Use of Impedance Probe for Estimation of Porosity Changes in Saturated Granular Filters under Cyclic Loading: Calibration and Application
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 136, Issue 10
Abstract
Gravimetric and volumetric sampling techniques are reliable for the measurement of porosity in fully saturated granular filters. However, both methods require a significant effort to gather and prepare samples, are time intensive to process, and do not capture real-time changes. Portable impedance probes serve as a valuable alternative to these destructive and laborious sampling methods. These probes measure the dielectric properties of the soil-water mixtures from which the porosity of filters may be inferred. This study demonstrates that generalized calibrations can result in large errors for porosity estimation when using diverse and small-scale filter types. By comparing with gravimetric and volumetric based porosity measurements for saturated granular filter porosity, impedance probes with filter-specific calibration offer the reliability and confidence owing to its reduced error in a quick, nondestructive fashion. This paper also presents the results of a laboratory investigation using an impedance probe to monitor real-time changes in the porosity of saturated granular filters subjected to cyclic train loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
Carrier, W. D., III. (2003). “Goodbye, Hazen; hello, Kozeny-Carman.” J. Geotech. Geoenviron. Eng., 129(11), 1054–1056.
Chang, W. J., Rathje, E. M., Stokoe, K. H., II, and Hazirbaba, K. (2007). “In situ pore pressure generation behavior of liquefiable sand.” J. Geotech. Geoenviron. Eng., 133(8), 921–931.
Christie, D. (2007). “Bulli field trial, pressure cells vertical and lateral pressure measurement.” Rail CRC Seminar, Univ. of Wollongong, New South Wales, Australia.
Delta-T Devices Ltd. (1999). Theta probe soil moisture sensor: Type ML2x user manual, Macaulay Land Use Research Institute, Cambridge, U.K.
Gaskin, G. J., and Miller, J. D. (1996). “Measurement of soil water content using a simplified impedance measuring technique.” J. Agric. Eng. Res., 63, 153–159.
Hazen, A. (1892). “Some physical properties of sands and gravels, with special reference to their use in filtration.” 24th Annual Report, Public Document No. 34, Massachusetts State Board of Health.
Head, K. H. (1982). Manual of soil laboratory testing, permeability, shear strength and compressibility tests, Vol. 2, Pentech Press, London.
Miller, J. D., and Gaskin, G. J. (2009). “ThetaProbe ML2x principles of operation and applications.” Macaulay Land Use Research Institute Technical Note (2nd ed.), ⟨www.macaulay.ac.uk/MRCS/pdf/tprobe.pdf⟩ (Oct. 9, 2009).
Miller, J. D., Gaskin, G. J., and Anderson, H. A. (1997). “From drought to flood: Catchment responses revealed using novel soil water probes.” Hydrolog. Process., 11(5), 533–541.
Nadler, A., Dasberg, S., and Lapid, I. (1991). “Time domain reflectometry measurements of water content and electrical conductivity of layered soil columns.” Soil Sci. Soc. Am. J., 55, 938–943.
Orense, R. P., Shimoma, S., Maeda, K., and Towhata, I. (2004). “Instrumented model slope failure due to water seepage.” J. Nat. Disaster Sci., 26(1), 15–26.
Roth, C. H., Malicki, M. A., and Plagge, R. (1992). “Empirical evaluation of the relationship between soil dielectric constant and volumetric content as the basis for calibrating soil moisture measurements.” J. Soil Sci., 43, 1–13.
Schneider, J. M., and Fratta, D. (2009). “Time-domain reflectometry—Parametric study for the evaluation of physical properties in soils.” Can. Geotech. J., 46, 753–767.
Tarantino, A., Ridley, A. M., and Toll, D. G. (2008). “Field measurement of suction, water content, and water permeability.” Geotech. Geologic. Eng., 26(6), 751–782.
Terzaghi, K., and Peck, R. (1964). Soil mechanics in engineering practice, Wiley, New York.
Topp, G. C., Davis, J. L., and Annan, A. P. (1980). “Electromagnetic determination of soil water content: Measurements in coaxial transmission lines.” Water Resour. Res., 16(3), 574–582.
Topp, G. C., and Ferre, P. A. (2002). “The soil solution phase.” Methods of soil analysis, J. H. Dane and G. C. Topp, eds., Vol. 5, SSSA, Madison, Wis., 417–534.
Topp, G. C., and Reynolds, W. D. (1998). “Time domain reflectrometry: A seminal technique for measuring mass and energy in soil.” Soil Tillage Res., 47, 125–132.
Whalley, W. R. (1993). “Considerations on the use of time-domain reflectometry (TDR) for measuring soil moisture content.” J. Soil Sci., 44, 1–9.
Wijaya, K., Nishimura, T., and Makoto, K. (2003). “Estimation of dry bulk density of soils using amplitude domain reflectometry probe.” J. Japan Soc. Soil Physics, 95, 63–73.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jan 7, 2009
Accepted: Feb 13, 2010
Published online: Sep 15, 2010
Published in print: Oct 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.