Micromechanical Particle Interactions in Railway Ballast through DEM Simulations of Direct Shear Tests
Publication: International Journal of Geomechanics
Volume 19, Issue 5
Abstract
Particle shape properties can significantly affect the load response behavior and field performance of the uniformly graded ballast layer in railway track structures. Particle contact and the related micromechanical behavior of the unbound aggregate ballast layer assembly influenced by the particle shape properties have not yet been thoroughly investigated. In this study, an aggregate imaging and particle shape-analysis approach based on computer vision technology was introduced to calculate aggregate morphological indices and construct polyhedral discrete elements with shapes close to realistic ballast aggregate particles. A model of direct shear test on railway ballast based on the discrete-element method (DEM) was developed using generated nonbreakable discrete elements as individual ballast particles and validated by closely matching the predicted shear stress–strain behavior with laboratory test results. The DEM model simulation predictions were then used to investigate the relations between microscale interactions of individual ballast particles, particle size effects in relation to shear box test equipment dimensions, and macroscale behavior trends of the aggregate assemblies. Stronger particle interactions and higher coordination numbers were observed as the imaging-based angularity index (AI) and flat and elongated (F&E) ratio increased. Furthermore, limiting individual particle movement was shown to increase strength and provide greater resistance to failure and deformation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge financial support from the National Natural Science Foundation of China (Grant 51678524), Advanced Newton Fellowship of Royal Society, UK (NA140060), and Distinguished Young Scientist Program of Zhejiang University (LR16E080002). Professor Youssef Hashash at the University of Illinois at Urbana-Champaign provided great support of BLOKS3D DEM program. All the help is greatly appreciated.
References
Abedi, S., and A. A. Mirghasemi. 2011. “Particle shape consideration in numerical simulation of assemblies of irregularly shaped particles.” Particuology 9 (4): 387–397. https://doi.org/10.1016/j.partic.2010.11.005.
ASTM. 1990. Standard test method for direct shear tests of soils under consolidated drained conditions. ASTM D3080-90. West Conshohocken, PA: ASTM.
ASTM. 1995. Standard test method for flat particles, elongated particles, or flat and elongated particles in coarse aggregate. ASTM D 4791. West Conshohocken, PA: ASTM.
Bagherzadeh-Khalkhali, A., and A. A. Mirghasemi. 2009. “Numerical and experimental direct shear tests for coarse-grained soils.” Particuology 7 (1): 83–91. https://doi.org/10.1016/j.partic.2008.11.006.
Cho, G. C., J. Dodds, and J. C. Santamarina. 2006. “Particle shape effects on packing density, stiffness, and strength: Natural and crushed sands.” J. Geotech. Geoenviron. 132 (5): 591–602. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:5(591).
Coetzee, C. J. 2016. “Calibration of the discrete element method and the effect of particle shape.” Powder Technol. 297: 50–70. https://doi.org/10.1016/j.powtec.2016.04.003.
Cui, L., and C. O'Sullivan. 2006. “Exploring the macro- and micro-scale response of an idealised granular material in the direct shear apparatus.” Géotechnique 56 (7): 455–468. https://doi.org/10.1680/geot.2006.56.7.455.
Cundall, P. A., and O. D. L. Strack. 1979. “A discrete numerical model for granular assemblies.” Géotechnique 29 (1): 47–65.
Ghaboussi, J., and R. Barbosa. 1990. “Three-dimensional discrete element method for granular materials.” Int. J. Numer. Anal. Methods Geomech. 14 (7): 451–472. https://doi.org/10.1002/nag.1610140702.
Härtl, J., and J. Y. Ooi. 2008. “Experiments and simulations of direct shear tests: Porosity, contact friction and bulk friction.” Granular Matter 10 (4): 263–271. https://doi.org/10.1007/s10035-008-0085-3.
Härtl, J., and J. Y. Ooi. 2011. “Numerical investigation of particle shape and particle friction on limiting bulk friction in direct shear tests and comparison with experiments.” Powder Technol. 212 (1): 231–239. https://doi.org/10.1016/j.powtec.2011.05.022.
Holubec, I., and E. D'Appolonia. 1973. “Effect of particle shape on the engineering properties of granular soils.” ASTM Spec. Tech. Publ. 523 (1): 304–318.
Hossain, Z., B. Indraratna, F. Darve, and P. Thakur. 2007. “DEM analysis of angular ballast breakage under cyclic loading.” Geomech. Geoeng. 2 (3): 175–181. https://doi.org/10.1080/17486020701474962.
Huang, H. 2010. “Discrete element modeling of railroad ballast using imaging based aggregate morphology characterization.” Ph.D. thesis, Univ. of Illinois at Urbana-Champaign.
Huang, H., and E. Tutumluer. 2014. “Image-aided element shape generation method in discrete-element modeling for railroad ballast.” J. Mater. Civ. Eng. 26 (3): 527–535. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000839.
Huang, H., E. Tutumluer, and W. Dombrow. 2009. “Laboratory characterization of fouled railroad ballast behavior.” Transp. Res. Rec. 2117 (1): 93–101. https://doi.org/10.3141/2117-12.
Indraratna, B., N. T. Ngo, C. Rujikiatkamjorn, and J. S. Vinod. 2014. “Behavior of fresh and fouled railway ballast subjected to direct shear testing: Discrete element simulation.” Int. J. Geomech. 14 (1): 34–44. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000264.
Indraratna, B., W. Salim, and C. Rujikiatkamjorn. 2011. Advanced rail geotechnology–Ballasted track. London: CRC Press, Taylor & Francis Group.
Indraratna, B., P. K. Thakur, and J. S. Vinod. 2010. “Experimental and numerical study of railway ballast behavior under cyclic loading.” Int. J. Geomech. 10 (4): 136–144. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000055.
Lobo-Guerrero, S., and L. E. Vallejo. 2006. “Discrete element method analysis of railtrack ballast degradation during cyclic loading.” Granular Matter 8 (3–4): 195–204. https://doi.org/10.1007/s10035-006-0006-2.
Lu, M., and G. R. McDowell. 2007. “The importance of modelling ballast particle shape in the discrete element method.” Granular Matter 9 (1–2): 69–80. https://doi.org/10.1007/s10035-006-0021-3.
Lu, M., and G. R. McDowell. 2010. “Discrete element modelling of railway ballast under monotonic and cyclic triaxial loading.” Géotechnique 60 (6): 459–467. https://doi.org/10.1680/geot.2010.60.6.459.
Masad, E., T. Al-Rousan, J. Button, D. Little, and E. Tutumluer. 2005. Test methods for characterizing aggregate shape, texture and angularity. National Cooperative Highway Research Program (NCHRP) Rep. 555. Washington, DC:Transportation Research Board of the National Academies.
McDowell, G. R., and H. Li. 2016. “Discrete element modelling of scaled railway ballast under triaxial conditions.” Granular Matter 18 (3): 1–10.
Mirghasemi, A. A., and M. Naeij. 2015. “The effect of initial elongation of elliptical particles on macro–micromechanical behavior during direct shear test.” Procedia Eng. 102: 1476–1483. https://doi.org/10.1016/j.proeng.2015.01.281.
Nezami, E. G. 2007. “Three-dimensional discrete element simulation of granular materials using polyhedral particles.” Ph.D. thesis, Univ. of Illinois at Urbana-Champaign.
Nezami, E. G., Y. M. A. Hashash, D. W. Zhao, and J. Ghaboussi. 2004. “A fast contact detection algorithm for 3-D discrete element method.” Comput. Geotech. 31 (7): 575–587. https://doi.org/10.1016/j.compgeo.2004.08.002.
Nezami, E. G., Y. M. A. Hashash, D. W. Zhao, and J. Ghaboussi. 2006. “Shortest link method for contact detection in discrete element method.” Int. J. Numer. Anal. Methods Geomech. 30 (8): 783–801. https://doi.org/10.1002/nag.500.
Ngoc Trung, N., B. Indraratna, and C. Rujikiatkamjorn. 2014. “DEM simulation of the behaviour of geogrid stabilised ballast fouled with coal.” Comput. Geotech. 55: 224–231. https://doi.org/10.1016/j.compgeo.2013.09.008.
Otsu, N. 1979. “A threshold selection method from gray-level histograms.” IEEE Trans. Syst. Man Cybern. 9 (1): 62–66. https://doi.org/10.1109/TSMC.1979.4310076.
Pan, T. Y., and E. Tutumluer. 2007. “Quantification of coarse aggregate surface texture using image analysis.” J. Test. Eval. 35 (2): 177–186.
Qian, Y., S. J. Lee, E. Tutumluer, Y. M. A. Hashash, and J. Ghaboussi. 2018. “Role of initial particle arrangement in ballast mechanical behavior.” Int. J. Geomech. 18 (3): 04017158. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001074.
Rao, C., E. Tutumluer, and I. T. Kim. 2002. “Quantification of coarse aggregate angularity based an image analysis.” In Proc., 81st Annual Meeting of the Transportation-Research-Board, 117–124. Washington, DC: Transportation Research Board NATL Research Council. https://doi.org/10.3141/1787-13.
Rao, C., E. Tutumluer, and J. A. Stefanski. 2001. “Coarse aggregate shape and size properties using a new image analyzer.” J. Test. Eval. 29 (5): 461–471. https://doi.org/10.1520/JTE12276J.
Sevi, A., and L. Ge. 2012. “Cyclic behaviors of railroad ballast within the parallel gradation scaling framework.” J. Mater. Civ. Eng. 24 (7): 797–804. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000460.
Stark, T. D., R. H. Swan, and Z. H. Yuan. 2014. “Ballast direct shear testing.” In Proc., ASME Joint Rail Conf., 1–10. New York: American Society of Mechanical Engineers.
Sun, Y., B. Indraratna, J. P. Carter, T. Marchant, and S. Nimbalkar. 2017. “Application of fractional calculus in modelling ballast deformation under cyclic loading.” Comput. Geotech. 82: 16–30. https://doi.org/10.1016/j.compgeo.2016.09.010.
Tutumluer, E., H. Huang, and X. Bian. 2012. “Geogrid‐aggregate interlock mechanism investigated through aggregate imaging-based discrete element modeling approach.” Int. J. Geomech. 12 (4): 391–398. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000113.
Tutumluer, E., H. Huang, Y. Hashash, and J. Ghaboussi. 2007. “Discrete element modeling of railroad ballast settlement.” In Proc., AREMA Annual Conf., 1–21. Lanham, MD: American Railway Engineering and Maintenance-of-Way Association.
Tutumluer, E., and T. Y. Pan. 2008. “Aggregate morphology affecting strength and permanent deformation behavior of unbound aggregate materials.” J. Mater. Civ. Eng. 20 (9): 617–627. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:9(617).
Tutumluer, E., Y. Qian, Y. M. Hashash, J. Ghaboussi, and D. D. Davis. 2013. “Discrete element modelling of ballasted track deformation behaviour.” Int. J. Rail Transp. 1 (1–2): 57–73. https://doi.org/10.1080/23248378.2013.788361.
Wang, J., and M. Gutierrez. 2010. “Discrete element simulations of direct shear specimen scale effects.” Géotechnique 60 (5): 395–409. https://doi.org/10.1680/geot.2010.60.5.395.
Zeghal, M. 2004. “Discrete-element method investigation of the resilient behavior of granular materials.” J. Transp. Eng. 130 (4): 503–509. https://doi.org/10.1061/(ASCE)0733-947X(2004)130:4(503).
Zhang, X., C. Zhao, and W. Zhai. 2017. “Dynamic behavior analysis of high-speed railway ballast under moving vehicle loads using discrete element method.” Int. J. Geomech. 17 (7): 04016157. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000871.
Zhao, D. W. 2006. “Three-dimensional discrete element simulation for granular materials.” Ph.D. thesis, Univ. of Illinois at Urbana-Champaign.
Zhao, S., N. Zhang, X. Zhou, and L. Zhang. 2017. “Particle shape effects on fabric of granular random packing.” Powder Technol. 310: 175–186. https://doi.org/10.1016/j.powtec.2016.12.094.
Zhao, S., X. Zhou, and W. Liu. 2015. “Discrete element simulations of direct shear tests with particle angularity effect.” Granular Matter 17 (6): 793–806. https://doi.org/10.1007/s10035-015-0593-x.
Zheng, J., and R. D. Hryciw. 2015. “Traditional soil particle sphericity, roundness and surface roughness by computational geometry.” Géotechnique 65 (6): 494–506. https://doi.org/10.1680/geot.14.P.192.
Zhou, C., and J. Y. Ooi. 2009. “Numerical investigation of progressive development of granular pile with spherical and non-spherical particles.” Mech. Mater. 41 (6): 707–714. https://doi.org/10.1016/j.mechmat.2009.01.017.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Jan 15, 2018
Accepted: Oct 31, 2018
Published online: Mar 5, 2019
Published in print: May 1, 2019
Discussion open until: Aug 5, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.