Stress Responses Associated with Earth Pressure Balance Shield Tunneling in Dry Granular Ground Using the Discrete-Element Method
Publication: International Journal of Geomechanics
Volume 19, Issue 7
Abstract
This study investigates stress responses associated with earth pressure balance (EPB) shield tunneling in dry granular ground. A numerical model using the discrete-element method (DEM) was employed to simulate both the advancement of EPB shield and the discharge of muck from the chamber. Some critical ground stress variations associated with tunneling were thus effectively captured. Numerical results show that the responses of the principal stress in dry granular ground, namely changes of magnitude and rotation angle, significantly depend on both the discharge rate of muck and the distance from tunnel face. The average value and distribution features of stress at the tunnel face are also subjected to the discharge rates of muck in the shield chamber. To be specific, in the case without muck discharge out of the chamber, the average stress at the tunnel face first increases with increases in advancement distance and subsequently tends toward a stable value. But for the case of discharging muck with an upper limit rate, the stress first decreases rapidly to a minimum value and subsequently increases to a stable value. Further, a significant stress release area is also found in the proximity of the tunnel face, and the changes in the contact forces among soil particles are far less than those in the case without muck discharge.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial supports from the National Key Research and Development Program of China (2017YFB1201204) and the National Natural Science Foundation of China (51778637) are acknowledged and appreciated.
References
Cao, W., R. Wang, and J.-M. Zhang. 2017. “Formulation of anisotropic strength criteria for cohesionless granular materials.” Int. J. Geomech. 17 (7): 04016151. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000861.
Chambon, P., and J. F. Corté. 1994. “Shallow tunnels in cohesionless soil: Stability of tunnel face.” J. Geotech. Eng. 120 (7): 1148–1164. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:7(1148).
Chang, K.-T., L. Ge, and S. Sture. 2009. “Evaluation of the stiffness and volumetric behaviors of medium dense sand under principal stress rotations.” J. Test. Eval. 38 (3): 319–323. https://doi.org/10.1520/JTE102635.
Chen, R. P., L. J. Tang, D. S. Ling, and Y. M. Chen. 2011a. “Face stability analysis of shallow shield tunnels in dry sandy ground using the discrete element method.” Comput. Geotech. 38 (2): 187–195. https://doi.org/10.1016/j.compgeo.2010.11.003.
Chen, R. P., J. Zhu, W. Liu, and X. W. Tang. 2011b. “Ground movement induced by parallel EPB tunnels in silty soils.” Tunnelling Underground Space Technol. 26 (1): 163–171. https://doi.org/10.1016/j.tust.2010.09.004.
Coetzee, C. J. 2016. “Calibration of the discrete element method and the effect of particle shape.” Powder Technol. 297 (Sep): 50–70. https://doi.org/10.1016/j.powtec.2016.04.003.
Diederichs, M., P. Kaiser, and E. Eberhardt. 2004. “Damage initiation and propagation in hard rock during tunnelling and the influence of near-face stress rotation.” Int. J. Rock Mech. Min. Sci. 41 (5): 785–812. https://doi.org/10.1016/j.ijrmms.2004.02.003.
Eberhardt, E. 2001. “Numerical modelling of three-dimension stress rotation ahead of an advancing tunnel face.” Int. J. Rock Mech. Min. Sci. 38 (4): 499–518. https://doi.org/10.1016/S1365-1609(01)00017-X.
Feng, Y. T., K. Han, D. R. J. Owen, and J. Loughran. 2009. “On upscaling of discrete element models: Similarity principles.” Eng. Computations 26 (6): 599–609. https://doi.org/10.1108/02644400910975405.
Feng, Y. T., and D. R. J. Owen. 2014. “Discrete element modelling of large scale particle systems—I: Exact scaling laws.” Comput. Part. Mech. 1 (2): 159–168. https://doi.org/10.1007/s40571-014-0010-y.
Garnier, J., C. Gaudin, S. M. Springman, P. J. Culligan, D. Goodings, D. Konig, B. Kutter, R. Phillips, M. F. Randolph, and L. Thorel. 2007. “Catalogue of scaling laws and similitude questions in geotechnical centrifuge modeling.” Int. J. Phys. Modell. Geotech. 7 (3): 1–23. https://doi.org/10.1680/ijpmg.2007.070301.
Gutierrez, M., K. Ishihara, and I. Towhata. 1993. “Model for the deformation of sand during rotation of principal stress directions.” Soils Found. 33 (3): 105–117. https://doi.org/10.3208/sandf1972.33.3_105.
Huang, F., H. Zhu, S. Jiang, and B. Liang. 2017. “Excavation-damaged zone around tunnel surface under different release ratios of displacement.” Int. J. Geomech. 17 (4): 04016094. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000752.
Itasca Consulting Group (Itasca). 2004. PFC2D (Particle Flow Code in 2 Dimensions) Version 3.1 User’s Manual. Minneapolis, MN: Itasca Consulting Group.
Jiang, M., Z. Shen, and L. Li. 2016. “Noncoaxial behavior of a highly angular granular material subjected to stress variations in simple vertical excavation.” Int. J. Geomech. 16 (2): 04015040. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000531.
Jiang, M., and Z. Yin. 2014. “Influence of soil conditioning on ground deformation during longitudinal tunneling.” C. R. Mec. 342 (3): 189–197. https://doi.org/10.1016/j.crme.2014.02.002.
Karim, A. M. 2007. “Three dimensional discrete element modeling of tunneling in sand.” Ph.D. thesis, Faculty of Engineering, Alberta Univ.
Kim, S. H., and F. Tonon. 2010. “Face stability and required support pressure for TBM driven tunnels with ideal face membrane–Drained case.” Tunnelling Underground Space Technol. 25 (5): 526–542. https://doi.org/10.1016/j.tust.2010.03.002.
Koizumi, A. 2008. The investigation, design, and construction of shield tunnel. [In Chinese.] Beijing: China Architecture and Building Press.
Kumar, R. P., and D. N. Singh. 2012. “Geotechnical centrifuge modeling of chloride diffusion through soils.” Int. J. Geomech. 12 (3): 327–332. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000139.
Langmaack, L. 2000. “Advanced technology of soil conditioning in EPB shield tunnelling.” In Proc., North American Tunneling Congress, 525–542. Rotterdam, Netherlands: A. A. Balkema.
Liu, P., S. Wang, L. Ge, M. Thewes, J. Yang, and Y. Xia. 2018. “Changes of Atterberg limits and electrochemical behaviors of clays with dispersants as conditioning agents for EPB shield tunneling.” Tunnelling Underground Space Technol. 73 (Mar): 244–251. https://doi.org/10.1016/j.tust.2017.12.026.
Maynar, M. J., and L. E. Rodríguez. 2005. “Discrete numerical model for analysis of earth pressure balance tunnel excavation.” J. Geotech. Geoenviron. Eng. 131 (10): 1234–1242. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:10(1234).
Peters, J. F., M. Muthuswamy, J. Wibowo, and A. Tordesillas. 2005. “Characterization of force chains in granular material.” Phys Rev. E 72 (4 Pt 1): 041307. https://doi.org/10.1103/PhysRevE.72.041307.
Shi, H., H. Yang, G. Gong, and L. Wang. 2011. “Determination of the cutterhead torque for EPB shield tunneling machine.” Autom. Constr. 20 (8): 1087–1095. https://doi.org/10.1016/j.autcon.2011.04.010.
Sugimoto, M., and A. Sramoon. 2002. “Theoretical model of shield behavior during excavation. I: Theory.” J. Geotech. Geoenviron. Eng. 128 (2): 138–155. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:2(138).
Taylor, R. N. 1995. Geotechnical centrifuge technology. London: Taylor & Francis.
Terzaghi, K. 1936. “Stress distribution in dry and in saturated sand above a yielding trap-door.” In Vol. 1 of Proc., Int. Conf. on Soil Mechanics and Foundation Engineering, 307–316. Rotterdam, Netherlands: A. A. Balkema.
Terzaghi, K., R. B. Peck, and G. Mesri. 1996. Soil mechanics in engineering practice. New York: Wiley.
Wang, M., Y. T. Feng, G. N. Pande, A. H. C. Chan, and W. X. Zuo. 2017. “Numerical modelling of fluid-induced soil erosion in granular filters using a coupled bonded particle lattice Boltzmann method.” Comput. Geotech. 82 (Feb): 134–143. https://doi.org/10.1016/j.compgeo.2016.10.006.
Wang, M., Y. T. Feng, and C. Y. Wang. 2016a. “Coupled bonded particle and lattice Boltzmann method for modelling fluid–solid interaction.” Int. J. Numer. Anal. Methods Geomech. 40 (10): 1383–1401. https://doi.org/10.1002/nag.2481.
Wang, S., R. Luna, and R. W. Stephenson. 2011. “A slurry consolidation approach to reconstitute low-plasticity silt specimens for laboratory triaxial testing.” Geotech. Test. J. 34 (4): 288–296. https://doi.org/10.1520/GTJ103529.
Wang, S., R. Luna, and J. Yang. 2016b. “Reexamination of effect of plasticity on liquefaction resistance of low-plasticity fine-grained soils and its potential application.” Acta Geotech. 11 (5): 1209–1216. https://doi.org/10.1007/s11440-015-0394-8.
Wang, Y., Y. Gao, L. Guo, and Z. Yang. 2018. “Influence of intermediate principal stress and principal stress direction on drained behavior of natural soft clay.” Int. J. Geomech. 18 (1): 04017128. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001042.
Wu, L., T. Guan, and L. Lei. 2013. “Discrete element model for performance analysis of cutterhead excavation system of EPB machine.” Tunnelling Underground Space Technol. 37 (Aug): 37–44. https://doi.org/10.1016/j.tust.2013.03.003.
Ye, X., S. Wang, J. Yang, D. Sheng, and C. Xiao. 2017. “Soil conditioning for EPB shield tunneling in argillaceous siltstone with high content of clay minerals: Case study.” Int. J. Geomech. 17 (4): 05016002. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000791.
Zhang, D., X. Huang, and Y. Zhao. 2015. “Numerical study on the effect of coarse-aggregate morphology on shear performance.” J. Test. Eval. 43 (3): 554–561. https://doi.org/10.1520/JTE20130067.
Zhang, Z. X., X. Y. Hua, and K. D. Scott. 2011. “A discrete numerical approach for modeling face stability in slurry shield tunnelling in soft soils.” Comput. Geotech. 38 (1): 94–104. https://doi.org/10.1016/j.compgeo.2010.10.011.
Zhu, Z., Y. Li, J. Xie, and B. Liu. 2015. “The effect of principal stress orientation on tunnel stability.” Tunnelling Underground Space Technol. 49 (Jun): 279–286. https://doi.org/10.1016/j.tust.2015.05.009.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Jan 18, 2018
Accepted: Dec 28, 2018
Published online: Apr 16, 2019
Published in print: Jul 1, 2019
Discussion open until: Sep 16, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.