Development of Innovative Foundation Configuration for Tall Wind Turbines Inspired by Tree Root System
Publication: International Journal of Geomechanics
Volume 22, Issue 3
Abstract
This study presents a simplified analytical design and numerical modeling of the pile group foundation for a wind turbine tower on multilayered soil. The pile group foundation obtained from the analytical design is modified to study the possibility of developing an innovative foundation configuration through biomimicry of the tree root system. The initial dimensions of the pile group foundation were obtained from the analytical geotechnical design, which resulted in 40 closed-end steel pipe piles of length 30 m arranged along the circumferences with radii 5.3 and 6.7 m. The pile cap is considered to have a radius of 7.5 m and a thickness of 1.2 m. These dimensions were used to develop a three-dimensional numerical model of the pile group foundation in GROUP software. Inspired by the load-carrying mechanism of the natural foundation, i.e., tree root system, the initial model was modified by altering the inclination of the outer piles, which resulted in an additional ten models. The results from GROUP indicated that the differential settlement and rotation are the lowest for the model with outer piles inclined at an alternate 60° and 45° with the horizontal plane. Further, the pile configuration was modified by arranging the same number of piles along three circumferences keeping the length of the pile constant. This configuration was modified by changing the inclination of middle and outermost piles, which resulted in additional 14 models. These models were analyzed in GROUP, and the results showed that the lowest differential settlement and rotation are observed in the model with piles inclined at an angle of 90°/90°/60° (innermost/middle/outermost pile) and 90°/90°/45°. Moreover, the stress, axial force, shear force, and bending moment were obtained from GROUP for each configuration, which can be used to ensure the structural safety of the foundation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported in part by the Aniket Shrikhande Memorial Assistantship fund and Glenn Department of Civil Engineering of Clemson University. The financial support of the Shrikhande family and Clemson University is gratefully acknowledged.
References
ASCE. 2010. Minimum design loads for buildings and other structures. ASCE/SEI 7-10. Reston, VA: ASCE.
Dale, W. D., and O. G. Langdon. 1990. “Cabbage palmetto.” In Vol. 2 of Silvics of North America, edited by R. M. Burns and B. H. Honkala, 762–767. Hardwoods: USDA Agric Handb 654.
Duryea, M. L., and E. Kampf. 2017. Selecting coastal plain species for wind resistance. Gainesville, FL: IFAS Extension, Univ. of Florida.
Fellenius, B. H. 1999. Basics of foundation design. 2nd ed. Richmond, BC, Canada: BiTech Publishers.
Giannakou, A., N. Gerolymos, G. Gazetas, T. Tazoh, and I. Anastasopoulos. 2010. “Seismic behavior of batter piles: Elastic response.” J. Geotech. Geoenviron. Eng. 136 (9): 1187–1199. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000337.
Grunbeg, J., and J. Gohlmann. 2013. Concrete structures for wind turbines. Berlin: Wilhelm Ernst & Sohn.
Gudmundsdottir, B. 1981. “Laterally loaded piles.” M.S. thesis, Dept. of Civil Engineering, Univ. of Alberta.
Malhotra, S. 2011. Selection, design and construction of offshore wind turbine foundations, wind turbines. Edited by I. Al-Bahadly. London: InTech.
Reese, L. C., S. T. Wang, J. A. Arrellaga, J. Hendrix, and L. Vasquez. 2014. A program for the analysis of a group of piles subjected to vertical and lateral loading (user’s manual). Austin, TX: Ensoft, Inc.
Roa, K. N. S. V. 2011. Foundation design: Theory and practice. 1st ed. Singapore: Wiley.
Shrestha, S., and N. Ravichandran. 2020. “An effort to develop a novel foundation through biomimicry using 3D finite element modeling.” In Geo-Congress 2020: Foundations, Soil Improvement, and Erosion, Geotechnical Special Publication 315, edited by J. P. Hambleton, R. Makhnenko, and A. S. Budge. Reston, VA: ASCE.
WPC, A Terracon Company. 2010. Geotechnical engineering report: Clemson wind turbine testing facility North Charleston, South Carolina. WPC Project No. EN105060. North Charleston, SC: WPC.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 20, 2021
Accepted: Oct 28, 2021
Published online: Dec 20, 2021
Published in print: Mar 1, 2022
Discussion open until: May 20, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.