” Proc., 9th Conf. on Engineering Mechanics, ASCE, Reston, VA, 1105.
Moss, R., Rawlings, M., Caliendo, J., and Anderson, L. (1998). “Cyclic lateral loading of model pile groups in clay soil.” Proc., 3rd Conf. Geotechnical Earthquake Engineering and Soil Dynamics, ASCE, Reston, VA, 494–505.
Nunez, I., and Randolph, M. (1984). “Tension pile behavior in clay—Centrifuge modelling technique.” Proc., Symp. on the Application of Centrifuge Modelling to Geotech. Eng., Manchester, UK, 87–102.
Rayhani, M. T., and El Naggar, M. H. (2007). “Centrifuge modeling of seismic response of layered soft clay.” Bull. Earthquake Eng., 5(4), 571–589.
Rayhani, M. H. T., and El Naggar, M. H. (2008a). “Characterization of glyben for seismic applications.” Geotech. Test. J., 31(1), 24–31.
Rayhani, M. T., and El Naggar, M. H. (2008b). “Dynamic properties of soft clay and loose sand from seismic centrifuge tests.” J. Geotech. Geol. Eng., 26(5), 593–602.
Tavenas, F., Roy, M., and La Rochelle, P. (1973). “An artificial material for simulating champlain clays.” Can. Geotech. J., 10(3), 489–503.
Turan, A., Hinchberger, S. D., and El Naggar, M. H. (2009a). “Design and commissioning of a laminar soil container for use on small shaking tables.” Soil Dyn. Earthquake Eng., 29(2), 404–414.
Turan, A., Hinchberger, S. D., and El Naggar, M. H. (2009b). “Mechanical characterization of an artificial clay.” J. Geotech. Geoenviron. Eng., 135(2), 280–290.
Viggiani, G., and Atkinson, J. H. (1995). “Interpretation of bender element tests.” Geotechnique, 45(1), 149–154.
Vucetic, M., and Dobry, R. (1991). “Effect of soil plasticity on cyclic response.” J. Geotech. Eng., 117(1), 89–107.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jun 10, 2009
Accepted: Apr 12, 2011
Published online: Apr 14, 2011
Published in print: Dec 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.