Novel Model for Limit-Equilibrium Analysis of Slope Stability with a Nonlinear Strength Criterion
Publication: International Journal of Geomechanics
Volume 21, Issue 9
Abstract
Slope stability has always been a concern of the geotechnical engineering community, and geotechnical scholars have continued to explore the reasonable failure mechanism of slopes and make the theoretical models of slope stability more reliable. This work established a novel model for limit-equilibrium (LE) analysis of slope stability with a nonlinear strength criterion. In this theoretical model, the thrust line of interslice force and corresponding increment are reasonably simplified. Then, the formula of normal stress on slip surface is derived by assuming the increment of normal interslice force. Meanwhile, strength reduction technology is applied to reduce the shear strength of the geotechnical body on the slip surface with slope factor of safety (FOS) to obtain shear stress on the slip surface. Thereafter, mechanical equilibrium conditions satisfied by the whole slope sliding body and newly introduced equation about increments of interslice force are used to solve LE stability of the slope. For stability analysis of a slope with a nonlinear strength criterion via a simple and feasible calculation process, an iterative loop solution strategy is adopted in the analysis. After comparison and analysis of several slope examples, the feasibility and rationality of the present method are verified. Moreover, the present method has high efficiency in terms of calculation speed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the National Natural Science Foundation of China (Grant No. 51608541) and the Natural Science Foundation of Hunan Province, China (Grant No. 2019JJ50772).
References
Chen, Z. Y., H. L. Mi, F. M. Zhang, and X. G. Wang. 2003. “A simplified method for 3D slope stability analysis.” Can. Geotech. J. 40 (3): 675–683. https://doi.org/10.1139/t03-002.
Deng, D. P., L. Li, and L. H. Zhao. 2017. “Method of generation and model of calculation of arbitrary curved slip surfaces for three-dimensional convex and concave slopes.” Int. J. Geomech. 17 (11): 04017095. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001000.
Deng, D. P., L. H. Zhao, and L. Li. 2015. “Limit equilibrium slope stability analysis using the nonlinear strength failure criterion.” Can. Geotech. J. 52 (5): 563–576. https://doi.org/10.1139/cgj-2014-0111.
Drescher, A., and C. Christopoulos. 1988. “Limit analysis slope stability with nonlinear yield condition.” Int. J. Numer. Anal. Methods Geomech. 12 (3): 341–345. https://doi.org/10.1002/nag.1610120307.
Gao, Y. F., D. Wu, and F. Zhang. 2015. “Effects of nonlinear failure criterion on the three-dimensional stability analysis of uniform slopes.” Eng. Geol. 198: 87–93. https://doi.org/10.1016/j.enggeo.2015.09.010.
Griffiths, D. V., and P. A. Lane. 1999. “Slope stability analysis by finite elements.” Géotechnique 49 (3): 387–403. https://doi.org/10.1680/geot.1999.49.3.387.
Janbu, N. 1973. “Slope stability computations.” In Embankment dam engineering: Casagrande memorial volume, edited by E. Hirschfield and S. Poulos, 47–86. New York: Wiley.
Jiang, J. C., R. Baker, and T. Yamagami. 2003. “The effect of strength envelope nonlinearity on slope stability computations.” Can. Geotech. J. 40 (2): 308–325. https://doi.org/10.1139/t02-111.
Krahn, J. 2003. “The 2001 R.M. Hardy lecture: The limits of limit equilibrium analyses.” Can. Geotech. J. 40 (3): 643–660. https://doi.org/10.1139/t03-024.
Kumar, S., and P. K. Basudhar. 2018. “A neural network model for slope stability computations.” Géotech. Lett. 8 (2): 149–154. https://doi.org/10.1680/jgele.18.00022.
Li, L., Y. Wang, L. M. Zhang, C. Choi, and C. W. W. Ng. 2019. “Evaluation of critical slip surface in limit equilibrium analysis of slope stability by smoothed particle hydrodynamics.” Int. J. Geomech. 19 (5): 04019032. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001391.
Liu, S. Y., L. T. Shao, and H. J. Li. 2015. “Slope stability analysis using the limit equilibrium method and two finite element methods.” Comput. Geotech. 63 (1): 291–298. https://doi.org/10.1016/j.compgeo.2014.10.008.
Liu, S. Y., Z. N. Su, M. Li, and L. T. Shao. 2020a. “Slope stability analysis using elastic finite element stress fields.” Eng. Geol. 273: 105673. https://doi.org/10.1016/j.enggeo.2020.105673.
Liu, X., D. Q. Li, Z. J. Cao, and Y. Wang. 2020b. “Adaptive Monte Carlo simulation method for system reliability analysis of slope stability based on limit equilibrium methods.” Eng. Geol. 264: 105384. https://doi.org/10.1016/j.enggeo.2019.105384.
Morgenstern, N. R., and V. E. Price. 1965. “The analysis of the stability of general slip surfaces.” Géotechnique 15 (1): 79–93. https://doi.org/10.1680/geot.1965.15.1.79.
Nitzsche, K., and I. Herle. 2020. “Strain-dependent slope stability.” Acta Geotech. 15: 3111–3119. https://doi.org/10.1007/s11440-020- 00971-3.
Rocscience Inc. 2003. Slide verification manual. Toronto: Rocscience Inc.
Stianson, J. R., D. G. Fredlund, and D. Chan. 2011. “Three-dimensional slope stability based on stresses from a stress-deformation analysis.” Can. Geotech. J. 48 (6): 891–904. https://doi.org/10.1139/t11-006.
Stolle, D., and P. J. Guo. 2008. “Limit equilibrium slope stability analysis using rigid finite elements.” Can. Geotech. J. 45 (5): 653–662. https://doi.org/10.1139/T08-010.
Su, A. J., Z. X. Zou, Z. C. Lu, and J. G. Wang. 2018. “The inclination of the interslice resultant force in the limit equilibrium slope stability analysis.” Eng. Geol. 240: 140–148. https://doi.org/10.1016/j.enggeo.2018.04.016.
Wang, X. G., X. C. Lin, X. Li, P. Sun, and Y. Y. Ling. 2020. “3D slope stability analysis method based on Pan’s maximum principle.” Landslides 17 (5): 1163–1176. https://doi.org/10.1007/s10346-019-01303-7.
Xiao, S. G., W. D. Guo, and J. X. Zeng. 2018. “Factor of safety of slope stability from deformation energy.” Can. Geotech. J. 55 (2): 296–302. https://doi.org/10.1139/cgj-2016-0527.
Xu, W. J., S. Wang, and M. Bilal. 2020. “LEM-DEM coupling for slope stability analysis.” Sci. China Technol. Sci. 63 (2): 329–340. https://doi.org/10.1007/s11431-018-9387-2.
Yang, X. G., and S. C. Chi. 2013. “Upper bound finite element analysis of slope stability using a nonlinear failure criterion.” Comput. Geotech. 54: 185–191. https://doi.org/10.1016/j.compgeo.2013.06.007.
Yang, X. L., and J. H. Yin. 2004. “Slope stability analysis with nonlinear failure criterion.” J. Eng. Mech. 130 (3): 267–273. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:3(267).
Yu, G., M. W. Xie, J. Liang, A. Farooq, and E. J. Williams. 2020. “A GIS-based 3D slope stability analysis method based on the assumed normal stress on the slip surface.” Sci. Rep. 10 (1): 4442. https://doi.org/10.1038/s41598-020-61301-x.
Zhang, X. J., and W. F. Chen. 1987. “Stability analysis of slopes with general nonlinear failure criterion.” Int. J. Numer. Anal. Methods Geomech. 11 (1): 33–50. https://doi.org/10.1002/nag.1610110104.
Zhao, L. H., L. Li, F. Yang, Q. Luo, and X. Liu. 2010. “Upper bound analysis of slope stability with nonlinear failure criterion based on strength reduction technique.” J. Cent. South Univ. Technol. 17 (4): 836–844. https://doi.org/10.1007/s11771-010-564-7.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 27, 2020
Accepted: May 7, 2021
Published online: Jun 21, 2021
Published in print: Sep 1, 2021
Discussion open until: Nov 21, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Qi Xie, Yuxin Jie, Yifei Cui, Changyun Yin, Generating Slip Surfaces Using the Logistic Function Integral, International Journal of Geomechanics, 10.1061/IJGNAI.GMENG-7972, 23, 5, (2023).
- Yaxi Shen, Shunchuan Wu, Haiyong Cheng, Huajin Zhang, Jiaxin Wang, Zhiquan Yang, Huaming An, Xiong Song, Uncertainty analysis method of slope safety factor based on quantile-based ensemble learning, Bulletin of Engineering Geology and the Environment, 10.1007/s10064-023-03091-w, 82, 3, (2023).
- Dongping Deng, Haoyu Chen, Shasha Wen, Yihang Peng, Hengxin Fan, A Novel Global Stress Method for the Limit-Equilibrium Analysis of Slope Stability Considering Stress Constraint Conditions at Ends, International Journal of Geomechanics, 10.1061/(ASCE)GM.1943-5622.0002575, 22, 11, (2022).