A Novel Energy-Based Method to Evaluate Layered Rock Brittleness
Publication: International Journal of Geomechanics
Volume 23, Issue 1
Abstract
Rock brittleness plays an important role in rock engineering, thus it is practically valuable to assess rock brittleness accurately. Many brittleness indices have been developed, but few methods are developed for layered rocks. Based on energy evolution, the authors propose a new index for assessing brittleness of layered rocks. The new index indicates that high rock brittleness means elastic energy accumulated effectively before peak and dissipated abruptly after peak. For the sake of verifying the proposed method, a series of compression tests were performed. The results demonstrate that rock brittleness decreases gradually with increasing confining pressure. As orientation angle increases, rock brittleness weakens and then strengthens overall. The brittleness of the specimen with an orientation angle of 0° is slightly higher than that with an orientation angle of 90°. The new index was compared with three existing brittleness indices, and the results indicate that the proposed method can evaluate brittleness of layered rock effectively.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
We thank the project supported by the National Natural Science Foundation of China (Nos. U20A20314 and 42277183).
Notation
The following symbols are used in this paper:
- Eh
- elastic modulus in the isotropic plane;
- Ev
- elastic modulus in the direction perpendicular to the isotropic plane;
- Ur
- rupture energy;
- elastic energy before peak point;
- cumulative dissipated energy after peak point;
- total absorbed energy before peak point;
- cumulative dissipated energy before peak point;
- released elastic energy after peak point;
- residual elastic energy;
- α
- orientation angle;
- ɛa, ɛr
- axial and radial strains;
- ɛap, ɛrp
- axial and radial strains at peak point;
- σ1, σ2, σ3
- principal stresses;
- σp
- peak stress;
- σr
- residual stress; and
- υ
- Poisson’s ratio.
References
Ai, C., J. Zhang, Y.-w. Li, J. Zeng, X.-l. Yang, and J.-g. Wang. 2016. “Estimation criteria for rock brittleness based on energy analysis during the rupturing process.” Rock Mech. Rock Eng. 49: 4681–4698. https://doi.org/10.1007/s00603-016-1078-x.
Beck, D. A., and B. H. G. Brady. 2002. “Evaluation and application of controlling parameters for seismic events in hard-rock mines.” Int. J. Rock Mech. Min. Sci. 39: 633–642. https://doi.org/10.1016/S1365-1609(02)00061-8.
Bishop, A. W. 1967. “Progressive failure with special reference to the mechanism causing it.” In Proc., of the Geotechnical Conf., 142–150. Oslo, Norway: Norwegian Geotechnical Institute.
Brady, B. H. G., and E. T. Brown. 2006. Rock mechanics for underground mining. 3rd ed. Dordrecht, Netherlands: Springer.
Cho, J.-W., H. Kim, S. Jeon, and K.-B. Min. 2012. “Deformation and strength anisotropy of Asan gneiss, Boryeong shale, and Yeoncheon schist.” Int. J. Rock Mech. Min. Sci. 50: 158–169. https://doi.org/10.1016/j.ijrmms.2011.12.004.
Debecker, B., and A. Vervoort. 2009. “Experimental observation of fracture patterns in layered slate.” Int. J. Fract. 159: 51–62. https://doi.org/10.1007/s10704-009-9382-z.
Dollinger, G. L., H. J. Handewith, and C. D. Breeds. 1998. “Use of the punch test for estimating TBM performance.” Tunnelling Underground Space Technol. 13: 403–408. https://doi.org/10.1016/S0886-7798(98)00083-2.
Gaziev, E. 2001. “Rupture energy evaluation for brittle materials.” Int. J. Solids Struct. 38: 7681–7690. https://doi.org/10.1016/S0020-7683(01)00037-3.
Göktan, R. M. 1991. “Brittleness and micro-scale rock cutting efficiency.” Min. Sci. Technol. 13: 237–241. https://doi.org/10.1016/0167-9031(91)90339-E.
Gould, P. L., and Y. Feng. 2018. Introduction to linear elasticity. 4th ed. New York: Springer.
Guo, Z., X.-Y. Li, C. Liu, X. Feng, and Y. Shen. 2013. “A shale rock physics model for analysis of brittleness index, mineralogy and porosity in the Barnett Shale.” J. Geophys. Eng. 10: 025006. https://doi.org/10.1088/1742-2132/10/2/025006.
Hajiabdolmajid, V., and P. Kaiser. 2003. “Brittleness of rock and stability assessment in hard rock tunneling.” Tunnelling Underground Space Technol. 18: 35–48. https://doi.org/10.1016/S0886-7798(02)00100-1.
Hetenyi, M. 1966. Handbook of experimental stress analysis. New York: Wiley.
Hou, P., F. Gao, Y. Ju, L. Xin, Z. Zhang, H. Cheng, and Y. Gao. 2016. “Experimental investigation on the failure and acoustic emission characteristics of shale, sandstone and coal under gas fracturing.” J. Nat. Gas Sci. Eng. 35: 211–223. https://doi.org/10.1016/j.jngse.2016.08.048.
Hucka, V., and B. Das. 1974. “Brittleness determination of rocks by different methods.” Int. J. Rock Mech. Min. Sci. 11: 389–392. https://doi.org/10.1016/0148-9062(74)91109-7.
Jarvie, D. M., R. J. Hill, T. E. Ruble, and R. M. Pollastro. 2007. “Unconventional shale-gas systems: The Mississippian Barnett Shale of north-central Texas as one model for thermogenic shale-gas assessment.” AAPG Bull. 91: 475–499. https://doi.org/10.1306/12190606068.
Lawn, B. R., and D. B. Marshall. 1979. “Hardness, toughness, and brittleness: An indentation analysis.” J. Am. Ceram. Soc. 62: 347–350. https://doi.org/10.1111/j.1151-2916.1979.tb19075.x.
Li, N., Y. Zou, S. Zhang, X. Ma, X. Zhu, S. Li, and T. Cao. 2019a. “Rock brittleness evaluation based on energy dissipation under triaxial compression.” J. Pet. Sci. Eng. 183: 106349. https://doi.org/10.1016/j.petrol.2019.106349.
Li, Y., M. Long, L. Zuo, W. Li, and W. Zhao. 2019b. “Brittleness evaluation of coal based on statistical damage and energy evolution theory.” J. Pet. Sci. Eng. 172: 753–763. https://doi.org/10.1016/j.petrol.2018.08.069.
Liu, Z. S., and Z. D. Sun. 2015. “New brittleness indexes and their application in shale/clay gas reservoir prediction.” Pet. Explor. Dev. 42: 117–124.
Martin, C. D. 1996. “Brittle failure of rock materials: Test results and constitutive models.” Can. Geotech. J. 33: 378–378. https://doi.org/10.1139/t96-901.
Marsh, H. W., Z. Wen, and K.-T. Hau. 2004. “Structural equation models of latent interactions: Evaluation of alternative estimation strategies and indicator construction.” Psychol. Methods 9: 275–300. https://doi.org/10.1037/1082-989X.9.3.275.
Meng, F., L. N. Y. Wong, and H. Zhou. 2021. “Rock brittleness indices and their applications to different fields of rock engineering: A review.” J. Rock Mech. Geotech. Eng. 13: 221–247. https://doi.org/10.1016/j.jrmge.2020.06.008.
Meng, F., H. Zhou, C. Zhang, R. Xu, and J. Lu. 2015. “Evaluation methodology of brittleness of rock based on post-peak stress-strain curves.” Rock Mech. Rock Eng. 48: 1787–1805. https://doi.org/10.1007/s00603-014-0694-6.
Miskimins, J. L. 2012. “The impact of mechanical stratigraphy on hydraulic fracture growth and design considerations for horizontal wells.” Bulletin 91: 475–499.
Morley, A. 1944. Strength of materials: With 260 diagrams and numerous examples. New York: Longmans, Green and Company.
Obert, L., and W. I. Duvall. 1967. Rock mechanics and the design of structures in rock. New York: Wiley.
Özfırat, M. K., H. Yenice, F. Simsir, and O. Yarali. 2016. “A new approach to rock brittleness and its usability at prediction of drillability.” J. Afr. Earth. Sci. 119: 94–101. https://doi.org/10.1016/j.jafrearsci.2016.03.017.
Rahimzadeh, K. I., M. Ameri, and H. Molladavoodi. 2018. “Shale brittleness evaluation based on energy balance analysis of stress-strain curves.” J. Pet. Sci. Eng. 167: 1–19. https://doi.org/10.1016/j.petrol.2018.03.061.
Ramsay, J. G. 1967. Folding and fracturing of rocks. London: McGraw-Hill.
Reichmuth, D. R. 1967. “Point load testing of brittle materials to determine tensile strength and relative brittleness.” In Proc., 9th US Symp. on Rock Mechanics, 134–159. Alexandria, VA: American Rock Mechanics Association.
Rickman, R., M. Mullen, E. Petre, B. Grieser, D. Kundert, and S. Halliburton. 2008. “A practical use of shale petrophysics for stimulation design optimization: All shale plays are not clones of the Barnett Shale.” In Society of Petroleum Engineerings Annual Technical Conference and Exhibition, 1–11. Richardson, TX: SPE.
Shi, X., J. Wang, X. Ge, Z. Han, G. Qu, and S. Jiang. 2017. “A new method for rock brittleness evaluation in tight oil formation from conventional logs and petrophysical data.” J. Pet. Sci. Eng. 151: 169–182. https://doi.org/10.1016/j.petrol.2016.12.036.
Tang, L. Z., C. L. Pan, and W. X. Wang. 2002. “Surplus energy index for analyzing rock burst proneness.” J. Cent. South Univ. Technol. 33 (2): 129–132.
Tarasov, B., and Y. Potvin. 2013. “Universal criteria for rock brittleness estimation under triaxial compression.” Int. J. Rock Mech. Min. Sci. 59: 57–69. https://doi.org/10.1016/j.ijrmms.2012.12.011.
Tarasov, B. G., and M. F. Randolph. 2011. “Superbrittleness of rocks and earthquake activity.” Int. J. Rock Mech. Min. Sci. 48: 888–898. https://doi.org/10.1016/j.ijrmms.2011.06.013.
Wang, F. P., and J. F. W. Gale. 2009. “Screening criteria for shale-gas systems.” Gulf Coast Assoc. Geol. Soc. Trans. 59: 779–793.
Wang, Z., Z. Zong, L. Qiao, and W. Li. 2018. “Elastoplastic model for transversely isotropic rocks.” Int. J. Geomech. 18: 04017149. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001070.
Wasantha, P. L. P., P. G. Ranjith, and S. S. Shao. 2014. “Energy monitoring and analysis during deformation of bedded-sandstone: Use of acoustic emission.” Ultrasonics 54: 217–226. https://doi.org/10.1016/j.ultras.2013.06.015.
Wawersik, W. R., and C. Fairhurst. 1970. “A study of brittle rock fracture in laboratory compression experiments.” Int. J. Rock Mech. Min. Sci. 7: 561–575. https://doi.org/10.1016/0148-9062(70)90007-0.
Wen, T., H. Tang, J. Ma, and Y. Liu. 2019. “Energy analysis of the deformation and failure process of sandstone and damage constitutive model.” KSCE J. Civ. Eng. 23: 513–524. https://doi.org/10.1007/s12205-018-0789-9.
Wen, T., H. Tang, and Y. Wang. 2020. “Brittleness evaluation based on the energy evolution throughout the failure process of rocks.” J. Pet. Sci. Eng. 194: 107361. https://doi.org/10.1016/j.petrol.2020.107361.
Wu, L. Z., J. T. Zhou, L. Luo, and L. P. Yang. 2022. “Rock dynamic fracture of a novel semi-circular-disk specimen.” Int. J. Rock Mech. Min. Sci. 152: 1–11. 105047. https://doi.org/10.1016/j.ijrmms.2022.105047.
Xie, H., L. Li, R. Peng, and Y. Ju. 2009. “Energy analysis and criteria for structural failure of rocks.” J. Rock Mech. Geotech. Eng. 1: 11–20. https://doi.org/10.3724/SP.J.1235.2009.00011.
Zhang, J., C. Ai, Y.-w. Li, M.-g. Che, R. Gao, and J. Zeng. 2018. “Energy-based brittleness index and acoustic emission characteristics of anisotropic coal under triaxial stress condition.” Rock Mech. Rock Eng. 51: 3343–3360. https://doi.org/10.1007/s00603-018-1535-9.
Zhang, Y., X.-T. Feng, X. Zhang, Z. Wang, M. Sharifzadeh, and C. Yang. 2019. “A novel application of strain energy for fracturing process analysis of hard rock under true triaxial compression.” Rock Mech. Rock Eng. 52: 4257–4272. https://doi.org/10.1007/s00603-019-01868-8.
Zuo, B. C., C. X. Chen, C. H. Liu, Q. Shen, G. F. Xiao, and X. W. Liu. 2004. “Research on similar material of slope simulation experiment.” [In Chinese.] Rock Soil Mech. 25: 1805–1808.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Nov 19, 2021
Accepted: Jul 15, 2022
Published online: Oct 25, 2022
Published in print: Jan 1, 2023
Discussion open until: Mar 25, 2023
ASCE Technical Topics:
- Brittleness
- Compression tests
- Elastic analysis
- Energy dissipation
- Engineering fundamentals
- Engineering mechanics
- Geology
- Geotechnical engineering
- Laboratory tests
- Layered systems
- Material mechanics
- Material properties
- Materials engineering
- Methodology (by type)
- Research methods (by type)
- Rocks
- Strength of materials
- Structural analysis
- Structural engineering
- Systems engineering
- Systems management
- Tests (by type)
- Thermodynamics
- Verification
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.