Flow Pattern for a Silo with Two Layers of Materials with Single or Double Openings
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 136, Issue 9
Abstract
For the silo flow of two materials with contrasting strengths, an automatic separation without mixing of the materials is observed during drawing. In the present paper, the writers observe that a columniform funnel flow will appear in a silo with a single opening while a uniform flow will occur for a silo with a double opening. The classical and popular Janssen equation is hence less suitable for a silo with a single opening than for a silo with a double opening. The development of the arch action arising from the contact force is investigated through the distinct element analysis for the two different types of silo. It is also found that there are significant differences in the velocity and stress fields between the two different types of silo, which are worth consideration in the design of the silo and the recovery of the mineral ore.
Get full access to this article
View all available purchase options and get full access to this article.
References
Benink, E. J. (1989). “Flow and stress analysis of cohesionless bulk materials in silo related to codes.” Ph.D. dissertation, Universität Twente, Enschede, Niederlande.
Beus, M. J., Iverson, S. R., and Stewart, W. M. (1998). “Application of physical modeling and particle flow analysis to evaluate ore-pass design.” Trans.-Inst. Min. Metall., 106, 110–117.
Briassoulis, D. (1991). “Limitations in the range of applicability of the classical silo theories.” ACI Struct. J., 88(4), 437–444.
Cheng, Y. M., Liu, Z. N., Song, W. D., and Au, S. K. (2009). “Laboratory test and particle flow simulation of silo problem with nonhomogeneous materials.” J. Geotech. Geoenviron. Eng., 135, 1754–1761.
Coetzee, C. J., and Els, D. N. J. (2009). “Calibration of discrete element parameters and the modeling of silo discharge and bucket filling.” Comput. Electron. Agric., 65(2), 198–212.
Enstad, G. G. (1981). “A novel theory on the arching and doming in mass flow hoppers.” Ph.D. dissertation, Chr. Michelsen Inst., Bergen, Norwegen.
Gavrilov, D., and Vinogradov, O. G. (1999). “Microinstabilities in a system of particles in silo during filing process.” Comput. Mech., 24, 166–174.
Hampe, E. (1987). Silos, Band 1 (Grundlagen), VEB Verlag für Bauwesen, Berlin.
Hirshfeld, D., and Rapaport, D. C. (2001). “Granular flow from a silo: Discrete-particle simulations in three dimensions.” Eur. Phys. J. E, 4(2), 193–199.
Janssen, H. A. (1895). “Getreidedruck in silozellen.” Z. Ver. Dtsch. Ing., 39, 1045–1049.
Jenike, A. W. (1961). “Gravity flow of bulk solids.” Bulletin No. 108, Utah Eng. Exp. Station, Univ. of Utah, Salt Lake City.
Jenike, A. W. (1970). “Storage and flow of solids.” Bulletin No. 123, Utah Eng. Exp. Station, Univ. of Utah, Salt Lake City.
Koenen, M. (1896). “Berechnung des seiten-und bodendrucks, silozellen.” Centralblatt der Bauverwaltung, 16, 446–449.
Langston, P. A., Ai-Awamleh, M. A., Fraige, F. Y., and Asmar, B. N. (2004). “Distinct element modeling of non-spherical frictionless particle flow.” Chem. Eng. Sci., 59(2), 425–435.
Liu, C. Y., Zhang, Q., and Chen, Y. (2008). PFC3D simulations of lateral pressures in model bins, American Society of Agricultural and Biological Engineers, St. Joseph, Mich.
Martens, P., ed. (1988). Silohandbuch, Wilhelm Ernst & Sohn Verlag, Berlin.
Masson, S., and Martinez, J. (2000). “Effect of particle mechanical properties on silo flow and stresses from distinct element simulations.” Powder Technol., 109, 164–178.
Parisi, D. R., Masson, S., and Martinez, J. (2004). “Partitioned distinct element method simulation of granular flow within industrial silos.” J. Eng. Mech., 130(7), 771–779.
Rotter, J. M., Holst, J. M. F. G., Ooi, J. Y., and Sanad, A. M. (1998). “Silo pressure predictions using discrete-element and finite-element analyses.” Philos. Trans. R. Soc. London, Ser. A, 356, 2685–2712.
Thornton, C. (1989). “Application of DEM to process engineering problems.” DEM 1st U.S. Conf., Colorado School of Mines, Golden, Colo.
Walker, D. M. (1966). “An approximate theory for pressures and arching in hoppers.” Chem. Eng. Sci., 21, 975–997.
Walker, D. M. (1967). “A basis for bunker design.” Powder Technol., 1, 228–236.
Walters, J. K. (1973a). “A theoretical analysis of stresses in silo with vertical walls.” Chem. Eng. Sci., 28, 13–21.
Walters, J. K. (1973b). “A theoretical analysis of stresses in axially-symmetric hoppers and bunkers.” Chem. Eng. Sci., 28, 779–789.
Wolf, K. (1984). “Der anfangsschlag und andere belastungsgrößen im silo.” Ph.D. dissertation, TU Braunschweig, Braunschweig, Germany.
Yoshida, J. (1994). “An analytical study on the pulsation phenomenon of granular materials in silo during discharge.” Adv. Powder Technol., 5(1), 85–98.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jul 13, 2009
Accepted: Jan 30, 2010
Published online: Aug 13, 2010
Published in print: Sep 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.