Effects of Soil Strength Nonlinearity on Slip Surfaces of Homogeneous Slopes
Publication: International Journal of Geomechanics
Volume 21, Issue 1
Abstract
Slope slip surface plays a vital role in the prevention and control of landslide hazards. For homogeneous soil slopes, a three-dimensional (3D) limit analysis method was used to analyze the slope critical slip surfaces with a nonlinear strength envelope. The critical slip surfaces can be obtained once the least upper bounds on slope stability were calculated by using a numerical optimization procedure. For various clay slopes, some comparisons of critical slip surfaces associated with linear and nonlinear strength criteria were made to evaluate the effects of soil strength nonlinearity on slip surfaces. For slopes with a nonlinear criterion, the critical slip surface tends to be shallower gradually as the slope inclination increases, which is opposite to that for slopes with a linear strength criterion. Besides, the influences of width constraint on the critical slip surfaces associated with two strength criteria become more significant for steeper slopes. Compared with the solutions for slopes with the linear strength criterion, 3D effects on slope slip surfaces will be more remarkable for slopes considering soil strength nonlinearity.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was sponsored by the National Natural Science Foundation of China (Grant Nos. 51708310 and 41630638) and Shandong Provincial Natural Science Foundation, China (Grant No. ZR2017BEE066).
References
Baker, R. 2003. “Inter-relations between experimental and computational aspects of slope stability analysis.” Int. J. Numer. Anal. Methods Geomech. 27 (5): 379–401. https://doi.org/10.1002/nag.277.
Baker, R. 2004. “Nonlinear Mohr envelopes based on triaxial data.” J. Geotech. Geoenviron. Eng. 130 (5): 498–506. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:5(498).
Bishop, A. W., D. L. Webb, and P. I. Lewin. 1965. “Undisturbed samples of London clay from the Ashford common shaft: Strength–effective stress relationships.” Géotechnique 15 (1): 1–31. https://doi.org/10.1680/geot.1965.15.1.1.
Charles, J. A., and M. M. Soares. 1984. “The stability of slopes in soils with nonlinear failure envelopes.” Can. Geotech. J. 21 (3): 397–406. https://doi.org/10.1139/t84-044.
Chen, Z. Y. 1992. “Random trials used in determining global minimum factors of safety of slopes.” Can. Geotech. J. 29 (2): 225–233. https://doi.org/10.1139/t92-026.
Deng, D., L. Zhao, and L. Li. 2015. “Limit equilibrium slope stability analysis using the nonlinear strength failure criterion.” Can. Geotech. J. 52 (5): 563–576. https://doi.org/10.1139/cgj-2014-0111.
Drescher, A., and C. Christopoulos. 1988. “Limit analysis slope stability with nonlinear yield condition.” Int. J. Numer. Anal. Methods Geomech. 12 (3): 341–345. https://doi.org/10.1002/nag.1610120307.
Eid, H. T. 2014. “Stability charts for uniform slopes in soils with nonlinear failure envelopes.” Eng. Geol. 168: 38–45. https://doi.org/10.1016/j.enggeo.2013.10.021.
Gao, Y., D. Wu, and F. Zhang. 2015. “Effects of nonlinear failure criterion on the three-dimensional stability analysis of uniform slopes.” Eng. Geol. 198: 87–93. https://doi.org/10.1016/j.enggeo.2015.09.010.
Gao, Y., D. Wu, F. Zhang, H. Qin, and D. Zhu. 2016. “Effects of nonlinear strength parameters on the stability of 3D soil slopes.” J. Central South Univ. 23 (9): 2354–2363. https://doi.org/10.1007/s11771-016-3294-7.
Gao, Y. F., F. Zhang, G. H. Lei, and D. Y. Li. 2013. “An extended limit analysis of three-dimensional slope stability.” Géotechnique 63 (6): 518–524. https://doi.org/10.1680/geot.12.T.004.
Jiang, J. C., R. Baker, and T. Yamagami. 2003. “The effect of strength envelope nonlinearity on slope stability computations.” Can. Geotech. J. 40 (2): 308–325. https://doi.org/10.1139/t02-111.
Lefebvre, G. 1981. “Strength and slope stability in Canadian soft clay deposits.” Can. Geotech. J. 18 (3): 420–442. https://doi.org/10.1139/t81-047.
Li, D., and Y. Cheng. 2012. “Lower bound limit analysis using nonlinear failure criteria.” Procedia Earth Planet. Sci. 5: 170–174. https://doi.org/10.1016/j.proeps.2012.01.030.
Li, X. 2007. “Finite element analysis of slope stability using a nonlinear failure criterion.” Comput. Geotech. 34 (3): 127–136. https://doi.org/10.1016/j.compgeo.2006.11.005.
Li, Y., and X. Yang. 2019a. “Seismic displacement of 3D slope reinforced by piles with nonlinear failure criterion.” Int. J. Geomech. 19 (6): 04019042. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001411.
Li, Y. X., and X. L. Yang. 2019b. “Soil-slope stability considering effect of soil-strength nonlinearity.” Int. J. Geomech. 19 (3): 04018201. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001355.
Maksimovic, M. 1989. “Nonlinear failure envelope for soils.” J. Geotech. Eng. 115 (4): 581–586. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:4(581).
Popescu, M., K. Ugai, and A. Trandafir. 2000. “Linear versus nonlinear failure envelopes in LEM and FEM slope stability analysis.” In Vol. 3 of Proc. 8th Int. Symp. on Landslides, 1227–1234. London, UK: Thomas Telford.
Skempton, A. W. 1985. “Residual strength of clays in landslides, folded strata and the laboratory.” Géotechnique 35 (1): 3–18. https://doi.org/10.1680/geot.1985.35.1.3.
Srbulov, M. 1997. “On the influence of soil strength brittleness and nonlinearity on slope stability.” Comput. Geotech. 20 (1): 95–104. https://doi.org/10.1016/S0266-352X(96)00014-6.
Wu, D., Y. Wang, Y. Qiu, J. Zhang, and Y. Wan. 2019. “Determination of Mohr–Coulomb parameters from nonlinear strength criteria for 3D slopes.” Math. Probl. Eng. 2019: 6927654. https://doi.org/10.1155/2019/6927654.
Yang, X., and S. Chi. 2013. “Upper bound finite element analysis of slope stability using a nonlinear failure criterion.” Comput. Geotech. 54: 185–191. https://doi.org/10.1016/j.compgeo.2013.06.007.
Yang, X. L., and J. H. Yin. 2004. “Slope stability analysis with nonlinear failure criterion.” J. Eng. Mech. 130 (3): 267–273. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:3(267).
Zhang, R., and C. Smith. 2020. “Upper bound limit analysis of soils with a non-linear failure criterion.” Can. Geotech. J. 57 (3): 423–432. https://doi.org/10.1139/cgj-2018-0513.
Zhang, X. J., and W. F. Chen. 1987. “Stability analysis of slopes with general nonlinear failure criterion.” Int. J. Numer. Anal. Methods Geomech. 11 (1): 33–50. https://doi.org/10.1002/nag.1610110104.
Zhao, L., X. Cheng, H. Dan, Z. Tang, and Y. Zhang. 2017. “Effect of the vertical earthquake component on permanent seismic displacement of soil slopes based on the nonlinear Mohr–Coulomb failure criterion.” Soils Found. 57 (2): 237–251. https://doi.org/10.1016/j.sandf.2016.12.002.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Dec 18, 2019
Accepted: Aug 23, 2020
Published online: Oct 23, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 23, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.