Variables Controlling Stiffness and Strength of Lime-Stabilized Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 137, Issue 6
Abstract
Lime treatment is an attractive technique for soil improvement in the construction of rail tracks and pavement layers, in slope protection of earth dams, and as a support layer for shallow foundations. However, there are no dosage methodologies based on rational criteria as in the case of soil-cement technology, where the voids/cement ratio is shown to be a key parameter for the estimation of both strength and stiffness. The present study, therefore, was aimed at quantifying the influence of the amount of lime, porosity, and voids/lime ratio on the initial shear modulus () and unconfined compressive strength () of a lime-treated clayey sandy soil. From the results of unconfined compression tests and bender elements measurements, it was shown, for the soil-lime mixtures investigated, that the voids/lime ratio is an appropriate parameter to assess both initial stiffness and unconfined compressive strength. Also, a unique versus voids/lime ratio relationship was established linking the soil-lime mixture initial stiffness and compressive strength.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to express their gratitude to the Brazilian Council for Scientific and Technological Research/Brazilian Ministry of Science and Technology (CNPq/MCT—Projects Universal, PNPD, PQ, and INCT) for financial support to the research group. Thanks are also due to the Brazilian Electrical Energy Agency ANEEL (P&D UNSPECIFIED0089-036/2006).
References
British Standards Institute (BSI) Group. (1990). “Soil for civil engineering purposes.” British Standards methods of test No. BS 1377, London.
Brown, R. W. (1996). Practical foundation engineering handbook, McGraw-Hill, New York.
Consoli, N. C., Cruz, R. C., Floss, M. F., and Festugato, L. (2010). “Parameters controlling tensile and compressive strength of artificially cemented sand.” J. Geotech. Geoenviron. Eng., 136(5), 759–763.
Consoli, N. C., Foppa, D., Festugato, L., and Heineck, K. S. (2007). “Key parameters for strength control of artificially cemented soils.” J. Geotech. Geoenviron. Eng., 133(2), 197–205.
Consoli, N. C., Viana da Fonseca, A., Cruz, R. C., and Heineck, K. S. (2009). “Fundamental parameters for the stiffness and strength control of artificially cemented sand.” J. Geotech. Geoenviron. Eng., 135(9), 1347–1353.
Coop, M. R., and Atkinson, J. H. (1993). “The mechanics of cemented carbonated sands.” Géotechnique, 43(1), 53–67.
Dyvik, R., and Madshus, C. (1985). “Lab measurements of using bender elements.” Proc., Advances in the Art of Testing Soils under Cyclic Conditions, ASCE, New York.
Eades, J. L., and Grim, R. E. (1966). “A quick test to determine requirements for lime stabilization.” Highway research record, Vol. 139, Highway Research Board, Washington, DC, 61–72.
Hoyos, L. R., Puppala, A. J., and Chainuwat, P. (2004). “Dynamic properties of chemically stabilized sulphate rich clay.” J. Geotech. Geoenviron. Eng., 130(2), 153–162.
Ingles, O. G., and Metcalf, J. B. (1972). Soil stabilization: Principles and practice, Butterworth, Oxford, U.K.
Jovicic, V., Coop, M. R., and Simic, M. (1996). “Objective criteria for determining from bender element tests.” Géotechnique, 46(2), 357–362.
Mitchell, J. K. (1981). “Soil improvement—State-of-the-art report.” Proc., 10th Int. Conf. on Soil Mechanics and Foundation Eng., Int. Society of Soil Mechanics and Foundation Eng., Stockholm, Sweden, 509–565.
Mitchell, J. K., and Soga, K. (2005). Fundamentals of soil behavior, 3rd Ed., Wiley, Hoboken, NJ.
Pedarla, A., Chittoori, S., Puppala, A. J., Hoyos, L. R., and Saride, S. (2010). “Influence of lime dosage on stabilization effectiveness of montmorillonite dominant clays.” Proc., GeoFlorida 2010: Advances in Analysis, Modeling, and Design (GSP 199—ASCE), 767–776.
Puppala, A. J., Intharasombat, N., and Vempati, R. K. (2005). “Experimental studies on ettringite-induced heaving in soils.” J. Geotech. Geoenviron. Eng., 131(3), 325–337.
Puppala, A. J., Kadam, R., Madhyannapu, R. S., and Hoyos, L. R. (2006). “Small-strain shear moduli of chemically stabilized sulphate-bearing cohesive soils.” J. Geotech. Geoenviron. Eng., 132(3), 322–336.
Rogers, C. D. F., Glendinning, S., and Roff, T. E. J. (1997). “Lime modification of clay soils for construction expediency.” Proc., Institute of Civil Engineers, Geotechnical Engineering, 125(4), 242–249.
Shirley, D. J., and Hampton, L. D. (1978). “Shear-wave measurements in laboratory sediments.” J. Acoust. Soc. Am., 63(2), 607–613.
Transportation Research Board (TRB). (1987). “Lime stabilization—Reactions, properties, design, and construction.” State-of-the art Rep. No. 5, TRB, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Apr 16, 2010
Accepted: Oct 25, 2010
Published online: Oct 28, 2010
Published in print: Jun 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.