Finite-Element Modeling of Borehole Breakouts for In Situ Stress Determination
Publication: International Journal of Geomechanics
Volume 18, Issue 12
Abstract
Borehole breakouts appear in drilling and production operations when rock subjected to in situ stress experience shear failure. By finite-element modeling of borehole breakouts, the authors obtained the stress state close to the borehole wall, the shape of borehole breakouts, and the mechanism of borehole breakouts in terms of initiation, propagation, and stability. It is desirable that this information on borehole breakouts be used to determine in situ stress by inverse analysis. Artificial neural network provides such a tool to establish the relationship between in situ stress and information on borehole breakouts. Determination of in situ stress by inverse analysis consisted of two steps. First, finite-element modeling provided sets of data on in situ stress and borehole breakout measures, which were used to train an artificial neural network that could eventually represent the relationship between the in situ stress and borehole breakout measures. Second, for a given measure of borehole breakouts, the trained artificial neural network was used to predict the corresponding in situ stress. Verification of the modeling of borehole breakouts was conducted, and numerical experiments were carried out. The results showed that the inverse analysis based on finite-element modeling of borehole breakouts and artificial neural network can effectively determine the in situ stress.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The support of the US Department of Energy [Grant DE-FE0026825, University Coalition for Fossil Energy Research (UCFER)] is greatly acknowledged.
References
Al-Ajmi, A. M., and R. W. Zimmerman. 2005. “Relation between the Mogi and the Coulomb failure criteria.” Int. J. Rock Mech. Min. Sci. 42 (3): 431–439. https://doi.org/10.1016/j.ijrmms.2004.11.004.
Barton, C. A., and M. D. Zoback. 1988. “In-situ stress orientation and magnitude at the Fenton geothermal site, New Mexico, determined from wellbore breakouts.” Geophys. Res. Lett. 15 (5): 467–470. https://doi.org/10.1029/GL015i005p00467.
Bell, J. S., and D. I. Gough. 1979. “Northeast-southwest compressive stress in Alberta: Evidence from oil wells.” Earth Planet Sci. Lett. 45 (2): 475–482. https://doi.org/10.1016/0012-821X(79)90146-8.
Carr, W. J. 1974. Summary of tectonic and structural evidence for stress orientation at the Nevada test site. Open File Report, 74–176. Denver: US Geological Survey.
Cook, B. K., M. Y. Lee, A. A. DiGiovanni, D. R. Bronowski, E. D. Perkins, and J. R. Williams. 2004. “Discrete element modeling applied to laboratory simulation of near-wellbore mechanics.” Int. J. Geomech. 4 (1): 19–27. https://doi.org/10.1061/(ASCE)1532-3641(2004)4:1(19).
Cox, J. W. 1970. “The high resolution dipmeter reveals dip-related borehole and formation characteristics.” In Proc., Trans. 11th SPWLA logging Symp., D1–D26. Houston: Society of Petrophysicists and Well-Log Analysts.
Fakhimi, A., F. Carvalho, T. Ishida, and J. F. Labuz. 2002. “Simulation of failure around a circular opening in rock.” Int. J. Rock Mech. Min. Sci. 39 (4): 507–515. https://doi.org/10.1016/S1365-1609(02)00041-2.
Haimson, B. C. 2007. “Micromechanisms of borehole instability leading to breakouts in rocks.” Int. J. Rock Mech. Min. 44 (2): 157–173. https://doi.org/10.1016/j.ijrmms.2006.06.002.
Haimson, B. C., and C. Chang. 2000. “A new true triaxial cell for testing mechanical properties of rock, and its use to determine rock strength and deformability of Westerly granite.” Int. J. Rock Mech. Min. Sci. 37 (1–2): 285–296. https://doi.org/10.1016/S1365-1609(99)00106-9.
Haimson, B. C., and C. Chang. 2002. “True triaxial strength of the KTB amphibolite under borehole wall conditions and its use to estimate the maximum horizontal in situ stress.” J. Geophys. Res. 107 (B10): 2257–2270. https://doi.org/10.1029/2001JB000647.
Haimson, B. C., and C. G. Herrick. 1985. “In situ stress evaluation from borehole breakouts experimental studies.” In Proc., 26th US Rock Mechanics Symp, 1207–1218. Rotterdam, Netherlands: Balkema.
Haimson, B. C., and C. G. Herrick. 1986. “Borehole breakouts-a new tool for estimating in situ stress?” In Proc., First Int. Symp. on Rock Stress and Rock Stress Measurement, 271–281. Lulea, Sweden: Centek Publications.
Handin, J., H. C. Heard, and J. N. Magouirk. 1967. “Effect of the intermediate principal stress on the failure of limestone, dolomite, and glass at different temperature and strain rate.” J. Geophys. Res. 72 (2): 611–640. https://doi.org/10.1029/JZ072i002p00611.
Hickman, S. H., J. H. Healy, and M. D. Zoback. 1985. “In situ stress, natural fracture distribution and borehole elongation in Auburn geothermal well, Auburn, New York.” J. Geophys. Res. 90 (B7): 5497–5512. https://doi.org/10.1029/JB090iB07p05497.
Hickman, S. H., and M. D. Zoback. 2004. “Stress orientations and magnitudes in the SAFOD pilot hole.” Geophys. Res. Lett. 31 (15): L15S12. https://doi.org/10.1029/2004GL020043.
Lee, H., T. Moon, and B. C. Haimson. 2016. “Borehole breakouts induced in arkosic sandstones and a discrete element analysis.” Rock Mech. Rock Eng. 49 (4): 1369–1388. https://doi.org/10.1007/s00603-015-0812-0.
Leeman, E. R. 1964a. “The measurement of stress in rock part I: The principle of rock stress measurements.” J. S. Afr. Inst. Min. Metal. 65 (2): 45–81.
Leeman, E. R. 1964b. “The measurement of stress in rock part II: Borehole rock stress measuring instruments.” J. S. Afr. Inst. Min. Metal. 65 (2): 82–114.
Leeman, E. R. 1964c. “Rock stress measurements using the trepanning stress-relieving technique.” Min. Quarry Eng. 3: 250–255.
Mastin, L. 1984. “The development of borehole breakouts in sandstone.” M.S. thesis, Stanford Univ.
McCulloch, W. S., and W. H. Pitts. 1943. “A logical calculus of the ideas immanent in nervous activity.” Bull. Math. Biophys. 5 (4): 115–133. https://doi.org/10.1007/BF02478259.
Mogi, K. 1971. “Fracture and flow of rocks under triaxial compression.” J. Geophys. Res. 76 (5): 1255–1269. https://doi.org/10.1029/JB076i005p01255.
Mostafa, G., G. Iraj, and R. S. Seyed. 2014. “Transient thermo-poroelastic finite element analysis of borehole breakouts.” Int. J. Rock Mech. Min. Sci. 71: 418–428. https://doi.org/10.1016/j.ijrmms.2014.08.008.
Papamichos, E. 2010. “Borehole failure analysis in a sandstone under anisotropic stresses.” Int. J. Numer. Anal. Methods Geomech. 34 (6): 581–603.
Rahmati, H. 2013. “Micromechanical study of borehole breakout mechanism.” Ph.D. thesis, Univ. of Alberta.
Shamir, G., and M. D. Zoback. 1992. “Stress orientation profile to 3.5 km depth near the San Andreas Fault at Cajon Pass, California.” J. Geophy. Res. 97 (B4): 5059–5080. https://doi.org/10.1029/91JB02959.
Song, I., and B. C. Haimson. 1997. “Polyaxial strength criteria and their use in estimating in situ stress magnitudes from borehole breakout dimensions.” Int. J. Rock Mech. Min. Sci. 34 (3–4): 116.e1–116.e16.
Vernik, L., and M. D. Zoback. 1992. “Estimation of maximum horizontal principal stress magnitude from stress-induced well bore breakouts in the Cajon Pass scientific research borehole.” J. Geophys. Res. 97 (B4): 5109–5119. https://doi.org/10.1029/91JB01673.
Yilmaz, I., and A. G. Yuksek. 2008. “An example of artificial neural network (ANN) application for indirect estimation of rock parameters.” Rock Mech. Rock Eng. 41 (5): 781–795. https://doi.org/10.1007/s00603-007-0138-7.
Yuan, S. C., and J. P. Harrison. 2006. “Modeling breakout and near-well fluid flow of a borehole in an anisotropic stress field.” In Proc., 41st U.S. Symp. on Rock Mechanics. Alexandria, VA: American Rock Mechanics Association.
Zhang, S., and S. Yin. 2014a. “Determination of horizontal in-situ stresses and natural fracture properties from wellbore deformation.” Int. J. Oil, Gas Coal Technol. 7 (1): 1–28. https://doi.org/10.1504/IJOGCT.2014.057798.
Zhang, S., and S. Yin. 2014b. “Determination of in situ stresses and elastic parameters from hydraulic fracturing tests by geomechanics modeling and soft computing.” J. Pet. Sci. Eng. 124: 484–492. https://doi.org/10.1016/j.petrol.2014.09.002.
Zhang, S., and S. Yin. 2015. “Determination of earth stresses using inverse analysis based on coupled numerical modelling and soft computing.” Int. J. Comput. Appl. Technol. 52 (1): 18–28. https://doi.org/10.1504/IJCAT.2015.071416.
Zheng, Z., J. Kemeny, and N. G. W. Cook. 1989. “Analysis of borehole breakouts.” J. Geophys. Res. 94 (B6): 7171–7182. https://doi.org/10.1029/JB094iB06p07171.
Zoback, M. D., D. Moos, and L. Mastin. 1985. “Well bore breakout and in situ stress.” J. Geophys. Res. 90 (B7): 5523–5538. https://doi.org/10.1029/JB090iB07p05523.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Jul 26, 2017
Accepted: Jun 12, 2018
Published online: Oct 4, 2018
Published in print: Dec 1, 2018
Discussion open until: Mar 4, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.