Determination of Critical Slope Face in c–ϕ Soil under Seismic Condition Using Method of Stress Characteristics
Publication: International Journal of Geomechanics
Volume 21, Issue 4
Abstract
This study proposes a plasticity-based approach to ensure the static and seismic stability of a finite soil slope supporting a uniformly distributed surcharge on the horizontal top surface. Most of the available investigations based on the limit equilibrium and the limit analysis method mainly rely on the assumed slip surface to determine the stability of a slope with a given geometry. The present analysis employs the method of stress characteristics coupled with the original pseudodynamic approach to trace the actual slip surface of a soil slope under the seismic condition. The results are presented in terms of the critical slope face (CSF) corresponding to a global factor of safety of 1.0. The obtained CSF can be used as a reference to determine the stability of slopes with different geometries. The current approach supersedes the available theories developed to analyze slopes by presenting a more general solution without assuming any predefined slip surface. The proposed idea is endorsed with a detailed parametric study that demonstrates the influence of various parameters such as cohesion and the angle of internal friction of soil, surcharge loading, and seismic wave properties on the stability of a finite slope. As a notable outcome, this investigation promotes a bilinear or concave slope face, which may be an efficient and economical alternative to the traditional linear slope face.
Get full access to this article
View all available purchase options and get full access to this article.
References
Annapareddy, V. S. R., A. Pain, and S. Sarkar. 2017. “Seismic translational failure analysis of MSW landfills using modified pseudo-dynamic approach.” Int. J. Geomech. 17 (10): 04017086. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000990.
Basha, B. M., and G. L. S. Babu. 2010. “Seismic rotational displacements of gravity walls by pseudo-dynamic method with curved rupture surface.” Int. J. Geomech. 10 (3): 93–105. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000037.
Basha, B. M., and G. L. S. Babu. 2011. “Seismic reliability assessment of internal stability of reinforced soil walls using the pseudo-dynamic method.” Geosynth. Int. 18 (5): 221–241. https://doi.org/10.1680/gein.2011.18.5.221.
Bellezza, I. 2014. “A new pseudo-dynamic approach for seismic active soil thrust.” Geotech. Geol. Eng. 32 (2): 561–576. https://doi.org/10.1007/s10706-014-9734-y.
Bellezza, I. 2015. “Seismic active earth pressure on walls using a new pseudo-dynamic approach.” Geotech. Geol. Eng. 33 (4): 795–812. https://doi.org/10.1007/s10706-015-9860-1.
Bishop, A. W. 1955. “The use of the slip circle in the stability analysis of slopes.” Géotechnique 5 (1): 7–17. https://doi.org/10.1680/geot.1955.5.1.7.
Chanda, N., S. Ghosh, and M. Pal. 2016. “Analysis of slope considering circular rupture surface.” Int. J. Geotech. Eng. 10 (3): 288–296. https://doi.org/10.1080/19386362.2016.1142270.
Chen, W. F. 1975. Limit analysis and soil plasticity. Amsterdam, Netherlands: Elsevier.
Chen, W. F., and X. L. Liu. 1990. Limit analysis in soil mechanics. Amsterdam, Netherlands: Elsevier.
Choudhury, D., S. Basu, and J. D. Bray. 2007. “Behaviour of slopes under static and seismic conditions by limit equilibrium method.” In Proc., of Geo-Denver 2007: New Peaks in Geotechnics. 1–10. Reston, VA: ASCE.
Choudhury, D., and S. S. Nimbalkar. 2005. “Seismic passive resistance by pseudo-dynamic method.” Géotechnique 55 (9): 699–702. https://doi.org/10.1680/geot.2005.55.9.699.
Conte, E., F. Silvestri, and A. Troncone. 2010. “Stability analysis of slopes in soils with strain-softening behaviour.” Comput. Geotech. 37 (5): 710–722. https://doi.org/10.1016/j.compgeo.2010.04.010.
Daddazio, R. P., M. M. Ettouney, and I. S. Sandler. 1987. “Non-linear dynamic slope stability analysis.” J. Geotech. Eng. 113 (4): 285–298. https://doi.org/10.1061/(ASCE)0733-9410(1987)113:4(285).
Das, B. M. 1993. Principles of soil dynamics. Boston: PWS-KENT.
Fang, H. W., Y. F. Chen, and Y. X. Xu. 2020. “New instability criterion for stability analysis of homogeneous slopes.” Int. J. Geomech. 20 (5): 04020034. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001665.
Ghosh, P. 2008. “Seismic active earth pressure behind a nonvertical retaining wall using pseudo-dynamic analysis.” Can. Geotech. J. 45 (1): 117–123. https://doi.org/10.1139/T07-071.
Ghosh, P., and S. Kolathayar. 2011. “Seismic passive earth pressure behind non vertical wall with composite failure mechanism: Pseudo-dynamic approach.” Geotech. Geol. Eng. 29 (3): 363–373. https://doi.org/10.1007/s10706-010-9382-9.
Ghosh, S., and A. Saha. 2014. “Nonlinear failure surface and pseudodynamic passive resistance of a batter-faced retaining wall supporting c-Φ backfill.” Int. J. Geomech. 14 (3): 04014010. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000346.
Gray, D. 2013. “Influence of slope morphology on the stability of earthen slopes.” In Proc., of Geo-Congress 2013: Stability and Performance of Slopes and Embankments, 1902–1911. Reston, VA: ASCE.
Griffiths, D. V., and P. A. Lane. 1999. “Slope stability analysis by finite elements.” Géotechnique 49 (3): 387–403. https://doi.org/10.1680/geot.1999.49.3.387.
Hou, C., T. Zhang, Z. Sun, D. Dias, and M. Shang. 2019. “Seismic analysis of nonhomogeneous slopes with cracks using a discretization kinematic approach.” Int. J. Geomech. 19 (9): 04019104. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001487.
Janbu, N. 1954. “Application of composite slip surfaces for stability analysis.” In Proc., of European Conf. on Stability of Earth Slopes, 43–49. London, UK: International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE).
Jeldes, I. A., E. C. Drumm, and D. C. Yoder. 2015b. “Design of stable concave slopes for reduced sediment delivery.” J. Geotech. Geoenviron. Eng. 141 (2): 04014093. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001211.
Jeldes, I. A., N. E. Vence, and E. C. Drumm. 2015a. “Approximate solution to the Sokolovskiĭ concave slope at limiting equilibrium.” Int. J. Geomech. 15 (2): 04014049. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000330.
Keshavarz, A., and J. Kumar. 2017. “Bearing capacity computation for a ring foundation using the stress characteristics method.” Comput. Geotech. 89: 33–42. https://doi.org/10.1016/j.compgeo.2017.04.006.
Khosravi, M., and M. Khabbazian. 2012. “Presentation of critical failure surface of slopes based on the finite element technique.” In Proc., Geo-Congress 2012: State of the Art and Practice in Geotechnical Engineering, 536–545. Reston, VA: ASCE.
Khosravi, M., D. Leshchinsky, C. L. Meehan, and A. Khosravi. 2013. “Stability analysis of seismically loaded slopes using finite element techniques.” In Proc., Geo-Congress 2013: Stability and Performance of Slopes and Embankments, 1310–1319. Reston, VA: ASCE.
Kolathayar, S., and P. Ghosh. 2009. “Seismic active earth pressure on walls with bilinear backface using pseudo-dynamic approach.” Comput. Geotech. 36 (7): 1229–1236. https://doi.org/10.1016/j.compgeo.2009.05.015.
Kumar, J., and P. Ghosh. 2005. “Bearing capacity factor Nγ for ring footings using the method of characteristics.” Can. Geotech. J. 42 (5): 1474–1484. https://doi.org/10.1139/t05-051.
Kumar, J., and P. Ghosh. 2007. “Ultimate bearing capacity of two interfering rough strip footings.” Int. J. Geomech. 7 (1): 53–62. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:1(53).
Kumar, J., and V. B. K. Mohan Rao. 2003. “Seismic bearing capacity of foundations on slopes.” Géotechnique 53 (3): 347–361. https://doi.org/10.1680/geot.2003.53.3.347.
Leshchinsky, D., S. Ebrahimi, F. Vahedifard, and F. Zhu. 2012. “Extension of Mononobe–Okabe approach to unstable slopes.” Soils Found. 52 (2): 239–256. https://doi.org/10.1016/j.sandf.2012.02.004.
Leshchinsky, D., and K.-C. San. 1994. “Pseudostatic seismic stability of slopes: Design charts.” J. Geotech. Eng. 120 (9): 1514–1532. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:9(1514).
Li, X. 2007. “Finite element analysis of slope stability using a non-linear failure criterion.” Comput. Geotech. 34 (3): 127–136. https://doi.org/10.1016/j.compgeo.2006.11.005.
Lin, M.-L., and K.-L. Wang. 2006. “Seismic slope behavior in a large-scale shaking table model test.” Eng. Geol. 86 (2–3): 118–133. https://doi.org/10.1016/j.enggeo.2006.02.011.
Loukidis, D., P. Bandini, and R. Salgado. 2003. “Stability of seismically loaded slopes using limit analysis.” Géotechnique 53 (5): 463–479. https://doi.org/10.1680/geot.2003.53.5.463.
Michalowski, R. L. 1989. “Three-dimensional analysis of locally loaded slopes.” Géotechnique 39 (1): 27–38. https://doi.org/10.1680/geot.1989.39.1.27.
Michalowski, R. L. 1995. “Slope stability analysis: A kinematical approach.” Géotechnique 45 (2): 283–293. https://doi.org/10.1680/geot.1995.45.2.283.
Michalowski, R. L. 2002. “Stability charts for uniform slopes.” J. Geotech. Geoenviron. Eng. 128 (4): 351–355. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:4(351).
Mononobe, N., and H. Matsuo. 1929. “On the determination of earth pressures during earthquake.” In Vol. 9 Proc., World Eng. Conf., 177–185. Tokyo, Japan: Np.
Nimbalkar, S., V. S. R. Annapareddy, and A. Pain. 2018. “A simplified approach to assess seismic stability of tailings dams.” J. Rock Mech. Geotech. Eng. 10 (6): 1082–1090. https://doi.org/10.1016/j.jrmge.2018.06.003.
Nimbalkar, S. S., D. Choudhury, and J. N. Mandal. 2006. “Seismic stability of reinforced-soil wall by pseudo-dynamic method.” Geosynth. Int. 13 (3): 111–119. https://doi.org/10.1680/gein.2006.13.3.111.
Okabe, S. 1926. “General theory of earth pressures.” J. Jpn. Soc. Civ. Eng. 12 (6): 1277–1323.
Pain, A., V. S. R. Annapareddy, and S. Nimbalkar. 2018. “Seismic active thrust on rigid retaining wall using strain dependent dynamic properties.” Int. J. Geomech. 18 (12): 06018034. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001331.
Pain, A., D. Choudhury, and S. K. Bhattacharyya. 2016. “Seismic uplift capacity of horizontal strip anchors using a modified pseudodynamic approach.” Int. J. Geomech. 16 (1): 04015025. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000471.
Pain, A., D. Choudhury, and S. K. Bhattacharyya. 2017. “Seismic rotational stability of gravity retaining walls by modified pseudo-dynamic method.” Soil Dyn. Earthquake Eng. 94: 244–253. https://doi.org/10.1016/j.soildyn.2017.01.016.
Qin, C. B., and S. C. Chian. 2018a. “New perspective on seismic slope stability analysis.” Int. J. Geomech. 18 (7): 06018013. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001170.
Qin, C.-B., and S. C. Chian. 2018b. “Kinematic analysis of seismic slope stability with a discretisation technique and pseudo-dynamic approach: A new perspective.” Géotechnique 68 (6): 492–503. https://doi.org/10.1680/jgeot.16.P.200.
Qin, C. B., and S. C. Chian. 2019. “Impact of earthquake characteristics on seismic slope stability using modified pseudodynamic method.” Int. J. Geomech. 19 (9): 04019106. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001489.
Rajesh, B. G., and D. Choudhury. 2017. “Stability of seawalls using modified pseudo-dynamic method under earthquake conditions.” Appl. Ocean Res. 65: 154–165. https://doi.org/10.1016/j.apor.2017.04.004.
Renani, H. R., and C. D. Martin. 2020. “Factor of safety of strain-softening slopes.” J. Rock Mech. Geotech. Eng. 12 (3): 473–483. https://doi.org/10.1016/j.jrmge.2019.11.004.
Sahoo, P. P., and S. K. Shukla. 2019. “Taylor’s slope stability chart for combined effects of horizontal and vertical seismic coefficients.” Géotechnique 69 (4): 344–354. https://doi.org/10.1680/jgeot.17.P.222.
Santhoshkumar, G., and P. Ghosh. 2018. “Seismic passive earth pressure on an inclined cantilever retaining wall using method of stress characteristics—A new approach.” Soil Dyn. Earthquake Eng. 107: 77–82. https://doi.org/10.1016/j.soildyn.2018.01.021.
Santhoshkumar, G., and P. Ghosh. 2019. “Closed-form solution for seismic earth pressure on bilinear retaining wall using method of characteristics.” J. Earthquake Eng. 1–20. https://doi.org/10.1080/13632469.2019.1570880.
Santhoshkumar, G., P. Ghosh, and A. Murakami. 2019. “Seismic active resistance of a tilted cantilever retaining wall considering adaptive failure mechanism.” Int. J. Geomech. 19 (8): 04019086. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001470.
Schor, H. J., and D. H. Gray. 2007. Landforming: An environmental approach to hillside development, mine reclamation and watershed restoration. Hoboken, NJ: Wiley.
Sharma, M., D. Choudhury, M. Samanta, S. Sarkar, and V. S. R. Annapareddy. 2020. “Analysis of helical soil nailed walls under static and seismic conditions.” Can. Geotech. J. 57 (6): 815–827. https://doi.org/10.1139/cgj-2019-0240.
Sokolovski, V. V. 1960. Statics of soil media. London: Butterworths.
Spencer, E. 1967. “A method of analysis of the stability of embankments assuming parallel inter-slice forces.” Géotechnique 17 (1): 11–26. https://doi.org/10.1680/geot.1967.17.1.11.
Steedman, R. S., and X. Zeng. 1990. “The influence of phase on the calculation of pseudo-static earth pressure on a retaining wall.” Géotechnique 40 (1): 103–112. https://doi.org/10.1680/geot.1990.40.1.103.
Taylor, D. W. 1937. “Stability of earth slopes.” J. Boston Soc. Civ. Eng. 24 (3): 197–246.
Taylor, D. W. 1948. Fundamentals of soil mechanics. New York: Wiley.
Toki, K., F. Miura, and Y. Oguni. 1985. “Dynamic slope stability analyses with a non-linear finite element method.” Earthquake Eng. Struct. Dyn. 13 (2): 151–171. https://doi.org/10.1002/eqe.4290130203.
Vahedifard, F., S. Shahrokhabadi, and D. Leshchinsky. 2016. “Optimal profile for concave slopes under static and seismic conditions.” Can. Geotech. J. 53 (9): 1522–1532. https://doi.org/10.1139/cgj-2016-0057.
Veiskarami, M., and A. Zanj. 2014. “Stability of sheet-pile walls subjected to seepage flow by slip lines and finite elements.” Géotechnique 64 (10): 759–775. https://doi.org/10.1680/geot.14.P.020.
Xiong, G.-J., J.-H. Wang, and J.-J. Chen. 2019. “Analytical solution for axisymmetric active earth pressure based on the characteristics method considering orthoradial geometric condition.” Int. J. Geomech. 19 (9): 04019099. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001406.
Xu, X., X. Zhou, X. Huang, and L. Xu. 2017. “Wedge-failure analysis of the seismic slope using the pseudodynamic method.” Int. J. Geomech. 17 (12): 04017108. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001015.
Zeng, X., and R. S. Steedman. 1993. “On the behaviour of quay walls in earthquakes.” Géotechnique 43 (3): 417–431. https://doi.org/10.1680/geot.1993.43.3.417.
Zheng, H., G. Sun, and D. Liu. 2009. “A practical procedure for searching critical slip surfaces of slopes based on the strength reduction technique.” Comput. Geotech. 36 (1–2): 1–5. https://doi.org/10.1016/j.compgeo.2008.06.002.
Zhou, J., and C. Qin. 2020. “Finite-element upper-bound analysis of seismic slope stability considering pseudo-dynamic approach.” Comput. Geotech. 122: 103530. https://doi.org/10.1016/j.compgeo.2020.103530.
Zhou, Y., F. Chen, and X. Wang. 2018. “Seismic active earth pressure for inclined rigid retaining walls considering rotation of the principal stresses with pseudo-dynamic method.” Int. J. Geomech. 18 (7): 04018083. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001198.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 21 • Issue 4 • April 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 4, 2020
Accepted: Nov 15, 2020
Published online: Feb 8, 2021
Published in print: Apr 1, 2021
Discussion open until: Jul 8, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.