Discontinuous Modeling of Roof Strata Caving in a Mechanized Longwall Mine in Tabas Coal Mine
Publication: International Journal of Geomechanics
Volume 22, Issue 5
Abstract
A better understanding of the interaction between shield supports, roof, and coal strata, along with the prediction of roof deformation and caving behavior is essential for successful longwall mining operations. The stability of a longwall face can be improved by caving of the roof strata, which can lead to decreasing the load on the powered supports and the magnitude of stress on the abutment pillar of the longwall face. This paper presents the application of the synthetic rock mass (SRM) numerical modeling approach for the simulation of the roof caving mechanism and the load on shield supports in a longwall coal mine in Iran. Using geological and geotechnical data from the mine, a two-dimensional SRM, based on the incorporation of a discrete fracture network into a bonded particle model, was used to simulate the coal seam and the jointed roof strata. The results of the numerical models were validated by comparing the span of first caving, caving height, and load on the support shields to field measurements, observations, and previous studies. The proposed numerical approach can be utilized as a reliable tool in the design and safe operation of a longwall panel with a better understanding of the caved, damaged, and deformed zones above it.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to the management of the Tabas coal mine, and in particular Ali Hosseini, chair of education, for their cooperation in the compilation of necessary data pertinent to this study.
References
Arasteh, H., and G. Saeedi. 2017. “Studying hygienic status of mechanized long wall face from the perspective of the existing dust containing silica in Tabas coal mine.” Geotech. Geol. Eng. 35 (1): 213–224. https://doi.org/10.1007/s10706-016-0099-2.
Ardehjani, E. A., M. Ataei, and R. Rafiee. 2020. “Estimation of first and periodic roof weighting effect interval in mechanized longwall mining using numerical modeling.” Int. J. Geomech. 20 (2): 04019164. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001532.
Aziznejad, S., K. Esmaeili, J. Hadjigeorgiou, and D. Labrie. 2018. “Responses of jointed rock masses subjected to impact loading.” J. Rock Mech. Geotech. Eng. 10 (4): 624–634. https://doi.org/10.1016/j.jrmge.2017.12.006.
Bahaaddini, M., G. Sharrock, and B. K. Hebblewhite. 2013. “Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression.” Comput. Geotech. 49: 206–225. https://doi.org/10.1016/j.compgeo.2012.10.012.
Barczak, T. M. 1992. Examination of design and operation practices for longwall shields. Bureau of Mines Information Circular, IC 9320. Washington, DC: United States Dept. of the Interior.
Barczak, T. M., and D. F. Gearhart. 1992. Canopy and base load distribution on a longwall shield. Bureau of Mines Information Circular, RI 9418. United States Department of the Interior.
Barczak, T. M., and D. E. Schwemmer. 1988. Stiffness characteristics of longwall shields. Bureau of Mines, Report of Investigation, RI9154. United States Dept. of the Interior.
Bilinski, A., and W. Konopko. 1973. “Criteria of choice and use of powered supports.” In ISRM Int. Symp. Lisbon, Portugal: International Society for Rock Mechanics and Rock Engineering, ISRM-IS-1973-030.
Cundall, P. A. 2001. “A discontinuous future for numerical modelling in geomechanics.” Proc. Inst. Civ. Eng. Geotech. Eng. 149 (1): 41–47. https://doi.org/10.1680/geng.2001.149.1.41.
Diederichs, M. S., and P. K. Kaiser. 1999. “Stability of large excavation in laminated hard rock masses: the voussoir analogue revisited.” Int. J. Rock Mech. Min. Sci. 36: 97–117. https://doi.org/10.1016/S0148-9062(98)00180-6.
Esmaeili, K., J. Hadjigeorgiou, and M. Grenon. 2010. “Estimating geometrical and mechanical REV based on synthetic rock mass models at Brunswick Mine.” Int. J. Rock Mech. Min. Sci. 47 (6): 915–926. https://doi.org/10.1016/j.ijrmms.2010.05.010.
Esmaeili, K., J. Hadjigeorgiou, and M. Grenon. 2013. “Stability analysis of the 19A ore pass at Brunswick mine using a two-stage numerical modeling approach.” Rock Mech. Rock Eng. 46 (6): 1323–1338. https://doi.org/10.1007/s00603-013-0371-1.
Esterhuizen, G., and C. Karacan. 2007. “A methodology for determining gob permeability distributions and its application to reservoir modeling of coal mine longwalls.” In Proceedings of the SME Annual Meeting and Exhibition. Denver, CO: National Institute for Occupational Safety and Health.
Gao, F., D. Stead, and J. Coggan. 2014. “Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approach.” Comput. Geotech. 55: 448–460. https://doi.org/10.1016/j.compgeo.2013.09.020.
Hao, X., W. Fan, Z. Shan, and P. Liu. 2015. “An integrated approach for the prediction of underground-induced strata movement over longwall coal mining panels.” Geotech. Geol. Eng. 33 (3): 681–692. https://doi.org/10.1007/s10706-015-9850-3.
Hartman, H. L., and J. M. Mutmansky. 2002. Introductory mining engineering. Hoboken, NJ: Wiley.
Hosseini, N., K. Goshtasbi, B. Oraee-Mirzamani, and M. Gholinejad. 2014. “Calculation of periodic roof weighting interval in longwall mining using finite element method.” Arabian J. Geosci. 7 (5): 1951–1956. https://doi.org/10.1007/s12517-013-0859-8.
IRASCO, IRITEC, and Cementation SKANSKA. 2005. Basic Design Report. Vol. 2 to 5. Parvadeh, Tabas Coal Mine Project, Iran.
Itasca Consulting Group. 2008. PFC3D-Particle flow code in three dimensions. Ver. 4.0 User’s Manual. Minneapolis: Itasca Consulting Group.
Itasca Consulting Group. 2010. PFC2D-Particle flow code in two dimensions. Ver. 4.0 User’s Manual. Minneapolis: Itasca Consulting Group.
Ivars, D. M., M. E. Pierce, C. Darcel, J. Reyes-Montes, D. O. Potyondy, R. P. Young, and P. A. Cundall. 2011. “The synthetic rock mass approach for jointed rock mass modelling.” Int. J. Rock Mech. Min. Sci. 48 (2): 219–244. https://doi.org/10.1016/j.ijrmms.2010.11.014.
Jabinpoor, A., A. Jafari, and M. Y. Shahreza. 2013. “Estimation of rock cavability in jointed roof in longwall mining.” In Proc., Coal 2013: Coal Operators’ Conf., edited by N. Aziz, 68–73. Wollongong, Australia: Univ. of Wollongong.
Kuznetsov, S. T., D. G. Pekarskii, and V. T. Korovin. 1973. “Determining the normal stresses in a uniform bent cantilever.” Sov. Min. Sci. 9 (5): 478–482. https://doi.org/10.1007/BF02501373.
Kwasniewski, M. 2008. “Numerical analysis of strata behavior in the vicinity of a longwall panel in a coal seam mined with roof caving.” In Continuum and Distinct Element Numerical Modelling in Geo-Engineering. Minneapolis, MN: Itasca Consulting Group.
Lorig, L. J. 2007. “Using numbers from geology.” In Proc., 11th ISRM Congress. Lisbon, Portugal: International Society for Rock Mechanics and Rock Engineering, ISRM-11CONGRESS-2007-289.
Manteghi, H., K. Shahriar, and R. Torabi. 2012. “Numerical modelling for estimation of first weighting distance in longwall coal mining-A case study.” In Proc., 12th Coal Operators’ Conference, 60–68. Wollongong, Australia: University of Wollongong & Australasian Institute of Mining and Metallurgy.
Medhurst, T., R. Rankine, and M. Kelly. 2014. “Development of a method for a longwall top coal caveability assessment.” In Proc., Coal 2014: Coal Operators’ Conf., edited by N. Aziz and B. Kininmonth, 42–50. Wollongong, Australia: Univ of Wollongong.
Mohammadi, S., M. Ataei, R. Kakaie, and A. Mirzaghorbanali. 2019. “A new Roof Strata Cavability Index (RSCi) for longwall mining incorporating new rating system.” Geotech. Geol. Eng. 37 (5): 3619–3636. https://doi.org/10.1007/s10706-019-00857-6.
Mukherjee, S. N. 2003. “Mechanised longwall mining in India–a status review.” J. Inst. Eng. 81: 5–10.
Noroozi, A., K. Oraee, M. Javadi, K. Goshtasbi, and H. Khodadady. 2012. “A model for determining the breaking characteristics of immediate roof in longwall mines.” Yerbilimleri Dergisi. 33 (2): 193–203.
Obert, L., and W. I. Duvall. 1976. Rock mechanics and the design of structures in rock. Hoboken, NJ: Wiley.
Palchik, V. 2015. “Bulking factors and extents of caved zones in weathered overburden of shallow abandoned underground workings.” Int. J. Rock Mech. Min. Sci. 79: 227–240. https://doi.org/10.1016/j.ijrmms.2015.07.005.
Peng, S. S. 1987. “Support capacity and roof behaviour at longwall faces with shield supports.” Int. J. Min. Geol. Eng. 5 (1): 29–57. https://doi.org/10.1007/BF01553531.
Peng, S. S. 2008. Coal mine ground control. 3rd ed. Morgantown, WV: West Virginia Univ.
Peng, S. S. 2020. Longwall mining. 3rd ed., 181–215. Boca Raton, FL: CRC Press/Balkema, Taylor & Francis Group.
Peng, S. S., and H. S. Chiang. 1984. Longwall mining. New York: Wiley.
Pierce, M., P. Cundall, D. Potyondy, and D. M. Ivars. 2007. “A synthetic rock mass model for jointed rock.” In Proc., First CA-US Rock Mechanics Symp., 341–349. Vancouver, BC: American Rock Mechanics Association.
Potyondy, D. O., and P. A. Cundall. 2004. “A bonded-particle model for rock.” Int. J. Rock Mech. Min. Sci. 41 (8): 1329–1364. https://doi.org/10.1016/j.ijrmms.2004.09.011.
Rafiee, R., M. Ataei, R. KhalooKakaie, S. E. Jalali, F. Sereshki, and M. Noroozi. 2018. “Numerical modeling of influence parameters in cavabililty of rock mass in block caving mines.” Int. J. Rock Mech. Min. Sci. 105: 22–27. https://doi.org/10.1016/j.ijrmms.2018.03.001.
Sainsbury, F., and G. P. Lomonossoff. 2008. “Extremely high-level and rapid transient protein production in plants without the use of viral replication.” Plant Physiol. 148 (3): 1212–1218. https://doi.org/10.1104/pp.108.126284.
Sarkar, S. K. 1998. Mechanised longwall mining: the Indian experiences. New Delhi, India: Oxford & IBH Publishing.
Shabanimashcool, M., L. Jing, and C. C. Li. 2014. “Discontinuous modelling of stratum cave-in in a longwall coal mine in the arctic area.” Geotech. Geol. Eng. 32 (5): 1239–1252. https://doi.org/10.1007/s10706-014-9795-y.
Shahriar, K., S. Amoushahi, and M. Arabzadeh. 2009. “Prediction of surface subsidence due to inclined very shallow coal seam mining using FDM.” In Proc., Coal 2009: Coal Operators’ Conf., edited by N. Aziz, 130–139. Wollongong, Australia: Univ. of Wollongong.
Siamaki, A., K. Esmaeili, and B. Mohanty. 2018. “Degradation of a discrete infilled joint shear strength subjected to repeated blast-induced vibrations.” Int. J. Min. Sci. Tech. 28: 561–571. https://doi.org/10.1016/j.ijmst.2018.04.015.
Singh, G. S., and U. K. A. Singh. 2009. “Numerical modeling approach for assessment of progressive caving of strata and performance of hydraulic powered support in longwall workings.” Comput. Geotech. 36 (7): 1142–1156. https://doi.org/10.1016/j.compgeo.2009.05.001.
Singh, G. S., and U. K. Singh. 2010. “Prediction of caving behavior of strata and optimum rating of hydraulic powered support for longwall workings.” Int. J. Rock Mech. Min. Sci. 47 (1): 1–16. https://doi.org/10.1016/j.ijrmms.2009.09.001.
Singh, G. S. P., U. K. Singh, and G. Banerjee. 2004. “Cavability assessment model for longwall working in India.” In Proc., 3rd Asian Rock Mechanics Symp., 295–300. Kyoto, Japan: International Society for Rock Mechanics.
Sofianos, A. I. 1996. “Analysis and design of an underground hard rock voussoir beam roof.” Int. J. Rock Mech. Min. Sci. Geomech. 33 (2): 153–166. https://doi.org/10.1016/0148-9062(95)00052-6.
TPCCO (Tabas Parvadeh Coal Company). 2021. Evaluation of reducing the pillar width between two adjacent panels in Tabas mechanized coal mine. Mine report of Tabas Parvadeh Coal Company (TPCCO). Tabas, Iran: TPCCO.
Unrug, K. D. A., and A. D. A. Szwilski. 1980. “Influence of strata control parameters on longwall mining design.” In Proc., 21st US Symp. on Rock Mechanics. Alexandria, VA: American Rock Mechanics Association. ARMA-80-0720.
Wang, G., M. Wu, R. Wang, H. Xu, and X. Song. 2017. “Height of the mining-induced fractured zone above a coal face.” Eng. Geol. 216: 140–152. https://doi.org/10.1016/j.enggeo.2016.11.024.
Wang, Z. Q., H. Yang, Y. B. Chang, and P. Wang. 2011. “Research on the height of caving zone and roof classification of mining whole height at one times in thick coal seam.” Appl. Mech Mater. 99: 207–212. https://doi.org/10.4028/www.scientific.net/AMM.99-100.207.
Wu, K., G. L. Cheng, and D. W. Zhou. 2015. “Experimental research on dynamic movement in strata overlying coal mines using similar material modeling.” Arabian J. Geosci. 8 (9): 6521–6534. https://doi.org/10.1007/s12517-014-1685-3.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 22 • Issue 5 • May 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Apr 20, 2021
Accepted: Dec 6, 2021
Published online: Mar 2, 2022
Published in print: May 1, 2022
Discussion open until: Aug 2, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Fang Yuan, Jianxin Tang, Lingrui Kong, Cheng Li, Layout timing of mining roadways considering goaf and roof stability, Frontiers in Earth Science, 10.3389/feart.2022.1092585, 10, (2023).
- Zeng Ding, Xiaojun Feng, Enyuan Wang, Qilei Wei, Xue Zhao, Qinjing Hu, Acoustic emission response and evolution of precracked coal in the meta-instability stage under graded loading, Engineering Geology, 10.1016/j.enggeo.2022.106930, 312, (106930), (2023).
- Vladimir Sergeevich Brigida, Vladimir Ivanovich Golik, Boris Vitalievich Dzeranov, Modeling of Coalmine Methane Flows to Estimate the Spacing of Primary Roof Breaks, Mining, 10.3390/mining2040045, 2, 4, (809-821), (2022).
- Hossein Arasteh, Gholamreza Saeedi, Mohammad Ali Ebrahimi Farsangi, Numerical Study of the Roof Fall and Out of Seam Dilution and Their Event Risk in a Mechanized Longwall Panel, Geotechnical and Geological Engineering, 10.1007/s10706-022-02317-0, (2022).