Strength and Failure Characteristics of Rocklike Material Containing a Large-Opening Crack under Uniaxial Compression: Experimental and Numerical Studies
Publication: International Journal of Geomechanics
Volume 19, Issue 8
Abstract
A series of uniaxial compression experiments was conducted on rocklike specimens containing a large-opening crack to investigate the effect of inclination angle and length of crack on the uniaxial compressive strength (UCS) and failure mode. A particle flow code, based on the discrete element method, was used to simulate the propagation process and reveal the fracture mechanism of a preexisting crack with a large opening. The failure of these large-opening crack specimens was mainly caused by the development of shear secondary cracks and not by tensile wing cracks, although the shear cracks initiated from the crack tip after the tensile wing cracks. The preexisting large crack remained open after compression failure. The mean rupture angle was approximately 63.6°, and it was independent of the crack inclination angle and length. An increase in inclination angle from 0° to 90° or a decrease in crack length from 30 to 0 mm led to a nonlinear increase in UCS owing to the increase in effective shearing resistance area. The experimental results are in accordance with the numerical results, and they provide a significant understanding of the UCS and failure characteristics of rocks with large-opening cracks.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (Grants 41702291, 41702254, and 51574183), the Natural Science Foundation of Hubei Province (Grant 2018CFB613), and the Hubei Key Laboratory for Efficient Utilization and Agglomeration of Metallurgic Mineral Resources (2017zy005).
References
Afolagboye, L. O., J. He, and S. Wang. 2017. “Experimental study on cracking behaviour of moulded gypsum containing two non-parallel overlapping flaws under uniaxial compression.” Acta Mech. Sin. 33 (2): 394–405. https://doi.org/10.1007/s10409-016-0624-9.
Asadizadeh, M., M. Moosavi, M. F. Hossaini, and H. Masoumi. 2018. “Shear strength and cracking process of non-persistent jointed rocks: An extensive experimental investigation.” Rock Mech. Rock Eng. 51 (2): 415–428. https://doi.org/10.1007/s00603-017-1328-6.
ASTM. 2010. Standard test method for compressive strength and elastic moduli of intact rock core specimens under varying states of stress and temperatures. ASTM D7012-10. West Conshohocken, PA: ASTM.
Bahaaddini, M., P. Hagan, R. Mitra, and B. Hebblewhite. 2016. “Numerical study of the mechanical behavior of nonpersistent jointed rock masses.” Int. J. Geomech. 16 (1): 04015035. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000510.
Bahaaddini, M., G. Sharrock, and B. K. Hebblewhite. 2013. “Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression.” Comput. Geotech. 49 (Apr): 206–225. https://doi.org/10.1016/j.compgeo.2012.10.012.
Bi, J., X. Zhou, and X. Xu. 2017. “Numerical simulation of failure process of rock-like materials subjected to impact loads.” Int. J. Geomech. 17 (3): 04016073. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000769.
Bobet, A. 2000. “The initiation of secondary cracks in compression.” Eng. Fract. Mech. 66 (2): 187–219. https://doi.org/10.1016/S0013-7944(00)00009-6.
Bobet, A., and H. H. Einstein. 1998. “Fracture coalescence in rock-type materials under uniaxial and biaxial compression.” Int. J. Rock Mech. Min. Sci. 35 (7): 863–888. https://doi.org/10.1016/S0148-9062(98)00005-9.
Cao, P., T. Liu, C. Pu, and H. Lin. 2015. “Crack propagation and coalescence of brittle rock-like specimens with pre-existing cracks in compression.” Eng. Geol. 187 (Mar): 113–121.
Chen, Y. L., J. Ni, W. Shao, Y. C. Zhou, A. Javadi, and R. Azzam. 2012. “Coalescence of fractures under uni-axial compression and fatigue loading.” Rock Mech. Rock Eng. 45 (2): 241–249. https://doi.org/10.1007/s00603-011-0186-x.
Cheng, H., X. P. Zhou, J. Zhu, and Q. H. Qian. 2016. “The effects of crack openings on crack initiation, propagation and coalescence behavior in rock-like materials under uniaxial compression.” Rock Mech. Rock Eng. 49 (9): 3481–3494. https://doi.org/10.1007/s00603-016-0998-9.
Dyskin, A. V., E. Sahouryeh, R. J. Jewell, H. Joer, and K. B. Ustinov. 2003. “Influence of shape and locations of initial 3-D cracks on their growth in uniaxial compression.” Eng. Fract. Mech. 70 (15): 2115–2136. https://doi.org/10.1016/S0013-7944(02)00240-0.
Fan, X., P. H. S. W. Kulatilake, and X. Chen. 2015. “Mechanical behavior of rock-like jointed blocks with multi-non-persistent joints under uniaxial loading: A particle mechanics approach.” Eng. Geol. 190 (May): 17–32. https://doi.org/10.1016/j.enggeo.2015.02.008.
Fu, J. W., K. Chen, W. S. Zhu, X. Z. Zhang, and X. J. Li. 2016. “Progressive failure of new modelling material with a single internal crack under biaxial compression and the 3-D numerical simulation.” Eng. Fract. Mech. 165 (Oct): 140–152. https://doi.org/10.1016/j.engfracmech.2016.08.002.
Fu, J. W., X. Z. Zhang, W. S. Zhu, K. Chen, and J. F. Guan. 2017. “Simulating progressive failure in brittle jointed rock masses using a modified elastic-brittle model and the application.” Eng. Fract. Mech. 178 (Jun): 212–230. https://doi.org/10.1016/j.engfracmech.2017.04.037.
Germanovich, L. N., R. L. Salganik, A. V. Dyskin, and K. K. Lee. 1994. “Mechanisms of brittle fracture of rock with pre-existing cracks in compression.” Pure Appl. Geophys. 143 (1–3): 117–149. https://doi.org/10.1007/BF00874326.
Ghazvinian, A., V. Sarfarazi, W. Schubert, and M. Blumel. 2012. “A study of the failure mechanism of planar non-persistent open joints using PFC2D.” Rock Mech. Rock Eng. 45 (5): 677–693.
Gratchev, I., D. H. Kim, and C. K. Yeung. 2016. “Strength of rock-like specimens with pre-existing cracks of different length and width.” Rock Mech. Rock Eng. 49 (11): 4491–4496. https://doi.org/10.1007/s00603-016-1013-1.
Haeri, H., K. Shahriar, M. F. Marji, and P. Moarefvand. 2014. “Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression.” J. Cent. South Univ. 21 (6): 2404–2414. https://doi.org/10.1007/s11771-014-2194-y.
Hu, W., C. Y. Kwok, K. Duan, and T. Wang. 2018. “Parametric study of the smooth-joint contact model on the mechanical behavior of jointed rock.” Int. J. Numer. Anal. Methods Geomech. 42 (2): 358–376. https://doi.org/10.1002/nag.2751.
Huang, S., Q. Liu, Y. Liu, Z. Ye, and A. Cheng. 2018a. “Freezing strain model for estimating the unfrozen water content of saturated rock under low temperature.” Int. J. Geomech. 18 (2): 04017137. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001057.
Huang, S. B., Q. S. Liu, A. P. Cheng, and Y. Z. Liu. 2018b. “A statistical damage constitutive model under freeze-thaw and loading for rock and its engineering application.” Cold Reg. Sci. Technol. 145 (Jan): 142–150. https://doi.org/10.1016/j.coldregions.2017.10.015.
Huang, S. B., Q. S. Liu, Y. Z. Liu, Y. S. Kang, A. P. Cheng, and Z. Y. Ye. 2018c. “Frost heaving and frost cracking of elliptical cavities (fractures) in low-permeability rock.” Eng. Geol. 234 (Feb): 1–10. https://doi.org/10.1016/j.enggeo.2017.12.024.
Huang, S. B., Y. Z. Liu, Y. L. Guo, Z. L. Zhang, and Y. T. Cai. 2019. “Strength and failure characteristics of rock-like material containing single crack under freeze-thaw and uniaxial compression.” Cold Reg. Sci. Technol. 162 (Jun): 1–10. https://doi.org/10.1016/j.coldregions.2019.03.013.
Jin, J., P. Cao, Y. Chen, C. Pu, D. Mao, and X. Fan. 2017. “Influence of single flaw on the failure process and energy mechanics of rock-like material.” Comput. Geotech. 86 (Jun): 150–162. https://doi.org/10.1016/j.compgeo.2017.01.011.
Kim, J., and G. J. Moridis. 2015. “Numerical analysis of fracture propagation during hydraulic fracturing operations in shale gas systems.” Int. J. Rock Mech. Min. Sci. 76 (Jun): 127–137. https://doi.org/10.1016/j.ijrmms.2015.02.013.
Lee, H., and S. Jeon. 2011. “An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression.” Int. J. Solids Struct. 48 (6): 979–999. https://doi.org/10.1016/j.ijsolstr.2010.12.001.
Li, H., and L. N. Y. Wong. 2012. “Influence of flaw inclination angle and loading condition on crack initiation and propagation.” Int. J. Solids Struct. 49 (18): 2482–2499. https://doi.org/10.1016/j.ijsolstr.2012.05.012.
Liu, Q. S., J. Xu, X. W. Liu, J. D. Jiang, and B. Liu. 2015. “The role of flaws on crack growth in rock-like material assessed by AE technique.” Int. J. Fract. 193 (2): 99–115. https://doi.org/10.1007/s10704-015-0021-6.
Liu, X., Q. Liu, Y. Kang, and Y. Pan. 2018. “Improved nonlinear strength criterion for jointed rock masses subject to complex stress states.” Int. J. Geomech. 18 (3): 04017164. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001072.
Ma, G. W., Q. Q. Dong, L. F. Fan, and J. W. Gao. 2018. “An investigation of non-straight fissures cracking under uniaxial compression.” Eng. Fract. Mech. 191 (Mar): 300–310. https://doi.org/10.1016/j.engfracmech.2017.12.017.
Manouchehrian, A., and M. F. Marji. 2012. “Numerical analysis of confinement effect on crack propagation mechanism from a flaw in a pre-cracked rock under compression.” Acta Mech. Sin. 28 (5): 1389–1397. https://doi.org/10.1007/s10409-012-0145-0.
Manouchehrian, A., M. Sharifzadeh, M. F. Marji, and J. Gholamnejad. 2014. “A bonded particle model for analysis of the flaw orientation effect on crack propagation mechanism in brittle materials under compression.” Arch. Civ. Mech. Eng. 14 (1): 40–52. https://doi.org/10.1016/j.acme.2013.05.008.
Ning, J. G., J. Wang, J. Q. Jiang, S. C. Hu, L. S. Jiang, and X. S. Liu. 2018. “Estimation of crack initiation and propagation thresholds of confined brittle coal specimens based on energy dissipation theory.” Rock Mech. Rock Eng. 51 (1): 119–134. https://doi.org/10.1007/s00603-017-1317-9.
Pakzad, R., S. Wang, and S. Sloan. 2018. “Numerical study of the failure response and fracture propagation for rock specimens with preexisting flaws under compression.” Int. J. Geomech. 18 (7): 04018070. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001172.
Park, C. H., and A. Bobet. 2009. “Crack coalescence in specimens with open and closed flaws: A comparison.” Int. J. Rock Mech. Min. Sci. 46 (5): 819–829. https://doi.org/10.1016/j.ijrmms.2009.02.006.
Park, C. H., and A. Bobet. 2010. “Crack initiation, propagation and coalescence from frictional flaws in uniaxial compression.” Eng. Fract. Mech. 77 (14): 2727–2748. https://doi.org/10.1016/j.engfracmech.2010.06.027.
Park, H. J., J. H. Lee, K. M. Kim, and J. G. Um. 2016. “Assessment of rock slope stability using GIS-based probabilistic kinematic analysis.” Eng. Geol. 203 (Mar): 56–69. https://doi.org/10.1016/j.enggeo.2015.08.021.
Petit, J. P., and M. Barquins. 1988. “Can natural faults propagate under mode II conditions?” Tectonics 7 (6): 1243–1256. https://doi.org/10.1029/TC007i006p01243.
Wang, L., Y. C. Mao, J. S. Ye, J. H. Yang, and D. H. Rui. 2013. “Models for microcracks extension and damage evolution based on number series of microdefects nucleation.” [In Chinese.] Eng. Mech. 30 (8): 278–285.
Wasantha, P. L. P., and P. G. Ranjith. 2014. “The Taguchi approach to the evaluation of the influence of different testing conditions on the mechanical properties of rock.” Environ. Earth Sci. 72 (1): 79–89.
Wong, L. N. Y., and H. H. Einstein. 2009a. “Crack coalescence in molded gypsum and Carrara marble: Part 1. Macroscopic observations and interpretation.” Rock Mech. Rock Eng. 42 (3): 475–511. https://doi.org/10.1007/s00603-008-0002-4.
Wong, L. N. Y., and H. H. Einstein. 2009b. “Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression.” Int. J. Rock Mech. Min. Sci. 46 (2): 239–249. https://doi.org/10.1016/j.ijrmms.2008.03.006.
Wong, R. H., Y. S. H. Guo, L. Y. Li, K. T. Chau, W. S. Zhu, and S. C. Li. 2006. “Anti-wing crack growth from surface flaw in real rock under uniaxial compression.” In Fracture of nano and engineering materials and structures, edited by E. E. Gdoutos, 825–826. Dordrecht Netherlands: Springer.
Xie, Y., P. Cao, J. Liu, and L. Dong. 2016. “Influence of crack surface friction on crack initiation and propagation: A numerical investigation based on extended finite element method.” Comput. Geotech. 74 (Apr): 1–14. https://doi.org/10.1016/j.compgeo.2015.12.013.
Xu, J., Z. Y. Zheng, X. C. Xiao, and Z. X. Li. 2018. “Crack propagation and coalescence due to dual non-penetrating surface flaws and their effect on the strength of rock-like material.” J. Geophys. Eng. 15 (3): 938–951. https://doi.org/10.1088/1742-2140/aaa985.
Yang, Q., Y. W. Zan, and L. G. Xie. 2018. “Comparative analysis of the nonlinear unified strength criterion for rocks and other three-dimensional Hoek–Brown strength criteria.” Geomech. Geophys. Geo-Energy Geo-Resour. 4 (1): 29–37. https://doi.org/10.1007/s40948-017-0072-4.
Yang, S. Q., Y. H. Dai, L. J. Han, and Z. Q. Jin. 2009. “Experimental study on mechanical behavior of brittle marble samples containing different flaws under uniaxial compression.” Eng. Fract. Mech. 76 (12): 1833–1845. https://doi.org/10.1016/j.engfracmech.2009.04.005.
Yang, S. Q., Y. H. Huang, H. W. Jing, and X. R. Liu. 2014. “Discrete element modeling on fracture coalescence behavior of red sandstone containing two unparallel fissures under uniaxial compression.” Eng. Geol. 178 (Aug): 28–48. https://doi.org/10.1016/j.enggeo.2014.06.005.
Yang, S. Q., and H. W. Jing. 2011. “Strength failure and crack coalescence behavior of brittle sandstone samples containing a single fissure under uniaxial compression.” Int. J. Fract. 168 (2): 227–250. https://doi.org/10.1007/s10704-010-9576-4.
Yang, X., P. Kulatilake, X. Chen, H. Jing, and S. Yang. 2016. “Particle flow modeling of rock blocks with nonpersistent open joints under uniaxial compression.” Int. J. Geomech. 16 (6): 04016020. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000649.
Zhang, X. P., and L. N. Y. Wong. 2012. “Cracking processes in rock-like material containing a single flaw under uniaxial compression: A numerical study based on parallel bonded-particle model approach.” Rock Mech. Rock Eng. 45 (5): 711–737.
Zhang, X. P., and L. N. Y. Wong. 2014. “Displacement field analysis for cracking processes in bonded-particle model.” Bull. Eng. Geol. Environ. 73 (1): 13–21. https://doi.org/10.1007/s10064-013-0496-1.
Zhang, X. P., L. N. Y. Wong, and S. Wang. 2015. “Effects of the ratio of flaw size to specimen size on cracking behavior.” Bull. Eng. Geol. Environ. 74 (1): 181–193. https://doi.org/10.1007/s10064-014-0596-6.
Zhang, X. P., Q. Zhang, and S. Wu. 2017. “Acoustic emission characteristics of the rock-like material containing a single flaw under different compressive loading rates.” Comput. Geotech. 83 (Mar): 83–97. https://doi.org/10.1016/j.compgeo.2016.11.003.
Zhao, Y., L. Zhang, W. Wang, C. Pu, W. Wan, and J. Tang. 2016. “Cracking and stress–strain behavior of rock-like material containing two flaws under uniaxial compression.” Rock Mech. Rock Eng. 49 (7): 2665–2687. https://doi.org/10.1007/s00603-016-0932-1.
Zhou, X. P., J. Z. Zhang, and L. N. Y. Wong. 2018. “Experimental study on the growth, coalescence and wrapping behaviors of 3D cross-embedded flaws under uniaxial compression.” Rock Mech. Rock Eng. 51 (5): 1379–1400. https://doi.org/10.1007/s00603-018-1406-4.
Zhou, Z. L., L. H. Tan, W. Z. Cao, Z. Y. Zhou, and X. Cai. 2017. “Fracture evolution and failure behaviour of marble specimens containing rectangular cavities under uniaxial loading.” Eng. Fract. Mech. 184 (Oct): 183–201. https://doi.org/10.1016/j.engfracmech.2017.08.029.
Zou, C., L. N. Y. Wong, J. J. Loo, and B. S. Gan. 2016. “Different mechanical and cracking behaviors of single-flawed brittle gypsum specimens under dynamic and quasi-static loadings.” Eng. Geol. 201 (Feb): 71–84. https://doi.org/10.1016/j.enggeo.2015.12.014.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 19 • Issue 8 • August 2019
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Jul 18, 2018
Accepted: Mar 15, 2019
Published online: May 29, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 29, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.