Performance Evaluation of Special RC Moment Frames against Collapse Considering Soil–Structure Interaction
Publication: International Journal of Geomechanics
Volume 20, Issue 2
Abstract
In this paper the study of FEMA-P695 on collapse performance of moment frames is extended to take soil–structure interaction into account. Special reinforced concrete moment frames being 4, 8, 12, and 16 stories tall resting on firm, medium, and soft soils are considered. The incremental dynamic analysis is performed under several strong ground motions to determine the fragility curves of the same structures both on rigid and flexible bases. Modeling of the flexible base is performed using the beam-on-nonlinear-foundation method in which the underlying soil is replaced with materially nonlinear no-tension springs. The comparative study reveals that for keeping the collapse probability lower than a certain value, the maximum acceptable design spectral acceleration including soil–structure interaction has to be considerably smaller than that on a fixed base. The reason is shown to be happening because of larger drifts in the lower stories of a building when its base is flexible. Moreover, modified fragility curves are developed for fixed-base structures in which effects of soil–structure interaction are included. A simple tool for performing such a correction is also presented. The correction is shown to be quite distinctive in certain cases.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI (American Concrete Institute). 2008. Building code requirements for structural concrete. ACI 318. Farmington Hills, MI: ACI.
Altoontash, A. 2004. “Simulation and damage models for performance assessment of reinforced concrete beam-column joints.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Stanford Univ.
ASCE. 2006. Seismic rehabilitation of existing buildings. ASCE/SEI 41. Reston, VA: ASCE.
ASCE. 2010. Minimum design loads for buildings and other structures. ASCE/SEI 7. Reston, VA: ASCE.
Chen, C. H., and S. A. Mahin. 2010. “Example collapse performance evaluation of steel concentrically braced systems.” In Proc., 9th US National and 10th Canadian Conf. on Earthquake Engineering. Oakland, CA: Earthquake Engineering Research Institute.
Fatahi, B., and S. H. R. Tabatabaiefar. 2014. “Fully nonlinear versus equivalent linear computation method for seismic analysis of midrise buildings on soft soils.” Int. J. Geomech. 14 (4): 04014016. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000354.
FEMA. 2009. Quantification of building seismic performance factors. FEMA P695. Washington, DC: FEMA.
Gajan, S., T. Hutchinson, B. L. Kutter, P. Raychowdhury, and A. Ugalde. 2008. Numerical models for analysis and performance-based design of shallow foundations subjected to seismic loading. Berkeley, CA: Univ. of California, Berkeley.
Harden, C. W., T. Hutchinson, G. R. Martin, and B. L. Kutter. 2005. Numerical modeling of the nonlinear cyclic response of shallow foundations. Berkeley, CA: Univ. of California, Berkeley.
Harden, C. W., and T. C. Hutchinson. 2009. “Beam-on-nonlinear-Winkler-foundation modeling of shallow, rocking-dominated footings.” Earthquake Spectra 25 (2): 277–300. https://doi.org/10.1193/1.3110482.
Haselton, C. B., and G. G. Deierlein. 2008. Assessing seismic collapse safety of modern reinforced concrete moment-frame buildings. Berkeley, CA: Univ. of California, Berkeley.
Haselton, C. B., C. A. Goulet, J. Mitrani-Reiser, J. L. Beck, G. G. Deierlein, K. A. Porter, J. P. Stewart, and E. Taciroglu. 2008a. An assessment to benchmark the seismic performance of a code-conforming reinforced concrete moment-frame building. Berkeley, CA: Univ. of California, Berkeley.
Haselton, C. B., A. B. Liel, and G. G. Deierlein. 2009. “Simulating structural collapse due to earthquakes: Model idealization, model calibration, and numerical solution algorithms.” In Proc., 2nd Int. Conf. Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN). Athens, Greece: National Technical University of Athens.
Haselton, C. B., A. B. Liel, and G. G. Deierlein. 2010. “Example application of the FEMA P695 (ATC-63) methodology for the collapse performance evaluation of reinforced concrete special moment frame systems.” In Proc., 9th US National and 10th Canadian Conf. on Earthquake Engineering. Oakland, CA: Earthquake Engineering Research Institute.
Haselton, C. B., A. B. Liel, S. Taylor Lange, and G. G. Deierlein. 2008b. Beam-column element model calibrated for predicting flexural response leading to global collapse of RC frame buildings. Berkeley, CA: Univ. of California, Berkeley.
Ibarra, L. F., and H. Krawinkler. 2005. Global collapse of frame structures under seismic excitations. Stanford, CA: Stanford Univ.
Ibarra, L. F., R. A. Media, and H. Krawinkler. 2005. “Hysteretic models that incorporate strength and stiffness deterioration.” Earthquake Eng. Struct. Dyn. 34 (12): 1489–1511. https://doi.org/10.1002/eqe.495.
Koutromanos, I., and P. B. Shing. 2010. “Example application of the FEMA P695 (ATC-63) methodology for the collapse performance evaluation of reinforced masonry shear wall structures.” In Proc., 9th US National and 10th Canadian Conf. on Earthquake Engineering. Oakland, CA: Earthquake Engineering Research Institute.
Martinelli, E., C. Lima, and G. De Stefano. 2015. “A simplified procedure for nonlinear static analysis of masonry infilled RC frames.” Eng. Struct. 101: 591–608. https://doi.org/10.1016/j.engstruct.2015.07.023.
PEER (Pacific Earthquake Engineering Research Center). 2006. “PEER next-generation attenuation (NGA) database.” Accessed November 10, 2012. https://peer.berkeley.edu/peer-strong-ground-motion-databases/.
Rajeev, P., and S. Tesfamariam. 2012. “Seismic fragilities of non-ductile reinforced concrete frames with consideration of soil structure interaction.” Soil Dyn. Earthquake Eng. 40: 78–86. https://doi.org/10.1016/j.soildyn.2012.04.008.
Raychowdhury, P. 2008. “Nonlinear Winkler-based shallow foundation model for performance assessment of seismically loaded structures.” Ph.D. thesis, Dept. of Structural Engineering, Univ. of California, San Diego.
Raychowdhury, P. 2009. “Effect of soil parameter uncertainty on seismic demand of low-rise steel buildings on dense silty sand.” Soil Dyn. Earthquake Eng. 29 (10): 1367–1378. https://doi.org/10.1016/j.soildyn.2009.03.004.
Saez, E., F. Lopez-Caballero, and A. Modaressi-Farahmand-Razavi. 2011. “Effect of the inelastic dynamic soil–structure interaction on the seismic vulnerability assessment.” Struct. Saf. 33 (1): 51–63. https://doi.org/10.1016/j.strusafe.2010.05.004.
Seed, H. B., and I. M. Idriss. 1970. Soil moduli and damping factors for dynamic response analyses. Berkeley, CA: Univ. of California, Berkeley.
Tabatabaiefar, S. H. R., B. Fatahi, and B. Samali. 2013. “Seismic behavior of building frames considering dynamic soil-structure interaction.” Int. J. Geomech. 13 (4): 409–420. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000231.
USGS. 2012. US Geological Survey. Accessed November 6, 2012. http://usgs.gov.
Vamvatsikos, D., and C. A. Cornell. 2002. “Incremental dynamic analysis.” Earthquake Eng. Struct. Dyn. 31 (3): 491–514. https://doi.org/10.1002/eqe.141.
Vivek, B., and P. Raychowdhury. 2017. “Influence of SSI on period and damping of buildings supported by shallow foundations on cohesionless soil.” Int. J. Geomech. 17 (8): 04017030. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000890.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Sep 23, 2018
Accepted: Jun 12, 2019
Published online: Dec 12, 2019
Published in print: Feb 1, 2020
Discussion open until: May 12, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.