Dilatancy Equation for Rockfill Materials under Three-Dimensional Stress Conditions
Publication: International Journal of Geomechanics
Volume 19, Issue 5
Abstract
The intermediate principal stress ratio b has a significant influence on the dilatancy behaviors of rockfill materials. The dilatancy equation is defined as a function of the dilatancy dg and the stress ratio η. To investigate the applicability of a dilatancy equation when considering the influence of the b-value, a series of true triaxial tests including constant b-value (CB) tests and plane strain tests were performed. The results of the CB tests indicated that the stress ratio at the critical state, Mc, remarkably decreases with increasing b-value. By comparing the results with three widely used interpolation functions, a newly proposed interpolation function was suggested to express the relationships between the material constants of the dilatancy equation, i.e., Mc, A, and C, and the Lode angle θ (b-value). Additionally, the predictions of the dilatancy equation considering b-value agreed well with the rearranged test data of the constant-b and plane strain rockfill specimens. As a result, the dilatancy equation and the proposed interpolation function are believed to well express the dilatancy behaviors of rockfill materials under three-dimensional stress conditions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support from the National Key R&D Program of China (2017YFC0404801), research Grant 51479052 from the Natural Science Foundation of China, the Fundamental Research Funds for the Central Universities (2018B42414), and research Grant GG201705 from the Key Technologies R&D Program of the Henan water conservancy.
References
Gudehus, G. 1977. Finite elements in geomechanics. London: Wiley.
Guo, W. L., and J. G. Zhu. 2017. “Particle breakage and stress dilatancy in drained shear of rockfills.” Géotechnique Lett. 7 (4): 304–308. https://doi.org/10.1680/jgele.17.00099.
Honkanadavar, N., and K. Sharma. 2014. “Testing and modeling the behavior of riverbed and blasted quarried rockfill materials.” Int. J. Geomech. 14 (6): 04014028. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000378.
Jia, Y., B. Xu, S. Chi, B. Xiang, and Y. Zhou. 2017. “Research on the particle breakage of rockfill materials during triaxial tests.” Int. J. Geomech. 17 (10): 04017085. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000977.
Jefferies, M. G. 1993. “Nor-Sand: A simple critical state model for sand.” Géotechnique 43 (1): 91–103. https://doi.org/10.1680/geot.1993.43.1.91.
Lade, P., and J. Duncan. 1973. “Cubical triaxial tests on cohesionless soil.” J. Soil Mech. Found. Div. 99 (10): 793–812.
Li, X. S. 2002. “A sand model with state-dependent dilatancy.” Géotechnique 52 (3): 173–186. https://doi.org/10.1680/geot.2002.52.3.173.
Ma, G., J. Y. Liu, X. L. Chang, and W. Zhou. 2016. “Non-coaxiality and dilatancy of rockfill materials under true triaxial stress condition.” [In Chinese.] J. Central South Univ. 47 (5): 1697–1707.
Rowe, P. W. and G. I. Taylor. 1962. “The stress-dilatancy relation for the static equilibrium of an assembly of particles in contact.” Proc. R. Soc. London, Ser. A 269 (1339): 500–527.
Salim, W., and B. Indraratna. 2004. “A new elastoplastic constitutive model for coarse granular aggregates incorporating particle breakage.” Can. Geotech. J. 41 (4): 657–671. https://doi.org/10.1139/t04-025.
Shi, W. C. 2008. “True triaxial tests on coarse-grained soils and study on constitutive model.” [In Chinese.] Doctoral dissertation, Hohai Univ.
Shi, W. C., J. G. Zhu, C. F. Chiu, and H. L. Liu. 2010. “Strength and deformation behaviour of coarse-grained soil by true triaxial tests.” J. Central South Univ. Technol. 17 (5): 1095–1102. https://doi.org/10.1007/s11771-010-0602-5.
Sun, Y., Y. Xiao, and K. F. Hanif. 2015. “Fractional order modelling of the cumulative deformation of granular soils under cyclic loading.” Acta Mech. Solida Sin. 28 (6): 647–658. https://doi.org/10.1016/S0894-9166(16)30006-4.
Taiebat, M., and Y. F. Dafalias. 2008. “SANISAND: Simple anisotropic sand plasticity model.” Int. J. Numer. Anal. Methods Geomech. 32 (8): 915–948. https://doi.org/10.1002/nag.651.
Ueng, T. S., and T. J. Chen. 2000. “Energy aspects of particle breakage in drained shear of sands.” Géotechnique 50 (1): 65–72. https://doi.org/10.1680/geot.2000.50.1.65.
Wang, Z., and Y. Dafalias, and C. Shen. 1990. “Bounding surface hypoplasticity model for sand.” J. Eng. Mech. 116 (5): 983–1001. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:5(983).
Xiao, Y., and H. Liu. 2017. “Elastoplastic constitutive model for rockfill materials considering particle breakage.” Int. J. Geomech. 17 (1): 04016041. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000681.
Xiao, Y., H. L. Liu, J. G. Zhu, and W. C. Shi. 2011. “Dilatancy equation of rockfill material under the true triaxial stress condition.” Sci. China Technol. Sci. 54 (S1): 175–184. https://doi.org/10.1007/s11431-011-4636-1.
Xiao, Y., H. Liu, X. Ding, Y. Chen, J. Jiang, and W. Zhang. 2016. “Influence of particle breakage on critical state line of rockfill material.” Int. J. Geomech. 16 (1): 04015031. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000538.
Zheng, Y. R., and X. N. Gong. 1989. Plasticity principle on geomaterials. Beijing: China Architecture Industry Press.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Jun 5, 2018
Accepted: Oct 26, 2018
Published online: Feb 25, 2019
Published in print: May 1, 2019
Discussion open until: Jul 25, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.