Experimental Investigations on the Mechanical and Microscopic Behavior of Cement-Treated Clay Modified by Nano-MgO and Fibers
Publication: International Journal of Geomechanics
Volume 22, Issue 6
Abstract
Cement is often used to stabilize soft clay; however, it has some limitations in increasing clay strength and improving clay failure mode. To solve this, two different additives, i.e., polypropylene fiber and nano-Magnesium Oxide (MgO), were tested with the purpose of improving the mechanical performance of cement-treated soft clay. Four groups of samples with different mixture ratios of coastal soft clay, cement, fiber, and nano-MgO were first designed. Microscopy tests including X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS), as well as unconfined compression test was then carried out. XRD and EDS test results show that the cement hydration reaction is the main source of strength increase and the nano-MgO can generate Magnesium Silicate Hydrates (M-S-H) gelation, which helps to fill the pores of the clay and increase clay compactness. The unconfined compressive strength test results show that adding fiber or nano-MgO alone has a poor effect on the strength improvement for cement-treated clay with high water content. However, adding both additives lead to a significant increase in the clay’s unconfined compressive strength, which is verified by the microscopic observation of clay compactness in SEM images. Moreover, the fiber is found to increase the ductility of cement-treated clay based on the observed failure modes of modified samples.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded by the National Natural Science Foundation of China (Grant Nos. 41772311 and 52079099) and International scientific and technological cooperation projects of Shaoxing University (Project No. 2019LGGH1007).
References
Al-Homidy, A. A., M. H. Dahim, A. K. Abd El Aal. 2017. “Improvement of geotechnical properties of sabkha soil utilizing cement kiln dust.” J. Rock Mech. Geotech. Eng. 9 (4): 749–760. https://doi.org/10.1016/j.jrmge.2016.11.012.
Cai, Y., B. Shi, C. W. Ng, and C.-S. Tang. 2006. “Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil.” Eng. Geol. 87 (3–4): 230–240. https://doi.org/10.1016/j.enggeo.2006.07.007.
Changizi, F., and A. Haddad. 2015. “Strength properties of soft clay treated with mixture of nano-SiO2 and recycled polyester fiber.” J. Rock Mech. Geotech. Eng. 7 (4): 367–378. https://doi.org/10.1016/j.jrmge.2015.03.013.
Chegenizadeh, A., and H. Nikraz. 2011. “Effect of fibre content on compressive strength of reinforced soil.” In Proc., Int. Conf. on Advances in Geotechnical Engineering, 489–495. Perth, Australia: Dept. of Civil Engineering, Curtin Univ.
Choobbasti, A. J., M. A. Samakoosh, and S. S. Kutanaei. 2019. “Mechanical properties soil stabilized with nano calcium carbonate and reinforced with carpet waste fibers.” Constr. Build. Mater. 211: 1094–1104. https://doi.org/10.1016/j.conbuildmat.2019.03.306.
Estabragh, A., I. Beytolahpour, and A. Javadi. 2010. “Effect of resin on the strength of soil–cement mixture.” J. Mater. Civ. Eng. 23 (7): 969–976. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000252.
Gao, L., K.-Y. Ren, Z. Ren, and X.-J. Yu. 2017. “Study on the shear property of nano-MgO-modified soil.” Mar. Georesour. Geotechnol. 36 (4): 465–470. https://doi.org/10.1080/1064119X.2017.1335813.
Gao, L., Z. Ren, and X. Yu. 2015. “Experimental study of nanometer magnesium oxide-modified clay.” Soil Mech. Found. Eng. 52 (4): 218–224. https://doi.org/10.1007/s11204-015-9331-y.
Ghadakpour, M., A. J. Choobbasti, and S. S. Kutanaei. 2020. “Investigation of the kenaf fiber hybrid length on the properties of the cement-treated sandy soil.” Transp. Geotech. 22: 100301. https://doi.org/10.1016/j.trgeo.2019.100301.
Ghasabkolaei, N., A. Janalizadeh, M. Jahanshahi, N. Roshan, and S. E. Ghasemi. 2016. “Physical and geotechnical properties of cement-treated clayey soil using silica nanoparticles: An experimental study.” Eur. Phys. J. Plus 131 (5): 134. https://doi.org/10.1140/epjp/i2016-16134-3.
Hejazi, S. M., M. Sheikhzadeh, S. M. Abtahi, and A. Zadhoush. 2012. “A simple review of soil reinforcement by using natural and synthetic fibers.” Constr. Build. Mater. 30: 100–116. https://doi.org/10.1016/j.conbuildmat.2011.11.045.
Horpibulsuk, S., R. Rachan, and A. Suddeepong. 2012. “State of the art in strength development of soil–cement columns.” Proc. Inst. Civ. Eng.—Ground Improv. 165 (4): 201–215. https://doi.org/10.1680/grim.11.00006.
Hu, J., L. Jia, W. Wang, H. Wei, and J. Du. 2018. “Engineering characteristics and reinforcement approaches of organic sandy soil.” Adv. Civ. Eng. 2018: 1–12.
Jiang, P., L. Qiu, N. Li, W. Wang, A. Zhou, and J. Xiao. 2018. “Shearing performance of lime-reinforced iron tailing powder based on energy dissipation.” Adv. Civ. Eng. 2018: 1–8.
Jiang, M. J. 2019. “New paradigm for modern soil mechanics: Geomechanics from micro to macro.” [In Chinese.] Chin. J. Geotech. Eng. 41 (2): 195–254.
Kumar, A., B. S. Walia, and J. Mohan. 2006. “Compressive strength of fiber reinforced highly compressible clay.” Constr. Build. Mater. 20 (10): 1063–1068. https://doi.org/10.1016/j.conbuildmat.2005.02.027.
Li, K.-Q., D.-Q. Li, and Y. Liu. 2020a. “Meso-scale investigations on the effective thermal conductivity of multi-phase materials using the finite element method.” Int. J. Heat Mass Transfer 151: 119383. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119383.
Li, N., S. Lv, W. Wang, J. Guo, P. Jiang, and Y. Liu. 2020b. “Experimental investigations on the mechanical behavior of iron tailings powder with compound admixture of cement and nano-clay.” Constr. Build. Mater. 254: 119259. https://doi.org/10.1016/j.conbuildmat.2020.119259.
Liu, J., Y. Bai, Z. Song, D. P. Kanungo, Y. Wang, F. Bu, Z. Chen, and X. Shi. 2020. “Stabilization of sand using different types of short fibers and organic polymer.” Constr. Build. Mater. 253: 119164. https://doi.org/10.1016/j.conbuildmat.2020.119164.
Liu, Y., L. Q. He, Y. J. Jiang, M. M. Sun, E. J. Chen, and F. H. Lee. 2019. “Effect of in situ water content variation on the spatial variation of strength of deep cement-mixed clay.” Géotechnique 69 (5): 391–405. https://doi.org/10.1680/jgeot.17.P.149.
Mousavi, S. E. 2016. “Stabilization of compacted clay with cement and/or lime containing peat ash.” Road Mater. Pavement Des. 18 (6): 1304–1321. https://doi.org/10.1080/14680629.2016.1212729.
National Standard. 2019. Standard for soil test method. [In Chinese.] GB/T 50123-2019. Beijing: China Planning Press.
Saadeldin, R., and S. Siddiqua. 2013. “Geotechnical characterization of a clay–cement mix.” Bull. Eng. Geol. Environ. 72 (3–4): 601–608. https://doi.org/10.1007/s10064-013-0531-2.
Tang, C., B. Shi, W. Gao, F. Chen, and Y. Cai. 2007. “Strength and mechanical behavior of short polypropylene fiber reinforced and cement stabilized clayey soil.” Geotext. Geomembr. 25 (3): 194–202. https://doi.org/10.1016/j.geotexmem.2006.11.002.
Wang, D., H. Wang, S. Larsson, M. Benzerzour, W. Maherzi, and M. Amar. 2020. “Effect of basalt fiber inclusion on the mechanical properties and microstructure of cement-solidified kaolinite.” Constr. Build. Mater. 241: 118085. https://doi.org/10.1016/j.conbuildmat.2020.118085.
Wang, D., R. Zentar, and N. E. Abriak. 2017. “Temperature-accelerated strength development in stabilized marine soils as road construction materials.” J. Mater. Civ. Eng. 29 (5): 04016281. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001778.
Wang, L., D. Zheng, S. Zhang, H. Cui, and D. Li. 2016. “Effect of nano-SiO(2) on the hydration and microstructure of Portland cement.” Nanomaterials (Basel) 6 (12): 241. https://doi.org/10.3390/nano6120241.
Wang, W., C. Zhang, N. Li, F. Tao, and K. Yao. 2019. “Characterisation of nano magnesia–cement-reinforced seashore soft soil by direct-shear test.” Mar. Georesour. Geotechnol. 37 (8): 989–998. https://doi.org/10.1080/1064119X.2018.1515283.
Xiao, H., K. Yao, Y. Liu, S.-H. Goh, and F.-H. Lee. 2018. “Bender element measurement of small strain shear modulus of cement-treated marine clay—Effect of test setup and methodology.” Constr. Build. Mater. 172: 433–447. https://doi.org/10.1016/j.conbuildmat.2018.03.258.
Xiang, Y. L., Shuang, J. Z., Lei, X. D. 2020, “Mechanism analysis of strength of polypropylene fibers cement soil.” [In Chinese.] China Sciencepaper 6(15): 622–627.
Yang, B.-H., X.-Z. Weng, J.-Z. Liu, Y.-N. Kou, L. Jiang, H.-L. Li, and X.-C. Yan. 2017. “Strength characteristics of modified polypropylene fiber and cement-reinforced loess.” J. Cent. South Univ. 24 (3): 560–568. https://doi.org/10.1007/s11771-017-3458-0.
Yang, Y.-H., S.-G. Cheng, J.-Y. Gu, and X.-H. Hu. 2011. “Triaxial tests research on strength properties of the polypropylene fiber reinforced soil.” In Proc., 2011 Int. Conf. on Multimedia Technology, 1869–1872. Hangzhou, China: IEEE.
Yao, K., D. An, W. Wang, N. Li, C. Zhang, and A. Zhou. 2020. “Effect of nano-MgO on mechanical performance of cement stabilized silty clay.” Mar. Georesour. Geotechnol. 38 (2): 250–255. https://doi.org/10.1080/1064119X.2018.1564406.
Yao, K., W. Wang, N. Li, C. Zhang, and L. Wang. 2019. “Investigation on strength and microstructure characteristics of nano-MgO admixed with cemented soft soil.” Constr. Build. Mater. 206: 160–168. https://doi.org/10.1016/j.conbuildmat.2019.01.221.
Zaimoglu, A. S. 2015. “Optimization of unconfined compressive strength of fine-grained soils modified with polypropylene fibers and additive materials.” KSCE J. Civ. Eng. 19 (3): 578–582. https://doi.org/10.1007/s12205-015-1425-6.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 22 • Issue 6 • June 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Sep 23, 2020
Accepted: Jan 3, 2022
Published online: Mar 24, 2022
Published in print: Jun 1, 2022
Discussion open until: Aug 24, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Wei Wang, Jiale Luo, Na Li, Ben Li, Jian Li, Shaoyun Pu, Mechanical Properties and Microscopic Mechanism of Cement-Stabilized Calcareous Sand Improved with a Nano-MgO Additive, International Journal of Geomechanics, 10.1061/(ASCE)GM.1943-5622.0002644, 23, 2, (2023).
- Kun Fang, Liang Cui, Experimental investigation of evolutive mode-I and mode-II fracture behavior of fiber-reinforced cemented paste backfill: Effect of curing temperature and curing time, Frontiers of Structural and Civil Engineering, 10.1007/s11709-022-0924-z, (2023).
- Wei Wang, Beifeng Lv, Chen Zhang, Na Li, Shaoyun Pu, Mechanical Characteristics of Lime-Treated Subgrade Soil Improved by Polypropylene Fiber and Class F Fly Ash, Polymers, 10.3390/polym14142921, 14, 14, (2921), (2022).
- Beifeng Lv, Yinuo Zhao, Na Li, Yanfei Yu, Yanting Wu, Miaojie Gu, Triaxial Mechanical Properties and Mechanism of Waterborne Polyurethane-Reinforced Road Demolition Waste as Road Bases, Polymers, 10.3390/polym14132725, 14, 13, (2725), (2022).
- Zhichao Wang, Weiqing Zhang, Ping Jiang, Cuihong Li, The Elastic Modulus and Damage Stress–Strain Model of Polypropylene Fiber and Nano Clay Modified Lime Treated Soil under Axial Load, Polymers, 10.3390/polym14132606, 14, 13, (2606), (2022).
- Ping Jiang, Yewen Chen, Xinjiang Song, Na Li, Wei Wang, Erlu Wu, Study on Compressive Properties and Dynamic Characteristics of Polypropylene-Fiber-and-Cement-Modified Iron-Ore Tailing under Traffic Load, Polymers, 10.3390/polym14101995, 14, 10, (1995), (2022).
- Ting Zhu, Yitong Shou, Xiaoqing Chen, Beifeng Lv, Xianwen Huang, Yanfei Yu, Cuihong Li, Shear Behavior of Recycled Fine Aggregate Reinforced by Nano-MgO Modified Cement, Materials, 10.3390/ma15207188, 15, 20, (7188), (2022).
- Meng Xu, Xinman Ai, Liyao Huang, Lulu Fan, Jianhong Yang, Zhongshi Pei, Decheng Feng, Junyan Yi, Utilization of RCAs arising from excavated soil in CTBM: Laboratory characterization and environmental impact assessment, Journal of Cleaner Production, 10.1016/j.jclepro.2022.134221, 375, (134221), (2022).
- Jiale Luo, Aizhao Zhou, Na Li, Wei Wang, Jun Hu, Mechanical properties and microscopic characterization of cement stabilized calcareous sand modified by nano SiO2, Case Studies in Construction Materials, 10.1016/j.cscm.2022.e01636, 17, (e01636), (2022).
- Wei Wang, Yuxiang Wang, Beifeng Lv, Cuihong Li, Hanjun Kong, Strength characteristics of cement-reinforced recycled aggregate modified with nano-MgO as road bases, Case Studies in Construction Materials, 10.1016/j.cscm.2022.e01456, 17, (e01456), (2022).
- See more