Triaxial Discrete Element Simulation of Soil–Rock Mixture with Different Rock Particle Shapes under Rigid and Flexible Loading Modes
Publication: International Journal of Geomechanics
Volume 21, Issue 8
Abstract
Three-dimensional scanning technology was used to construct the database of natural block stone shapes with different particle sizes. On the basis of Particle Flow Code 3D, a discrete element random model of soil–rock mixtures with different stone contents and shapes was established. A flexible boundary loading method of multisection wall was adopted to simulate the flexible film constraint mode of indoor triaxial test. Large-scale triaxial numerical simulation tests were carried out on the soil–rock mixture with different stone contents, stone shapes, and loading modes to analyze the macromechanics, microscopic deformation, and failure laws under various working conditions. Results showed that under the flexible loading mode, the stress curve of the samples with low stone content (0%–20%) has no obvious peak value and the deformation is mainly shear shrinkage. The stress curve of the samples with high stone content (40%–60%) showed the obvious peak value, and the dilatancy was prominent. Under the action of vertical load, the specimen bulged and formed multiple fork shear bands. Compared with the flexible loading mode, the rigid loading mode showed that the strength of the specimen increased in the rigid loading mode, and the cohesion and internal friction angle improved overall, but the friction energy was basically the same. During shearing, no obvious bulging was noted at the edge of the sample, and the shear bands were K-shaped and diagonal. The shape of block stone had significant influence on the strength, friction energy, and shear band shape of the soil–rock mixture.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support provided by the Natural Science Foundation of Xinjiang (Grant No. 2019D01B16) and the Xinjiang Huli Jiayuan Environmental Protection Technology Project (Grant No. HLJY2020KY0402B).
References
Alshibli, K. A., and S. Sture. 2000. “Shear band formation in plane strain experiments of sand.” J. Geotech. Geoenviron. Eng. 126 (6): 495–503. https://doi.org/10.1061/(ASCE)1090-0241(2000)126:6(495).
Chai, H. J., Z. L. Yan, and X. M. Jia. 2009. Construction technologies of soil and rock aggregate mixture embankment. Reading, MA: China Communications Press.
Ding, X. L., Y. X. Li, and X. Wang. 2010. “Particle flow modeling mechanical properties of soil and rock mixtures based on digital image.” Chin. J. Rock Mech. Eng. 29 (3): 477–484.
Dondi, G., A. Simone, V. Vignali, and G. Manganelli. 2012. “Numerical and experimental study of granular mixes for asphalts.” Powder Technol. 232 (4): 31–40. https://doi.org/10.1016/j.powtec.2012.07.057.
Dove, J. E., J. Wang, and M. S. Gutierrez. 2007. “Discrete-continuum analysis of shear banding in the direct shear test.” Géotechnique 57 (6): 513–526. https://doi.org/10.1680/geot.2007.57.6.513.
Du, X., Y. W. Zeng, R. Gao, and J. Yan. 2011. “3D modelling of irregular shape particles for discrete element method based on X-ray tomography.” J. Shanghai Jiaotong Univ. 45 (5): 711–715.
de Frias Lopez, R., J. Silfwerbrand, D. Jelagin, and B. Birgisson. 2016. “Force transmission and soil fabric of binary granular mixtures.” Géotechnique 66 (7): 578–583. https://doi.org/10.1680/jgeot.14.P.199.
Graziani, A., C. Rossini, and T. Rotonda. 2012. “Characterization and DEM modeling of shear zones at a large dam foundation.” Int. J. Geomech. 12 (6): 648–664. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000220.
Hu, C.-B., D.-S. Ling, S.-L. Gong, J.-S. Shi, C. Han, and Z.-F. Ding et al. 2018. “Formula for inclination angle of shear band based on soil state and microscopic characteristics in sands.” J. Zhejiang Univ. (Eng. Sci.) 52 (11): 2068–2076.
Jiang, H., and M. Xu. 2014. “Study of stress-path-dependent behavior of rockfills using discrete element method.” Eng. Mech. 31 (10): 151–157, 180.
Jin, L., Y. W. Ceng, and S. Zhang. 2017. “Large scale triaxial tests on effects of rock block proportion and shape on mechanical properties of cemented soil–rock mixture.” Rock Soil Mech. 38 (1): 141–149.
Jin, L., Y. W. Zeng, H. Li, and J. J. Li. 2015. “Numerical simulation of large-scale triaxial tests on soil–rock mixture based on DEM of irregularly shaped particles.” Chin. J. Geotech. Eng. 37 (5): 829–838.
Kong, L., and R. Peng. 2011. “Particle flow simulation of influence of particle shape on mechanical properties of quasi-sands.” Chin. J. Rock Mech. Eng. 30 (10): 2112–2119.
Lindquist, E. S. 1994. “The strength and deformation properties of mérlange.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of California.
Liu, J., and G. Jian. 2013. “Effect of rock content on the mechanical behaviors of the soil–rock mixtures.” In Proc., DEM6-Int. Conf. on DEMs.
Liu, Y. J., Z. Y. Yin, P. Y. Hicher, J. H. Wang, and X. H. Xia. 2013. “Macro and micro analysis for grading-dependent mechanical behavior of granular materials.” In Proc., 5th Biot Conf. on Poromechanics, 1082–1089.
Medley, E. W. 1994. “The engineering characterization of mélanges and similar block-in-matrix rocks (bimrocks).” Ph.D. thesis, Univ. of California.
Meng, X. Y., S. H. Li, and J. F. Zhang. 2004. “Study and manufacture of flexible boundary loading testing maching.” Chin. J. Rock Mech. Eng. 23 (10): 1760–1764.
Minh, N. H., and Y. P. Cheng. 2013. “A DEM investigation of the effect of particle-size distribution on one-dimensional compression.” Géotechnique 63 (1): 44–53. https://doi.org/10.1680/geot.10.P.058.
Ng, T. T., W. Zhou, and X. L. Chang. 2016. “Effect of particle shape and fine content on the behavior of binary mixture.” J. Eng. Mech. 143 (1): C4016008.
Payan, M., A. Khoshghalb, K. Senetakis, and N. Khalili. 2016. “Effect of particle shape and validity of Gmax models for sand: A critical review and a new expression.” Comput. Geotech. 72: 28–41. https://doi.org/10.1016/j.compgeo.2015.11.003.
Tamás, K., K. Ádám, and I. J. Jóri. 2016. “The evaluation of the parallel bond’s properties in DEM modeling of soils.” Period. Polytech. Mech. Eng. 60 (1): 21–31. https://doi.org/10.3311/PPme.8427.
Vallejo, L. E., and R. Mawby. 2000. “Porosity influence on the shear strength of granular material clay mixtures.” Eng. Geol. 58 (2): 125–136. https://doi.org/10.1016/S0013-7952(00)00051-X.
Wang, J. Y., W. G. Cao, Z. M. Jiang, and Z. P. Zhao. 2016. “Large-scale triaxial tests on deformation and mechanical behavior of soil–rock aggregate mixture under different stress paths.” Rock Soil Mech. 37 (2): 424–430.
Wang, S. Y., L. K. Zhang, G. X. Chen, and J. Yuan. 2021. “Parameter inversion and direct shear simulation of discrete element model of soil–rock mixture based on 3D scanning technology.” Mater. Rep. 35 (10): 679–695.
Wang, X. 2010. “Research on influence factors of mechanical characteristics and failure mechanism of soil–rock mixture.” M.S. thesis, Yangtze River Scientific Research Institute.
Xia, J. G., R. L. Hu, S. W. Qi, W. Gao, and H. Y. Sui. 2017. “Large-scale triaxial shear testing of soil rock mixtures containing oversized particles.” Chin. J. Rock Mech. Eng. 36 (8): 2031–2039.
Xu, W. J., R. L. Hu, Z. Q. Yue, and R. J. Tan. 2007. “Mesostructural character and numerical simulation of mechanical properties of soil–rock mixtures.” Chin. J. Rock Mech. Eng. 26 (2): 300–311.
Xu, W. J., H. Y. Zhang, Q. Xu, and Y. Z. Yu. 2014. “Numerical simulations of direct shear test with soil–rock mixture using discrete element method.” Chin. J. Comput. Mech. 31 (2): 228–234.
Xue, Y. D., Z. Q. Liu, and J. Wu. 2014. “Direct shear tests and PFC2D numerical simulation of colluvial mixture.” Rock Soil Mech. 35 (S2): 587–592.
Yang, B., J. Yang, Z. Chang, H. Y. Gan, and R. X. Song. 2010. “3-D granular simulation for compressibility of soil–aggregate mixture.” Rock Soil Mech. 31 (5): 1645–1650.
You, X. H. 2002. “Stochastic structural model of the earth–rock aggregate and its application.” Chin. J. Rock Mech. Eng. 21 (11): 1748–1752.
Zhang, Q., X.-G. Wang, Y.-F. Zhao, L.-P. Liu, X.-C. Lin, and C. Shi. 2018. “Particle flow modelling of deformation and failure mechanism of soil–rock mixture under different loading modes of confining pressure.” Chin. J. Geotech. Eng. 40 (11): 2051–2060.
Zhang, Q., X.-G. Wang, Y.-F. Zhao, J.-W. Zhou, Q.-X. Meng, and M. Zhou. 2019. “Discrete element simulation of large-scale triaxial tests of soil–rock mixture based on flexible loading of confining pressure.” Chin. J. Geotech. Eng. 41 (8): 1545–1554.
Zhou, J. 2015. “Macro-micro research on the influence of model dimension to soil behaviors in DEM tests.” Chin. J. Underground Space Eng. 11 (1): 84–88, 97.
Zhuang, L., Y. Nakata, U. G. Kim, and D. Kim. 2014. “Influence of relative density, particle shape, and stress path on the plane strain compression behavior of granular materials.” Acta Geotech. 9 (2): 241–255. https://doi.org/10.1007/s11440-013-0253-4.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 22, 2020
Accepted: Feb 28, 2021
Published online: May 26, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 26, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Yiwen Zeng, Xiusong Shi, Hao Xiong, Wenbo Chen, Xia Bian, Elastoplastic Modeling of Sandy Clays Based on Equivalent Void Ratio Concept, International Journal of Geomechanics, 10.1061/IJGNAI.GMENG-8603, 23, 8, (2023).
- Haibin Li, Canyang Cui, Jun Cai, Mingming Zhang, Yanping Sheng, Utilization of Steel Slag in Road Semi-Rigid Base: A Review, Coatings, 10.3390/coatings12070994, 12, 7, (994), (2022).
- Yongshuai Sun, Xuefeng Li, Guihe Wang, Influence of Stone Shape Factor on the Pull-Out Resistance of Geogrid in the Soil-Rock Mixture, Advances in Materials Science and Engineering, 10.1155/2022/4975059, 2022, (1-14), (2022).
- Lirong Wan, Jiantao Wang, Qingliang Zeng, Dejian Ma, Xuehui Yu, Zhaosheng Meng, Vibration Response Analysis of the Tail Beam of Hydraulic Support Impacted by Coal Gangue Particles with Different Shapes, ACS Omega, 10.1021/acsomega.1c06279, 7, 4, (3656-3670), (2022).
- Ruidong Li, Xiangyu Hu, Fan Chen, Xiang Wang, Hao Xiong, Hao Wu, A systematic framework for DEM study of realistic gravel-sand mixture from particle recognition to macro- and micro-mechanical analysis, Transportation Geotechnics, 10.1016/j.trgeo.2021.100693, 34, (100693), (2022).
- Shuyong Wang, Guoxin Chen, Lingkai Zhang, Parameter inversion and microscopic damage research on discrete element model of cement-stabilized steel slag based on 3D scanning technology, Journal of Hazardous Materials, 10.1016/j.jhazmat.2021.127402, 424, (127402), (2022).
- Le-xin Chen, Wei-yao Guo, Dong-xiao Zhang, Tong-bin Zhao, Experimental study on the influence of prefabricated fissure size on the directional propagation law of rock type-I crack, International Journal of Rock Mechanics and Mining Sciences, 10.1016/j.ijrmms.2022.105274, 160, (105274), (2022).