Efficient Evaluation of Reliability for Slopes with Circular Slip Surfaces Using Importance Sampling
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 135, Issue 6
Abstract
Evaluating the reliability of a slope is a challenging task because the possible slip surface is not known beforehand. Approximate methods via the first-order reliability method provide efficient ways of evaluating failure probability of the “most probable” failure surface. The tradeoff is that the failure probability estimates may be biased towards the unconservative side. The Monte Carlo simulation (MCS) is a viable unbiased way of estimating the failure probability of a slope, but MCS is inefficient for problems with small failure probabilities. This study proposes a novel way based on the importance sampling technique of estimating slope reliability that is unbiased and yet is much more efficient than MCS. In particular, the critical issue of the specification of the importance sampling probability density function will be addressed in detail. Three examples of slope reliability will be used to demonstrate the performance of the new method.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alonzo, E. E. (1976). “Risk analysis of slopes and its application to slopes in sensitive Canadian clays.” Geotechnique, 25(3), 453–472.
Ang, A. H. S., and Tang, W. H. (1984). Probability concepts in engineering planning and design. Vol. II: Decision, risk, and reliability, Wiley, New York.
Au, S. K., and Beck, J. L. (2003). Struct. Safety, 25(2), 139–163.
Bhattacharya, G., Jana, D., Ojha, S., and Chakraborty, S. (2003). “Direct search for minimum reliability index of earth slopes.” Comp. Geotechn., 30, 455–462.
Bishop, A. W. (1955). “The use of the slip circle in the stability analysis of slopes.” Geotechnique, 5, 7–17.
Chowdhury, R. N., and Xu, D. W. (1993). “Rational polynomial technique in slope-reliability analysis.” J. Geotech. Engrg., 119(12), 1910–1928.
Chowdhury, R. N., and Xu, D. W. (1995). “Geotechnical system reliability of slopes.” Reliab. Eng. Syst. Saf., 47, 141–151.
Christian, J. T., Ladd, C. C., and Baecher, G. B. (1994). “Reliability applied to slope stability analysis.” J. Geotech. Engrg., 120(12), 2180–2207.
Cornell, C. A. (1971). “First-order uncertainty analysis of soils deformation and stability.” Proc., 1st Int. Conf. on Application of Statistics and Probability to Soil and Structural Engineering, 130–144.
Duncan, J. M., and Wright, S. G. (1980). “The accuracy of equilibrium methods of slope stability analysis.” Eng. Geol. (Amsterdam), 16(1), 5–17.
Fellenius, W. (1936). “Calculation of the stability of earth dams.” Proc. Transactions of 2nd Congress on Large Dams, 445–462.
Griffiths, D. V., and Fenton, G. A. (2004). “Probabilistic slope stability analysis by finite elements.” J. Geotech. Geoenviron. Eng., 130(5), 507–518.
Griffiths, D. V., Fenton, G. A., and Denavit, M. D. (2007). “Traditional and advanced probabilistic slope stability analysis.” GSP 170 Probabilistic applications in geotechnical engineering, GeoDenver 2007: New Peaks in Geotechnics.
Ireland, H. O. (1954). “Stability analysis of the Congress Street cut in Chicago.” Geotechnique, 4(4), 163–168.
Janbu, N. (1968). “Slope stability computations.” Soil Mechanics and Foundation Engineering Rep. Technical Univ. of Norway, Trondheim, Norway.
Low, B. K., Gilbert, R. B., and Wright, S. G. (1998). “Slope reliability using generalized method of slice.” J. Geotech. Geoenviron. Eng., 124(4), 350–362.
Low, B. K., and Tang, W. H. (1997). “Probabilistic slope analysis using Janbu’s generalized method of slices.” Comp. Geotechn., 21(2), 121–142.
Melchers, R. E. (1989). “Importance sampling in structural systems.” Struct. Safety, 6, 3–10.
Morgenstern, N. R., and Price, V. E. (1965). “The analysis of the stability of general slip surfaces.” Geotechnique, 15(1), 79–93.
Oka, Y., and Wu, T. H. (1990). “System reliability of slope stability.” J. Geotech. Engrg., 116(8), 1185–1189.
Rosenblatt, M. (1952). “Remarks on a multivariate transformation.” Ann. Math. Stat., 23, 470–472.
Rubinstein, R. Y. (1981). Simulation and the Monte-Carlo method, Wiley, New York.
Shinozuka, M. (1983). “Basic analysis of structural safety.” J. Struct. Eng.. 109, 721–740.
Siegel, R. A. (1975). STABL user manual, Joint Highway Research Project 75–9, School of Engineering, Purdue Univ., West Lafayette, Ind.
Spencer, E. (1967). “A method of analysis of the stability of embankments assuming parallel interslice forces.” Geotechnique, 17(1), 11–26.
Vanmarcke, E. H. (1977). “Reliability of earth slopes.” J. Geotech. Engrg. Div., 103(11), 1247–1265.
Xue, J. F., and Gavin, K. (2007). “Simultaneous determination of critical slip surface and reliability index for slopes.” J. Geotech. Geoenviron. Eng., 133(7), 878–886.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jan 31, 2008
Accepted: Sep 13, 2008
Published online: May 15, 2009
Published in print: Jun 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.