Impact of Earthquake Characteristics on Seismic Slope Stability Using Modified Pseudodynamic Method
Publication: International Journal of Geomechanics
Volume 19, Issue 9
Abstract
Seismic slope stability analysis is often limited by the ability to encompass specific earthquake characteristics, such as shaking amplitude, frequency, and time as well as varying soil properties, such as cohesion and friction angle across the depth with consideration of damping and amplification. In this paper, a simple procedure that combines the discretization-based kinematic analysis and modified pseudodynamic method is presented to offer a more holistic analysis considering earthquake and soil characteristics more appropriately. This is achieved by the implementation of the discretization-based kinematic analysis along with a modified pseudodynamic method. The discretization technique aids to generate a kinematically admissible failure surface with considerations to varied soil strength parameters. Its significance lies in the preprocessing to generate a unique failure mechanism dependent on the varied soil properties of the slope while also facilitating the work rate calculations. The use of the modified pseudodynamic method is adopted in this study to overcome the shortcomings of the pseudostatic and simple pseudodynamic method, enabling one to consider the complete time history of earthquake-induced ground movement, having also considered the amplification effect when shaking approaches the soil’s natural frequency. Equating the external and internal rates of work by integration of elementary rates yields the closed-form solution in yield seismic acceleration and/or slope-bearing capacity. A parametric study with a range of independent variables, accompanied with detailed discussion, is also presented to offer a more pragmatic perspective on the performance of nonuniform stratified slopes subjected to earthquakes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was financially supported by the President’s Graduate Fellowship for the first author during his Ph.D. study at National University of Singapore.
References
Annapareddy, V. R., A. Pain, and S. Sarkar. 2017. “Seismic translational failure analysis of MSW landfills using modified pseudo-dynamic approach.” Int. J. Geomech. 17 (10): 04017086. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000990.
Basha, B. M., and G. L. S. Babu. 2009. “Computation of sliding displacements of bridge abutments by pseudo-dynamic method.” Soil Dyn. Earthquake Eng. 29 (1): 103–120. https://doi.org/10.1016/j.soildyn.2008.01.006.
Bellezza, I. 2015. “Seismic active earth pressure on walls using a new pseudo-dynamic approach.” Geotech. Geol. Eng. 33 (4): 795–812. https://doi.org/10.1007/s10706-015-9860-1.
Bray, J. D., and T. Travasarou. 2007. “Simplified procedure for estimating earthquake-induced deviatoric slope displacements.” J. Geotech. Geoenviron. Eng. 133 (4): 381–392. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:4(381).
Chen, W. F. 1975. Limit analysis and soil plasticity. Amsterdam, Netherlands: Elsevier Science.
Choudhury, D., and S. S. Nimbalkar. 2007. “Seismic rotational displacement of gravity walls by pseudo-dynamic method: Passive case.” Soil Dyn. Earthquake Eng. 27 (3): 242–249. https://doi.org/10.1016/j.soildyn.2006.06.009.
Choudhury, D., and S. S. Nimbalkar. 2008. “Seismic rotational displacement of gravity walls by pseudodynamic method.” Int. J. Geomech. 8 (3): 169–175. https://doi.org/10.1061/(ASCE)1532-3641(2008)8:3(169).
Jafarian, Y., and A. Lashgari. 2016. “Simplified procedure for coupled seismic sliding movement of slopes using displacement-based critical acceleration.” Int. J. Geomech. 16 (4): 04015101. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000578.
Jafarian, Y., and A. Lashgari. 2017. “Seismic sliding analysis of sandy slopes subjected to pore-water pressure buildup.” Int. J. Geomech. 17 (11): 04017106. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001013.
Kramer, S. L. 1996. Geotechnical earthquake engineering. Upper Saddle River, NJ: Prentice Hall.
Michalowski, R. L. 1989. “Three-dimensional analysis of locally loaded slopes.” Géotechnique 39 (1): 27–38. https://doi.org/10.1680/geot.1989.39.1.27.
Michalowski, R. L. 1995. “Slope stability analysis: a kinematical approach.” Géotechnique 45 (2): 283–293. https://doi.org/10.1680/geot.1995.45.2.283.
Michalowski, R. L. 2002. “Stability charts for uniform slopes.” J. Geotech. Geoenviron. Eng. 128 (4): 351–355. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:4(351).
Michalowski, R. L., and T. Martel. 2011. “Stability charts for 3D failures of steep slopes subjected to seismic excitation.” J. Geotech. Geoenviron. Eng. 137 (2): 183–189. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000412.
Mollon, G., D. Dias, and A. H. Soubra. 2011. “Rotational failure mechanisms for the face stability analysis of tunnels driven by a pressurized shield.” Int. J. Numer. Anal. Meth. Geomech. 35 (12): 1363–1388. https://doi.org/10.1002/nag.962.
Nimbalkar, S. S., and D. Choudhury. 2007. “Sliding stability and seismic design of retaining wall by pseudo-dynamic method for passive case.” Soil Dyn. Earthquake Eng. 27 (6): 497–505. https://doi.org/10.1016/j.soildyn.2006.11.006.
Pain, A., D. Choudhury, and S. K. Bhattacharyya. 2015. “Seismic stability of retaining wall-soil sliding interaction using modified pseudo-dynamic method.” Géotechnique Lett. 5 (1): 56–61. https://doi.org/10.1680/geolett.14.00116.
Pain, A., D. Choudhury, and S. K. Bhattacharyya. 2017. “Seismic rotational stability of gravity retaining walls by modified pseudo-dynamic method.” Soil Dyn. Earthquake Eng. 94 (Mar): 244–253. https://doi.org/10.1016/j.soildyn.2017.01.016.
Pan, Q. J., and D. Dias. 2017. “Probabilistic evaluation of tunnel face stability in spatially random soils using sparse polynomial chaos expansion with global sensitivity analysis.” Acta Geotech. 12 (6): 1415–1429. https://doi.org/10.1007/s11440-017-0541-5.
Qin, C. B., and S. C. Chian. 2018a. “Kinematic analysis of seismic slope stability with a discretisation technique and pseudo-dynamic approach: a new perspective.” Géotechnique 68 (6): 492–503. https://doi.org/10.1680/jgeot.16.P.200.
Qin, C. B., and S. C. Chian. 2018b. “Bearing capacity analysis of a saturated non-uniform soil slope with discretization-based kinematic analysis.” Comput. Geotech. 96 (Apr): 246–257. https://doi.org/10.1016/j.compgeo.2017.11.003.
Qin, C. B., and S. C. Chian. 2018c. “New perspective on seismic slope stability analysis.” Int. J. Geomech. 18 (7): 06018013. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001170.
Qin, C. B., S. C. Chian, and S. Z. Du. 2019. “Revisiting seismic slope stability: intermediate or below-the-toe failure?” Géotechnique 69 (4): 344–354. https://doi.org/10.1680/jgeot.18.T.001.
Rajesh, B. G., and D. Choudhury. 2017. “Seismic passive earth resistance in submerged soils using modified pseudo-dynamic method with curved rupture surface.” Mar. Georesour. Geotechnol. 35 (7): 930–938. https://doi.org/10.1080/1064119X.2016.1260077.
Rathje, E. M., and G. Antonakos. 2011. “A unified model for predicting earthquake-induced sliding displacements of rigid and flexible slopes.” Eng. Geol. 122 (1–2): 51–60. https://doi.org/10.1016/j.enggeo.2010.12.004.
Rathje, E. M., and J. D. Bray. 1999. “An examination of simplified earthquake-induced displacement procedures for earth structures.” Can. Geotech. J. 36 (1): 72–87. https://doi.org/10.1139/cgj-36-1-72.
Steedman, R. S., and X. Zeng. 1990. “The influence of phase on the calculation of pseudo-static earth pressure on a retaining wall.” Géotechnique 40 (1): 103–112. https://doi.org/10.1680/geot.1990.40.1.103.
Yang, X. L. 2009. “Seismic bearing capacity of a strip footing on rock slopes.” Can. Geotech. J. 46 (8): 943–954. https://doi.org/10.1139/T09-038.
Yang, X. L., L. Li, and J. H. Yin. 2004. “Seismic and static stability analysis for rock slopes by a kinematical approach.” Géotechnique 54 (8): 543–549. https://doi.org/10.1680/geot.2004.54.8.543.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 19 • Issue 9 • September 2019
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Jul 28, 2018
Accepted: Mar 28, 2019
Published online: Jun 18, 2019
Published in print: Sep 1, 2019
Discussion open until: Nov 18, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.