Analytical Solutions for General Three-Wedge Stability
Publication: International Journal of Geomechanics
Volume 22, Issue 12
Abstract
A force-based limit-equilibrium analysis is presented for the stability of a general two-dimensional, three-wedge sliding mass of soil with vertical or nonvertical interfaces between the wedges. The analysis is conducted using five failure planes and can accommodate variable conditions for wedge geometry, pore pressure, shear strength parameters, reinforcement, applied loads, and pseudostatic seismic coefficients. A constant factor of safety is assumed for each failure plane and reinforcement element, although this assumption can be relaxed through the selection of strength parameters. The factor of safety is obtained analytically and requires solving for the roots of a polynomial equation. A numerical example is provided to demonstrate the method and illustrate the importance of selected parameters, including wedge interface angles, for the stability of an earth slope. The analytical solutions take compact form, provide insight for the three-wedge method, and offer good capability to tailor conditions for applications that can be suitably characterized by wedge failure.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allen, T. M., and R. J. Bathurst. 2013. “Comparison of working stress and limit equilibrium behavior of reinforced soil walls.” In Sound Geotechnical Research to Practice: Honoring Robert D. Holtz II, Geotechnical Special Publication 230, edited by A. W. Stuedlein and B. R. Christopher, 500–514. Reston, VA: ASCE.
Allen, T. M., and R. J. Bathurst. 2018. “Application of the simplified stiffness method to design of reinforced soil walls.” J. Geotech. Geoenviron. Eng. 144 (5): 04018024. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001874.
Bathurst, R. J., and K. Hatami. 1998. “Seismic response analysis of a geosynthetic-reinforced soil retaining wall.” Geosynth. Int. 5 (1–2): 127–166. https://doi.org/10.1680/gein.5.0117.
Bathurst, R. J., D. Walters, N. Vlachopoulos, P. Burgess, and T. M. Allen. 2000. “Full scale testing of geosynthetic reinforced walls.” In Advances in Transportation and Geoenvironmental Systems Using Geosynthetics, Geotechnical Special Publication 103, edited by J. C. Zornberg and B. R. Christopher, 201–217. Reston, VA: ASCE.
Blatz, J. A., and R. J. Bathurst. 2003. “Limit equilibrium analysis of large-scale reinforced and unreinforced embankments loaded by a strip footing.” Can. Geotech. J. 40 (6): 1084–1092. https://doi.org/10.1139/t03-053.
Bonaparte, R., and G. R. Schmertmann. 1988. “Reinforcement extensibility in reinforced soil wall design.” In The application of polymeric reinforcement in soil retaining structures, edited by P. M. Jarrett and A. McGown, 409–457. Dordrecht, Netherlands: Springer. NATO ASI Series (Series E: Applied Sciences), 147.
Bonaparte, R., G. R. Schmertmann, and N. D. Williams. 1986. “Seismic design of slopes reinforced with geogrids and geotextiles.” In Proc., 3rd Int. Conf. on Geotextiles, 273–278. Austin, TX: International Geosynthetics Society. This proceeding is offered by the “International Geosynthetics Society” located in Austin Texas. https://www.geosyntheticssociety.org/proceedings/.
Bray, J. D., and T. Travasarou. 2009. “Pseudostatic coefficient for use in simplified seismic slope stability evaluation.” J. Geotech. Geoenviron. Eng. 135 (9): 1336–1340. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000012.
Dobie, M. J. D., and P. F. McCombie. 2015. “Reinforced soil design using a two-part wedge mechanism: Justification and evidence.” In Proc., 16th European Conf. on Soil Mechanics and Geotechnical Engineering, 1409–1414. London: ICE Publishing.
Duncan, J. M. 1996. “State of the art: Limit equilibrium and finite-element analysis of slopes.” J. Geotech. Eng. 122 (7): 577–596. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:7(577).
Duncan, J. M., and S. G. Wright. 1980. “The accuracy of equilibrium methods of slope stability analysis.” Eng. Geol. 16 (1): 5–17. https://doi.org/10.1016/0013-7952(80)90003-4.
Duncan, J. M., S. G. Wright, and T. L. Brandon. 2014. Soil strength and slope stability. 2nd ed. New York: Wiley.
El-Emam, M. M., R. J. Bathurst, and K. Hatami. 2004. “Numerical modeling of reinforced soil retaining walls subjected to base acceleration.” In Proc., 13th World Conf. on Earthquake Engineering, Paper No. 2621, 15 p. Vancouver, BC: Canadian Association for Earthquake Engineering.
Filz, G. M., J. J. B. Esterhuizen, and J. M. Duncan. 2001. “Progressive failure of lined waste impoundments.” J. Geotech. Geoenviron. Eng. 127 (10): 841–848. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:10(841).
Fox, P. J. 2004. “Analytical solutions for stability of slurry trench.” J. Geotech. Geoenviron. Eng. 130 (7): 749–758. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:7(749).
Fox, P. J. 2021a. “Analytical solutions for general two-wedge stability.” J. Geotech. Geoenviron. Eng. 147 (8): 04021075. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002508.
Fox, P. J. 2021b. “Analytical solutions for three-wedge stability with vertical wedge interfaces.” Int. J. Geomech. 21 (10): 04021194. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002126.
Fox, P. J. 2022a. “Erratum for ‘analytical solutions for three-wedge stability with vertical wedge interfaces’ by Patrick J. Fox.” Int. J. Geomech. 22 (2): 08221004. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002288.
Fox, P. J. 2022b. “Analytical solutions for active lateral earth force.” J. Geotech. Geoenviron. Eng. 148 (6): 06022005. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002806.
Gässler, G., and G. Gudehus. 1981. “Soil nailing—Some aspects of a new technique.” In Vol. 3 of Proc., 10th International Conference on Soil Mechanics and Foundation Engineering, 665–670. Rotterdam, Netherlands: A.A. Balkema. https://www.issmge.org/uploads/publications/1/35/1981_03_0130.pdf.
Giroud, J. P., and C. Ah-Line. 1984. “Design of earth and concrete covers for geomembranes.” In Proc., Int. Conf. on Geomembranes, 487–492. Roseville, MN: Industrial Fabrics Association International Publishers.
Giroud, J. P., N. D. Williams, T. Pelte, and J. F. Beech. 1995. “Stability of geosynthetic-soil layered systems on slopes.” Geosynth. Int. 2 (6): 1115–1148. https://doi.org/10.1680/gein.2.0048.
Griffiths, D. V., and P. A. Lane. 1999. “Slope stability analysis by finite elements.” Géotechnique 49 (3): 387–403. https://doi.org/10.1680/geot.1999.49.3.387.
Hong, Y.-S., R.-H. Chen, C.-S. Wu, and J.-R. Chen. 2005. “Shaking table tests and stability analysis of steep nailed slopes.” Can. Geotech. J. 42 (5): 1264–1279. https://doi.org/10.1139/t05-055.
Horii, K., H. Kishida, M. Tateyama, and F. Tatsuoka. 1994. “Computerized design method for geosynthetic-reinforced soil retaining walls for railway embankments.” In Recent Case Histories of Permanent Geosynthetic-Reinforced Soil Retaining Walls, edited by F. Tatsuoka and D. Leshchinsky, 205–218. Rotterdam, Netherlands: A.A. Balkema.
Huang, C.-C., and Y.-H. Chen. 2004. “Seismic stability of soil retaining walls situated on slope.” J. Geotech. Geoenviron. Eng. 130 (1): 45–57. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:1(45).
Huang, C. C., L. H. Chou, and F. Tatsuoka. 2003. “Seismic displacements of geosynthetic-reinforced soil modular block walls.” Geosynth. Int. 10 (1): 2–23. https://doi.org/10.1680/gein.2003.10.1.2.
Huang, C.-C., and H.-J. Wu. 2009. “Seismic displacement analysis of a reinforced soil model wall considering progressive development of reinforcement force.” Geosynth. Int. 16 (3): 222–234. https://doi.org/10.1680/gein.2009.16.3.222.
Ismeik, M., and E. Guler. 1998. “Effect of wall facing on the seismic stability of geosynthetic-reinforced retaining walls.” Geosynth. Int. 5 (1–2): 41–53. https://doi.org/10.1680/gein.5.0113.
Jewell, R. A., N. Paine, and R. I. Woods. 1984. “Design methods for steep reinforced embankments.” In Polymer Grid Reinforcement, 70–81. London: ICE Publishing. https://www.icevirtuallibrary.com/doi/abs/10.1680/pgr.02425.0014.
Koerner, R. M., and T.-Y. Soong. 1998. “Analysis and design of veneer cover soils.” In Vol. 1 of Proc., 6th Int. Conf. on Geosynthetics, 1–23. Roseville, MN: Industrial Fabrics Association International Publishers.
Koseki, J., R. J. Bathurst, E. Güler, J. Kuwano, and M. Maugeri. 2006. “Seismic stability of reinforced soil walls.” In Proc., 8th Int. Conf. on Geosynthetics, 28. Yokohama, Japan: Mill Press.
Leshchinsky, D., H. Ling, and G. Hanks. 1995. “Unified design approach to geosynthetic reinforced slopes and segmental walls.” Geosynth. Int. 2 (5): 845–881. https://doi.org/10.1680/gein.2.0039.
Ling, H. I., and D. Leshchinsky. 1997. “Seismic stability and permanent displacement of landfill cover systems.” J. Geotech. Geoenviron. Eng. 123 (2): 113–122. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:2(113).
Martin, J. P., and R. M. Koerner. 1985. “Geotechnical design considerations for geomembrane lined slopes: Slope stability.” Geotext. Geomembr. 2 (4): 299–321. https://doi.org/10.1016/0266-1144(85)90016-0.
Michalowski, R. L. 1995. “Slope stability analysis: A kinematical approach.” Géotechnique 45 (2): 283–293. https://doi.org/10.1680/geot.1995.45.2.283.
Michalowski, R. L. 2013. “Stability assessment of slopes with cracks using limit analysis.” Can. Geotech. J. 50 (10): 1011–1021. https://doi.org/10.1139/cgj-2012-0448.
NAVFAC (Naval Facilities Engineering Command). 1986. Soil mechanics, design manual 7.01. Alexandria, VA: NAVFAC. https://documents.pub/document/navfac-dm-701-soil-mechanics.html.
NCMA (National Concrete Masonry Association). 2010. Design manual for segmental retaining walls. 3rd ed. Herndon, VA: NCMA. https://ncma.org/resource/srw-design-manual/.
Palmeira, E. M. 2009. “Soil-geosynthetic interaction: Modelling and analysis.” Geotext. Geomembr. 27 (5): 368–390. https://doi.org/10.1016/j.geotexmem.2009.03.003.
Palmeira, E. M., and R. C. Gomes. 1996. “Comparisons of predicted and observed failure mechanisms in model reinforced soil walls.” Geosynth. Int. 3 (3): 329–347. https://doi.org/10.1680/gein.3.0065.
Qian, X., and R. M. Koerner. 2009. “Stability analysis when using an engineered berm to increase landfill space.” J. Geotech. Geoenviron. Eng. 135 (8): 1082–1091. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000065.
Qian, X., and R. M. Koerner. 2010. “Modification to translational failure analysis of landfills incorporating seismicity.” J. Geotech. Geoenviron. Eng. 136 (5): 718–727. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000281.
Seed, H. B., and H. A. Sultan. 1967. “Stability analyses for a sloping core embankment.” J. Soil Mech. Found. Div. 93 (4): 69–83. https://doi.org/10.1061/JSFEAQ.0001011.
Seed, R. B., J. K. Mitchell, and H. B. Seed. 1990. “Kettleman Hills waste landfill slope failure. II: Stability analyses.” J. Geotech. Eng. 116 (4): 669–690. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:4(669).
Stark, T. D., H. T. Eid, W. D. Evans, and P. E. Sherry. 2000. “Municipal solid waste slope failure. II: Stability analyses.” J. Geotech. Geoenviron. Eng. 126 (5): 408–419. https://doi.org/10.1061/(ASCE)1090-0241(2000)126:5(408).
Sultan, H. A., and H. B. Seed. 1967. “Stability of sloping core earth dams.” J. Soil Mech. Found. Div. 93 (4): 45–67. https://doi.org/10.1061/JSFEAQ.0001002.
Tatsuoka, F., J. Koseki, M. Tateyama, Y. Munaf, and K. Horii. 1998. “Seismic stability against high seismic loads on geosynthetic-reinforced soil retaining structures.” In Vol. 1 of Proc., 6th Int. Conf. on Geosynthetics, 103–142. Roseville, MN: Industrial Fabrics Association International.
Tatsuoka, F., and H. Yamauchi. 1986. “A reinforcing method for steep clay slopes using a non-woven geotextile.” Geotext. Geomembr. 4 (3–4): 241–268. https://doi.org/10.1016/0266-1144(86)90044-0.
Taylor, D. W. 1948. Fundamentals of soil mechanics. New York: Wiley.
USACE (US Army Corps of Engineers). 2003. Engineering and design: Slope stability. Manual EM 1110-2-1902. Washington, DC: USACE. https://www.publications.usace.army.mil/Portals/76/Publications/EngineerManuals/EM_1110-2-1902.pdf.
Wong, K. S., B. B. Broms, and B. Chandrasekaran. 1994. “Failure modes at model tests of a geotextile reinforced wall.” Geotext. Geomembr. 13 (6–7): 475–493. https://doi.org/10.1016/0266-1144(94)90009-4.
Woods, R. I., and R. A. Jewell. 1990. “A computer design method for reinforced soil structures.” Geotext. Geomembr. 9 (3): 233–259. https://doi.org/10.1016/0266-1144(90)90055-H.
Xie, Y., B. Leshchinsky, and J. Han. 2019. “Evaluation of bearing capacity on geosynthetic-reinforced soil structures considering multiple failure mechanisms.” J. Geotech. Geoenviron. Eng. 145 (9): 04019040. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002072.
Xu, P., and K. Hatami. 2019. “Sliding stability and lateral displacement analysis of reinforced soil retaining walls.” Geotext. Geomembr. 47 (4): 483–492. https://doi.org/10.1016/j.geotexmem.2019.03.004.
Yang, K.-H., P. Utomo, and T.-L. Liu. 2013. “Evaluation of force-equilibrium and deformation-based design approaches for predicting reinforcement loads within geosynthetic-reinforced soil structures.” J. Geo-Eng. 8 (2): 41–54.
Yang, K.-H., J. G. Zornberg, C.-N. Liu, and H.-D. Lin. 2012. “Stress distribution and development within geosynthetic-reinforced soil slopes.” Geosynth. Int. 19 (1): 62–78. https://doi.org/10.1680/gein.2012.19.1.62.
Yu, H. S., R. Salgado, S. W. Sloan, and J. M. Kim. 1998. “Limit analysis versus limit equilibrium for slope stability.” J. Geotech. Geoenviron. Eng. 124 (1): 1–11. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:1(1).
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Sep 24, 2021
Accepted: Apr 30, 2022
Published online: Sep 23, 2022
Published in print: Dec 1, 2022
Discussion open until: Feb 23, 2023
ASCE Technical Topics:
- Analysis (by type)
- Business management
- Continuum mechanics
- Dynamic loads
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering mechanics
- Equilibrium
- Failure analysis
- Geomechanics
- Geotechnical engineering
- Limit equilibrium
- Material mechanics
- Material properties
- Materials engineering
- Mathematics
- Parameters (statistics)
- Practice and Profession
- Public administration
- Public health and safety
- Safety
- Seismic loads
- Shear strength
- Soil analysis
- Soil mechanics
- Soil properties
- Solid mechanics
- Statics (mechanics)
- Statistics
- Strength of materials
- Structural dynamics
- Two-dimensional analysis
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.