Simple Scale Effect Model for the Volumetric Behavior of Rockfill Materials
Publication: International Journal of Geomechanics
Volume 21, Issue 3
Abstract
Bridging the mechanical response of rockfill materials with laboratory grading curves and field grading curves is of obvious importance in rockfill dam engineering and has been a great challenge for geotechnical researchers for decades. In this study, a novel approach was proposed to consider the scale effect on the volumetric behavior of rockfill materials. The proposed scale effect model was incorporated into an existing volume–stress equation and was validated by both the experimental data in the literature and the one-dimensional compression test results performed by the authors. Furthermore, it was demonstrated that the single scale-related parameter in the model, namely, the Weibull modulus m, obtained experimentally from the particulate scale, can also be applied for granular assemblies. This work provides not only a theoretical framework to understand the scale effect on the volumetric behavior of rockfill materials but also a very promising application in rockfill dam engineering: one can effectively estimate the volumetric behavior of a rockfill material with the field grading curve using simply experimentally obtained volume–stress data of a downscaled material and the single-particle crushing tests data of the composing rockfill particles.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Key R&D Program of China (Grant No. 2017YFC0404801) and the National Natural Science Foundation of China (Grant Nos. U1765205, 51979091 and 52009036).
References
Alonso, E. E., M. Tapias, and J. Gili. 2012. “Scale effects in rockfill behaviour.” Géotech. Lett. 2 (3): 155–160. https://doi.org/10.1680/geolett.12.00025.
Altuhafi, F. N., and M. R. Coop. 2011. “Changes to particle characteristics associated with the compression of sands.” Géotechnique 61 (6): 459–471. https://doi.org/10.1680/geot.9.P.114.
Bauer, E. 1996. “Calibration of a comprehensive hypoplastic model for granular materials.” Soils Found. 36 (1): 13–26. https://doi.org/10.3208/sandf.36.13.
Chong, S.-H., and J. C. Santamarina. 2016. “Soil compressibility models for a wide stress range.” J. Geotech. Geoenviron. Eng. 142 (6): 06016003. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001482.
Ciantia, M. O., M. Arroyo, C. O’Sullivan, A. Gens, and T. Liu. 2019. “Grading evolution and critical state in a discrete numerical model of Fontainebleau sand.” Géotechnique 69 (1): 1–15. https://doi.org/10.1680/jgeot.17.P.023.
Cil, M. B., and K. A. Alshibli. 2014. “3D evolution of sand fracture under 1D compression.” Géotechnique 64 (5): 351–364. https://doi.org/10.1680/geot.13.P.119.
Coop, M. R., K. K. Sorensen, T. B. Freitas, and G. Georgoutsos. 2004. “Particle breakage during shearing of a carbonate sand.” Géotechnique 54 (3): 157–163. https://doi.org/10.1680/geot.2004.54.3.157.
Cubrinovski, M., and K. Ishihara. 2002. “Maximum and minimum void ratio characteristics of sands.” Soils Found. 42 (6): 65–78. https://doi.org/10.3208/sandf.42.6_65.
Einav, I. 2007. “Breakage mechanics—Part I: Theory.” J. Mech. Phys. Solids 55 (6): 1274–1297. https://doi.org/10.1016/j.jmps.2006.11.003.
Farr, R. S., and R. D. Groot. 2009. “Close packing density of polydisperse hard spheres.” J. Chem. Phys. 131 (24): 244104. https://doi.org/10.1063/1.3276799.
Feng, Y. T., and D. R. J. Owen. 2014. “Discrete element modelling of large scale particle systems—I: Exact scaling laws.” Comput. Part. Mech. 1 (2): 159–168. https://doi.org/10.1007/s40571-014-0010-y.
Frossard, É, W. Hu, C. Dano, and P.-Y. Hicher. 2012. “Rockfill shear strength evaluation: A rational method based on size effects.” Géotechnique 62 (5): 415–427. https://doi.org/10.1680/geot.10.P.079.
Fu, Z., S. Chen, and B. Shi. 2018. “Large-scale triaxial experiments on the creep behavior of a saturated rockfill material.” J. Geotech. Geoenviron. Eng. 144 (7): 04018039. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001898.
Jia, Y., B. Xu, S. Chi, B. Xiang, D. Xiao, and Y. Zhou. 2019. “Particle breakage of rockfill material during triaxial tests under complex stress paths.” Int. J. Geomech. 19 (12): 04019124. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001517.
Kermani, M., J. M. Konrad, and M. Smith. 2018. “In situ short-term and long-term rockfill compressibility as a function of void ratio and strength of parent rock.” J. Geotech. Geoenviron. Eng. 144 (4): 04018009. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001835.
Lee, D. 1992. “The angles of friction of granular fills.” Ph.D. thesis, Dept. of Engineering, Univ. of Cambridge.
Marachi, N. D., C. K. Chan, and H. B. Seed. 1972. “Evaluation of properties of rockfill materials.” J. Soil Mech. Found. Div. 98 (1): 95–114.
McDowell, G. R., and A. Amon. 2000. “The application of Weibull statistics to the fracture of soil particles.” Soils Found. 40 (5): 133–141. https://doi.org/10.3208/sandf.40.5_133.
Nakata, A. F. L., M. Hyde, H. Hyodo, and H. Murata. 1999. “A probabilistic approach to sand particle crushing in the triaxial test.” Géotechnique 49 (5): 567–583. https://doi.org/10.1680/geot.1999.49.5.567.
Nakata, Y., Y. Kato, M. Hyodo, A. F. L. Hyde, and H. Murata. 2001. “One-dimensional compression behaviour of uniformly graded sand related to single particle crushing strength.” Soils Found. 41 (2): 39–51. https://doi.org/10.3208/sandf.41.2_39.
Pedroso, D. M., D. Sheng, and J. Zhao. 2009. “The concept of reference curves for constitutive modelling in soil mechanics.” Comput. Geotech. 36 (1–2): 149–165. https://doi.org/10.1016/j.compgeo.2008.01.009.
Pestana, J. M., and A. J. Whittle. 1995. “Compression model for cohesionless soils.” Géotechnique 45 (4): 611–632. https://doi.org/10.1680/geot.1995.45.4.611.
Shen, C., S. Liu, L. Wang, and Y. Wang. 2019a. “Micromechanical modeling of particle breakage of granular materials in the framework of thermomechanics.” Acta Geotech. 14 (4): 939–954. https://doi.org/10.1007/s11440-018-0692-z.
Shen, C., S. Liu, S. Xu, and L. Wang. 2019b. “Rapid estimation of maximum and minimum void ratios of granular soils.” Acta Geotech. 14 (4): 991–1001. https://doi.org/10.1007/s11440-018-0714-x.
Sheng, D., Y. Yao, and J. P. Carter. 2008. “A volume–stress model for sands under isotropic and critical stress states.” Can. Geotech. J. 45 (11): 1639–1645. https://doi.org/10.1139/T08-085.
Varadarajan, A., K. G. Sharma, K. Venkatachalam, and A. K. Gupta. 2003. “Testing and modeling two rockfill materials.” J. Geotech. Geoenviron. Eng. 129 (3): 206–218. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:3(206).
Wood, D. M. 1990. Soil behaviour and critical state soil mechanics. Cambridge, UK: Cambridge University Press.
Wood, D. M., and K. Maeda. 2008. “Changing grading of soil: Effect on critical states.” Acta Geotech. 3 (1): 3–14. https://doi.org/10.1007/s11440-007-0041-0.
Xiao, Y., H. Liu, Y. Chen, and J. Jiang. 2014. “Strength and deformation of rockfill material based on large-scale triaxial compression tests. I: Influences of density and pressure.” J. Geotech. Geoenviron. Eng. 140 (12): 04014070. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001176.
Xiao, Y., H. Liu, X. Ding, Y. Chen, J. Jiang, and W. Zhang. 2016. “Influence of particle breakage on critical state line of rockfill material.” Int. J. Geomech. 16 (1): 04015031. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000538.
Xiao, Y., A. W. Stuedlein, J. Ran, T. M. Evans, L. Cheng, H. Liu, L. A. van Paassen, and J. Chu. 2019a. “Effect of particle shape on strength and stiffness of biocemented glass beads.” J. Geotech. Geoenviron. Eng. 145 (11): 06019016. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002165.
Xiao, Y., Z. Sun, C. S. Desai, and M. Meng. 2019b. “Strength and surviving probability in grain crushing under acidic erosion and compression.” Int. J. Geomech. 19 (11): 04019123. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001508.
Xiao, Y., Z. Yuan, C. S. Desai, M. Zaman, Q. Ma, Q. Chen, and H. Liu. 2020. “Effects of load duration and stress level on deformation and particle breakage of carbonate sands.” Int. J. Geomech. 20 (7): 06020014. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001731.
Yang, J., and X. Q. Gu. 2013. “Shear stiffness of granular material at small strains: Does it depend on grain size?” Géotechnique 63 (2): 165–179. https://doi.org/10.1680/geot.11.P.083.
Yin, Z.-Y., P.-Y. Hicher, C. Dano, and Y.-F. Jin. 2016. “Modeling mechanical behavior of very coarse granular materials.” J. Eng. Mech. 143 (1): C4016006. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001059.
Youd, T. L. 1973. “Factors controlling maximum and minimum densities of sands.” In Evaluation of relative density and its role in geotechnical projects involving cohesionless soils, STP 523, edited by E. Selig and R. Ladd, 98–112. West Conshohocken, PA: ASTM.
Yu, F. W. 2017. “Particle breakage and the critical state of sands.” Géotechnique 67 (8): 713–719. https://doi.org/10.1680/jgeot.15.P.250.
Yu, J., C. Shen, S. Liu, and Y. Cheng. 2020. “Exploration of the survival probability and shape evolution of crushable particles during one-dimensional compression using dyed gypsum particles.” J. Geotech. Geoenviron. Eng. 146 (11): 04020121. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002371.
Zhang, Y. D., G. Buscarnera, and I. Einav. 2016. “Grain size dependence of yielding in granular soils interpreted using fracture mechanics, breakage mechanics and Weibull statistics.” Géotechnique 66 (2): 149–160. https://doi.org/10.1680/jgeot.15.P.119.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: May 12, 2020
Accepted: Oct 10, 2020
Published online: Dec 21, 2020
Published in print: Mar 1, 2021
Discussion open until: May 21, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.