Three-Dimensional Creep Constitutive Model of Transversely Isotropic Rock
Publication: International Journal of Geomechanics
Volume 21, Issue 8
Abstract
Transversely isotropic rock is a typical anisotropic rock type. The existing creep constitutive models for isotropic rock do not fully reflect the creep mechanical properties of transversely isotropic rock. By considering a set of creep parameters as the internal connection among the rock specimens with different bedding directions, a three-dimensional creep constitutive equation of transversely isotropic rock is derived, which can effectively describe the characteristics of the instantaneous strain, decaying creep, and steady creep of a transversely isotropic rock. A method to determine the creep parameters for the three-dimensional creep constitutive model is proposed. Based on the creep test experimental data of horizontally orientated and vertically orientated phyllite, the transversely isotropic creep properties and creep parameters are successfully identified using the proposed method. The rationality and validity of the new model are certified by comparing the theoretical curves with experimental data. The results of this paper provide a new approach to study the three-dimensional creep mechanisms of rock and provide scientific research support for the design of rock creep tests.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The study was supported by the National Key R&D Program of China (2017YFC1501103), the National Natural Science Foundation of China (51779095), the Science Technology Innovation Talents in Universities of Henan Province (20HASTIT013), the Youth Fund of China Natural Science Foundation (51709193), Sichuan University, and State Key Lab Hydraulics & Mountain River Engineering (SKHL2007).
References
Aravas, N., C. Cheng, and P. P. Castaneda. 1995. “Steady-state creep of fiber-reinforced composites: Constitutive equations and computational issues.” Int. J. Solids Struct. 32 (15): 2219–2244. https://doi.org/10.1016/0020-7683(94)00251-Q.
Berman, I., and D. H. Pai. 1966. “A theory of anisotropic steady-state creep.” Int. J. Mech. Sci. 8 (5): 341–352. https://doi.org/10.1016/0020-7403(66)90007-5.
Betten, J. 2008. Creep mechanics. 3rd ed. Berlin: Springer.
Boukharov, G. N., M. W. Chanda, and N. G. Boukharov. 1995. “The three processes of brittle crystalline rock creep.” Int. J. Rock Mech. Min. Sci. Geomech. Abst. 32 (4): 325–335. https://doi.org/10.1016/0148-9062(94)00048-8.
Cho, J. W., H. Kim, S. Jeon, and K. B. Min. 2012. “Deformation and strength anisotropy of Asan gneiss, Boryeong shale, and Yeoncheon schist.” Int. J. Rock Mech. Min. Sci. 50: 158–169. https://doi.org/10.1016/j.ijrmms.2011.12.004.
Gonzaga, G. G., M. H. Leite, and R. Corthésy. 2008. “Determination of anisotropic deformability parameters from a single standard rock specimen.” Int. J. Rock Mech. Min. Sci. 45 (8): 1420–1438. https://doi.org/10.1016/j.ijrmms.2008.01.014.
Johnson, A. F. 1977. “Creep characterization of transversely-isotropic metallic materials.” J. Mech. Phys. Solids 25 (2): 117–126. https://doi.org/10.1016/0022-5096(77)90007-2.
Koeller, R. C. 1984. “Applications of fractional calculus to the theory of viscoelasticity.” J. Appl. Mech. 51 (2): 299–307. https://doi.org/10.1115/1.3167616.
Lekhnitskij, S. G. 1977. Theory of the elasticity of anisotropic bodies. Moscow: Nauka Glavnaya Red Fiziko-Matem Liter.
Lemaitre, J., and J. Chaboche. 1994. Mechanics of solid materials. Cambridge, UK: Cambridge University Press.
Li, C. B., P. B. Zdeněk, H. P. Xie, and R. A. Saeed. 2019. “Anisotropic microplane constitutive model for coupling creep and damage in layered geomaterials such as gas or oil shale.” Int. J. Rock Mech. Min. Sci. 124: 104074. https://doi.org/10.1016/j.ijrmms.2019.104074.
Liboutry, L. 1993. “Anisotropic, transversely isotropic nonlinear viscosity of rock ice and rheological parameters inferred from homogenization.” Int. J. Plast. 9 (5): 619–632. https://doi.org/10.1016/0749-6419(93)90023-J.
Liu, H. Z., H. Q. Xie, J. D. He, M. L. Xiao, and L. Zhuo. 2017. “Nonlinear creep damage constitutive model for soft rocks.” Mech. Time-Depend. Mater. 21 (1): 73–96. https://doi.org/10.1007/s11043-016-9319-7.
Park, K. H., Y. H. Jung, and C. K. Chung. 2017. “Evolution of stiffness anisotropy during creep of engineered silty sand in South Korea.” KSCE J. Civ. Eng. 21 (6): 2168–2176. https://doi.org/10.1007/s12205-016-1105-1.
Robinson, D. N. 1984. “Constitutive relationships for anisotropic high-temperature alloys.” Nucl. Eng. Des. 83 (3): 389–396. https://doi.org/10.1016/0029-5493(84)90131-6.
Saint-Venant, B. 1863. “Sur la distribution des élasticiteés autour de chaque point d’un solide ou d’un milieu de contexture quelconque, particulièrement lorsqu’il est amorphe sans être isotrope.” J. Math. Pures Appl. 7 (8): 353–430.
Talesnick, M. L., and M. Ringel. 1999. “Completing the hollow cylinder methodology for testing of transversely isotropic rocks: Torsion testing.” Int. J. Rock Mech. Min. Sci. 36 (5): 627–639. https://doi.org/10.1016/S0148-9062(99)00038-8.
Verstrynge, E., L. Schueremans, and D. V. Gemert. 2011. “Time-dependent mechanical behavior of lime-mortar masonry.” Mater. Struct. 44 (1): 29–42. https://doi.org/10.1617/s11527-010-9606-8.
Voyiadjis, G. Z., and A. Zolochevsky. 1998. “Modeling of secondary creep behavior for anisotropic materials with different properties in tension and compression.” Int. J. Plast. 14 (10–11): 1059–1083. https://doi.org/10.1016/S0749-6419(98)00045-X.
Waniewski, M. 1985. “A simple law of steady-state creep for material with anistropy introduced by plastic prestraining.” Ing. Arch. 55 (5): 368–375. https://doi.org/10.1007/BF00532573.
Welch, S. W. J., R. A. L. Rorrer, and J. R. Duren, Jr. 1999. “Duren. application of time-based fractional calculus methods to viscoelastic creep and stress relaxation of materials.” Mech. Time-Depend. Mater. 3 (3): 279–303. https://doi.org/10.1023/A:1009834317545.
Zhou, H. W., C. P. Wang, B. B. Han, and Z. Q. Duan. 2011. “A creep constitutive model for salt rock based on fractional derivatives.” Int. J. Rock Mech. Min. Sci. 48 (1): 116–121. https://doi.org/10.1016/j.ijrmms.2010.11.004.
Zhou, H. W., C. P. Wang, L. J. Mishnaevsky, Z. Q. Duan, and J. Y. Ding. 2013. “A fractional derivative approach to full creep regions in salt rock.” Mech. Time-Depend. Mater. 17 (3): 413–425. https://doi.org/10.1007/s11043-012-9193-x.
Zienkiewicz, O. C., M. Watson, and I. P. King. 1968. “A numerical method of visco-elastic stress analysis.” Int. J. Mech. Sci. 10 (10): 807–827. https://doi.org/10.1016/0020-7403(68)90022-2.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 18, 2020
Accepted: Mar 22, 2021
Published online: May 19, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 19, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Qiming Zhang, Enyuan Wang, Zeng Ding, Research on the Creep Model of Deep Coal Roadway and Its Numerical Simulation Reproduction, International Journal of Environmental Research and Public Health, 10.3390/ijerph192315920, 19, 23, (15920), (2022).
- Haopeng Jiang, Annan Jiang, Fengrui Zhang, Yunpeng Feng, Experimental investigation on the seepage characteristics and temperature–permeability (T–P) model of sandstone after different temperature treatments, Journal of Thermal Analysis and Calorimetry, 10.1007/s10973-022-11526-x, 147, 23, (13177-13189), (2022).
- Hao Kou, Chuan He, Wenbo Yang, Fangyin Wu, Zihan Zhou, Jianfeng Fu, Longge Xiao, A Fractional Nonlinear Creep Damage Model for Transversely Isotropic Rock, Rock Mechanics and Rock Engineering, 10.1007/s00603-022-03108-y, 56, 2, (831-846), (2022).