Estimating Fully Probabilistic Seismic Sliding Displacements of Slopes from a Pseudoprobabilistic Approach
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 137, Issue 3
Abstract
Permanent sliding displacements are used to evaluate the seismic stability of earth slopes, and current practice utilizes a pseudoprobabilistic approach to predict the expected sliding displacement. The pseudoprobabilistic approach specifies a design ground-motion level based on a probabilistic seismic hazard analysis and a specified hazard level (e.g., 2% probability of exceedance in 50 years), but the displacement is predicted deterministically based on the design ground-motion level. The fully probabilistic approach develops a hazard curve for sliding displacement, and it is used to assess the displacement of the slope for a given hazard level. Comparisons of the fully probabilistic and pseudoprobabilistic approaches indicate that the pseudoprobabilistic analysis provides nonconservative estimates of sliding displacement in most cases. This paper presents a modification to the pseudoprobabilistic approach that provides displacement values more consistent with the fully probabilistic approach. This modification involves specifying a displacement greater than the median, in order to take into account the uncertainty in the displacement prediction. The appropriate value of displacement above the median is a function of the value and the model used to predict the displacement.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to thank Dr. Peter Stafford of Imperial College and an anonymous reviewer for providing excellent technical comments on the manuscript. Ms. Teresa Howard of the University of Texas Center for Space Research drafted Fig. 4. Financial support for this work was provided by the United States Geological Survey (USGS), Department of the Interior, under Grant USDI08HQGR0024. The views and conclusions contained in this document are those of the writers and should not be interpreted as necessarily representing the official policies, either expressed or implied, of the United States government.
References
Alarcon, J. E., Booth, E., and Bommer, J. J. (2006). “Relationships between PGV and response spectral ordinates.” 1st European Conf. on Earthquake Engineering and Seismology, Paper 093, European Assoc. of Earthquake Engineering, Geneva.
Baker, J. W. (2007). “Correlation of ground motion intensity parameters used for predicting structural and geotechnical response.” 10th Int. Conf. Applications of Statistics and Probability in Civil Engineering, Taylor & Francis, London.
Bazzurro, P. (1998). “Probabilistic seismic demand analysis.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Stanford Univ., CA, 329.
Bazzurro, P., and Cornell, C. A. (2002). “Vector-valued probabilistic seismic hazard analysis (VPSHA).” 7th U.S. Nat. Conf. on Earthquake Engineering, Vol. II, EERI, Oakland, CA, 1313–1322.
Bommer, J. J. and Alarcon, J. E. (2006). “The prediction and use of peak ground velocity.” J. Earthquake Eng., 10(1), 1–31.
Boore, D. M., and Atkinson, G. M. (2008). “Ground-motion prediction equations for the average horizontal component of PPGA, PGV and 5%-damped PSA at spectral periods between 0.01 s and 10.0 s.” Earthquake Spectra, 24(1), 99–138.
Bray, J. D., and Travasarou, T. (2007). “Simplified procedure for estimating earthquake-induced deviatoric slope displacements.” J. Geotech. Geoenviron. Eng., 133(4), 381–392.
Del Gaudio, V., Pierri, P., and Wasowski, J. (2003). “An approach to time-probabilistic evaluation of seismically induced landslide hazard.” Bull. Seismol. Soc. Am., 93(2), 557–569.
Jalayer, F., and Cornell, C. A. (2009). “Alternative non-linear demand estimation methods for probability-based seismic assessments.” Earthquake Eng. Struct. Dyn., 38, 951–972.
Jibson, R. W. (2007). “Regression models for estimating coseismic landslide displacement.” Eng. Geol., 91, 209–218.
Luco, N. (2002). “Probabilistic seismic demand analysis, SMRF connection fractures, and near-source effects.” Ph.D. dissertation, Department of Civil and Environmental Engineering, Stanford Univ., Stanford, CA.
Luco, N., Ellingwood, B., Hamburger, R., Hooper, J., Kimball, J., and Kircher, C. (2007). “Risk-targeted versus current seismic design maps for the conterminous United States.” Proc. of the 2007 Structural Engineers Assoc. of California (SEAOC) Convention, Structural Engineers Assoc. of California, Lake Tahoe, CA, 163–175.
Makdisi, F. I., and Seed, H. B. (1978). “Simplified procedure for estimating dam and embankment earthquake induced deformations.” J. Geotech. Eng. Div., 104(GT7), 849–867.
Newmark, N. M. (1965). “Effects of earthquakes on dams and embankments.” Geotechnique, 15(2), 139–160.
Petersen, Mark D., et al. (2008). “Documentation for the 2008 update of the United States national seismic hazard maps.” Rep. 2008-1128, U.S. Geological Survey Open-File, 61.
Rathje, E. M., and Saygili, G. (2008). “Probabilistic seismic hazard analysis for the sliding displacement of slopes: Scalar and vector approaches.” J. Geotech. Geoenviron. Eng., 134(6), 804–814.
Rathje, E. M., and Saygili, G. (2009). “Probabilistic assessment of earthquake-induced sliding displacements of natural slopes.” Bull. N. Z. Soc. Earthquake Eng., 42, 18–27.
Saygili, G., and Rathje, E. M. (2008). “Empirical predictive models for earthquake-induced sliding displacements of slopes.” J. Geotech. Geoenviron. Eng., 134(6), 790–803.
Travasarou, T., Bray, J. B., and Der Kiureghian, A. (2004). “A probabilistic methodology for assessing seismic slope displacements.” Proc., 13th World Conf. on Earthquake Engineering, Paper 2326, Vancouver, Canada.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Sep 17, 2009
Accepted: Aug 23, 2010
Published online: Feb 15, 2011
Published in print: Mar 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.