New Method to Evaluate Strengthen Efficiency by Dynamic Compaction
Publication: International Journal of Geomechanics
Volume 20, Issue 4
Abstract
The tamping energy or tamping momentum usually is adopted to evaluate the efficiency of dynamic compaction (DC), meaning that the same tamping energy or tamping momentum leads to the same strengthening effect to the soil. This paper presented some new findings from field monitoring and numerical simulation of DC of granular soil. The phenomenon of particle breakage was taken into account for both large-scale field tests and the numerical study. A series of large-scale DC field tests was conducted with nine different combinations of hammer weight () and drop height (). The results showed that neither tamping energy nor tamping momentum controls the efficiency of dynamic compaction, which leads to overestimation the contribution of drop height. The findings were confirmed by numerical results in which the quantity was kept constant and was varied. It was found that the same compaction efficiency can be obtained when is about 0.2. A parameter is recommended to balance the contribution ratio of to . The findings from this study may benefit the engineering application and further research of DC.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the National Key R&D Program of China (No. 2018YFB1600100), the Natural Science Foundation of China (Nos. 51722812 and 51908066), and the Natural Science Foundation of Hunan Province (No. 2017JJ1033).
References
Abolmaali, A., and A. Kararam. 2013. “Nonlinear finite element modeling analysis of soil–pipe interaction.” Int. J. Geomech. 13 (3): 197–204. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000196.
Bandini, V., and M. R. Coop. 2011. “The influence of particle breakage on the location of the critical state line of sands.” Soils Found. 51 (4): 591–600. https://doi.org/10.3208/sandf.51.591.
Ciantia, M. O., M. Arroyo, F. Calvetti, and A. Gens Solé. 2015. “An approach to enhance efficiency of DEM modelling of soils with crushable grains.” Géotechnique 65 (2): 91–110. https://doi.org/10.1680/geot.13.P.218.
de Bono, J. P., and G. R. McDowell. 2016. “Particle breakage criteria in discrete-element modelling.” Géotechnique 66 (12): 1014–1027. https://doi.org/10.1680/jgeot.15.P.280.
Feng, S. J., F. L. Du, Z. M. Shi, W. H. Shui, and K. Tan. 2015. “Field study on the reinforcement of collapsible loess using dynamic compaction.” Eng. Geol. 185 (Feb): 105–115. https://doi.org/10.1016/j.enggeo.2014.12.006.
Feng, S. J., S. F. Lu, Z. M. Shi, and W. H. Shui. 2014. “Densification of loosely deposited soft soils using the combined consolidation method.” Eng. Geol. 181 (Oct): 169–179. https://doi.org/10.1016/j.enggeo.2014.07.010.
Ghassemi, A., A. Pak, and H. Shahir. 2010. “Numerical study of the coupled hydro-mechanical effects in dynamic compaction of saturated granular soils.” Comput. Geotech. 37 (1): 10–24. https://doi.org/10.1016/j.compgeo.2009.06.009.
Gu, Q., and F. H. Lee. 2002. “Ground response to dynamic compaction of dry sand.” Géotechnique 52 (7): 481–493. https://doi.org/10.1680/geot.2002.52.7.481.
Han, Y. H., Y. L. Dong, and X. H. Bai. 2015. “Model test on process of hammer under dynamic compaction of loess.” [In Chinese.] Chin. J. Rock Mech. Eng. 34 (3): 631–638.
He, Z., and B. Wang. 2018. “Instability process model test for bedding rock slope with weak interlayer under different rainfall conditions.” In Advances in civil engineering, 1–8. West Conshohocken, PA: ASTM.
Jensen, R. P., M. E. Plesha, T. B. Edil, P. J. Bosscher, and N. B. Kahla. 2001. “DEM simulation of particle damage in granular media—Structure interfaces.” Int. J. Geomech. 1 (1): 21–39. https://doi.org/10.1061/(ASCE)1532-3641(2001)1:1(21).
Jia, M. C., L. Wang, and J. Zhou. 2009. “Mesomechanical analysis of characteristics of dry sands in response to dynamic compaction with PFC2D.” [In Chinese.] Rock Soil Mech. 30 (4): 871–878.
Jia, Y., B. Xu, S. Chi, B. Xiang, and Y. Zhou. 2017. “Research on the particle breakage of rockfill materials during triaxial tests.” Int. J. Geomech. 17 (10): 04017085. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000977.
Jiang, M. J., J. M. Konrad, and S. Leroueil. 2003. “An efficient technique for generating homogeneous specimens for DEM studies.” Comput. Geotech. 30 (7): 579–597. https://doi.org/10.1016/S0266-352X(03)00064-8.
Lee, F. H., and Q. Gu. 2004. “Method for estimating dynamic compaction effect on sand.” J. Geotech. Geoenviron. Eng. 130 (2): 139–152. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:2(139).
Leonards, G. A., W. A. Cutter, and R. D. Holtz. 1980. “Dynamic compaction of granular soils.” J. Geotech. Geoenviron. Eng. 106 (1): 35–44.
Li, S., X. Huang, and C. Zeng. 2016a. “Performance of an embankment foundation with sand over clay: Experimental and numerical analyses.” Int. J. Geomech. 17 (6): 06016038. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000841.
Li, X., S. Zhang, D. Sheng, and S. Zhang. 2016b. “A reasonable sample capacity for grain size analysis test based on sampling reliability.” [In Chinese.] Chin. J. Rock Mech. Eng. 38 (11): 2122–2127.
Liu, M., and Y. Gao. 2017. “Constitutive modeling of coarse-grained materials incorporating the effect of particle breakage on critical state behavior in a framework of generalized plasticity.” Int. J. Geomech. 17 (5): 04016113. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000759.
Lukas, R. G. 1992. “Dynamic compaction engineering considerations.” In Vol. 30 of Soil improvement and geosynthetics, 940–953. Reston, VA: ASCE.
Mayne, P. W., J. S. Jones, and J. C. Dumas. 1984. “Ground response to dynamic compaction.” J. Geotech. Eng. 110 (6): 757–774. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:6(757).
McDowell, G. R. 2002. “On the yielding and plastic compression of sand.” Soils Found. 42 (1): 139–145. https://doi.org/10.3208/sandf.42.139.
McDowell, G. R., and J. P. de Bono. 2013. “On the micro mechanics of one-dimensional normal compression.” Géotechnique 63 (11): 895–908. https://doi.org/10.1680/geot.12.P.041.
McDowell, G. R., J. P. de Bono, P. Yue, and H. S. Yu. 2013. “Micro mechanics of isotropic normal compression.” Géotech. Lett. 3 (4): 166–172. https://doi.org/10.1680/geolett.13.00050.
Menard, L., and Y. Broise. 1975. “Theoretical and practical aspects of dynamic consolidation.” Géotechnique 25 (1): 3–18.
Mikasa, M., N. Takada, M. Ikeda, and I. Takeuchi. 1988. “Centrifuge model test of dynamic consolidation.” In Proc., Centrifuge 88: Proc., Int. Conf. on Geotechnical Centrifuge Modelling, edited by J. F. Corte, 185–192. Boca Raton, FL: CRC Press.
Oshima, A., and N. Takada. 1998. “Evaluation of compacted area of heavy tamping by cone point resistance.” In Proc., Int. Conf. Centrifuge 98, edited by T. Kimura, O. Kusakabe, and J. Takemura, 813–818. Rotterdam, Netherlands: A.A. Balkema.
Pasdarpour, M., M. Ghazavi, M. Teshnehlab, and S. Sadrnejad. 2009. “Optimal design of soil dynamic compaction using genetic algorithm and fuzzy system.” Soil Dyn. Earthquake Eng. 29 (7): 1103–1112. https://doi.org/10.1016/j.soildyn.2008.09.003.
Poran, C. J., and J. A. Rodriguez. 1992. “Design of dynamic compaction.” Can. Geotech. J. 29 (5): 796–802. https://doi.org/10.1139/t92-087.
Rollins, K. M., and J. H. Kim. 2010. “Dynamic compaction of collapsible soils based on US case histories.” J. Geotech. Geoenviron. Eng. 136 (9): 1178–1186. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000331.
Russell, A. R., D. M. Wood, and M. Kikumoto. 2009. “Crushing of particles in idealised granular assemblies.” J. Mech. Phys. Solids 57 (8): 1293–1313. https://doi.org/10.1016/j.jmps.2009.04.009.
Suits, L. D., T. C. Sheahan, and X. Cui. 2010. “Real-time diagnosis method of compaction state of subgrade during dynamic compaction.” Geotech. Test. J. 33 (4): 299–303. https://doi.org/10.1520/GTJ102268.
Takei, M., O. Kusakabe, and T. Hayashi. 2001. “Time-dependent behavior of crushable materials in one-dimensional compression tests.” Soils Found. 41 (1): 97–121. https://doi.org/10.3208/sandf.41.97.
Wada, K., H. Senshu, and T. Matsui. 2006. “Numerical simulation of impact cratering on granular material.” Icarus 180 (2): 528–545. https://doi.org/10.1016/j.icarus.2005.10.002.
Wang, W., L. L. Zhang, J. J. Chen, and J. H. Wang. 2015. “Parameter estimation for coupled hydromechanical simulation of dynamic compaction based on pareto multiobjective optimization.” Shock Vib. 2015 (4): 1–15. https://doi.org/10.1155/2015/127878.
Wei, H., T. Zhao, J. He, Q. Meng, and X. Wang. 2018. “Evolution of particle breakage for calcareous sands during ring shear tests.” Int. J. Geomech. 18 (2): 04017153. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001073.
Xi, L., L. Jing, M. Xinyan, T. Jidong, and Z. Sheng. 2018. “Numerical study of the dynamic compaction process considering the phenomenon of particle breakage.” In Advances in civil engineering, 1838370. West Conshohocken, PA: ASTM.
Xiao, Y., and H. Liu. 2016. “Elastoplastic constitutive model for rockfill materials considering particle breakage.” Int. J. Geomech. 17 (1): 04016041. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000681.
Xiao, Y., H. Liu, Y. Chen, and J. Jiang. 2014. “Strength and deformation of rockfill material based on large-scale triaxial compression tests. II: Influence of particle breakage.” Int. J. Geomech. 140 (12): 04014071. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001177.
Xiao, Y., H. Liu, Y. Chen, J. Jiang, and W. Zhang. 2015a. “State dependent constitutive model for rockfill materials.” Int. J. Geomech. 15 (5): 04014075. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000421.
Xiao, Y., H. Liu, X. Ding, Y. Chen, J. Jiang, and W. Zhang. 2016. “Influence of particle breakage on critical state line of rockfill material.” Int. J. Geomech. 16 (1): 04015031. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000538.
Xiao, Y., Y. F. Sun, and K. F. Hanif. 2015b. “A particle-breakage critical state model for rockfill material.” Sci. China Technol. Sci. 58 (7): 1125–1136. https://doi.org/10.1007/s11431-015-5831-2.
Xiao, Y., Z. Sun, A. W. Stuedlein, C. Wang, Z. Wu, and Z. Zhang. 2019a. “Bounding surface plasticity model for stress-strain and grain-crushing behaviors of rockfill materials.” Geosci. Front. https://doi.org/10.1016/j.gsf.2019.06.010.
Xiao, Y., Z. Yuan, J. Chu, H. Liu, J. Huang, S. N. Luo, S. Wang, and J. Lin. 2019b. “Particle breakage and energy dissipation of carbonate sands under quasi-static and dynamic compression.” Acta Geotech. 14 (6): 1741–1755. https://doi.org/10.1007/s11440-019-00790-1.
Xu, M., J. Hong, and E. Song. 2017. “DEM study on the effect of particle breakage on the macro- and micro-behavior of rockfill sheared along different stress paths.” Comput. Geotech. 89 (Sep): 113–127. https://doi.org/10.1016/j.compgeo.2017.04.012.
Yu, F. W. 2018. “Particle breakage and the undrained shear behavior of sands.” Int. J. Geomech. 18 (7): 04018079. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001203.
Zhang, S., X. Li, J. Teng, X. Ma, and D. Sheng. 2017. “A theoretical method for determining sample mass in a sieving test.” Comput. Geotech. 91 (Nov): 12–16. https://doi.org/10.1016/j.compgeo.2017.06.004.
Zhang, S., C. X. Tong, X. Li, and D. Sheng. 2015. “A new method for studying the evolution of particle breakage.” Géotechnique 65 (11): 911–922. https://doi.org/10.1680/jgeot.14.P.240.
Zhao, Z., and E. X. Song. 2015. “Particle mechanics modeling of creep behavior of rockfill materials under dry and wet conditions.” Comput. Geotech. 68 (Jul): 137–146. https://doi.org/10.1016/j.compgeo.2015.04.008.
Zhou, W., L. Yang, G. Ma, X. Chang, Z. Lai, and K. Xu. 2016. “DEM analysis of the size effects on the behavior of crushable granular materials.” Granular Matter 18 (1): 1–11. https://doi.org/10.1007/s10035-015-0597-6.
Zou, J. F., Y. M. Sheng, and Z. Q. Xia. 2017. “Dynamic stress properties of dynamic compaction (DC) in a red-sandstone soil–rock mixture embankment.” Environ. Earth Sci. 76 (12): 411. https://doi.org/10.1007/s12665-017-6743-1.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Nov 1, 2018
Accepted: Jul 23, 2019
Published online: Feb 3, 2020
Published in print: Apr 1, 2020
Discussion open until: Jul 3, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.