Constitutive Model for Gas Hydrate–Bearing Soils Considering Hydrate Occurrence Habits
Publication: International Journal of Geomechanics
Volume 17, Issue 8
Abstract
To exploit the resource of methane hydrate, it is crucial to understand the mechanical behavior of hydrate-bearing sediments. In this paper an elastoplastic constitutive model is developed for describing the mechanical behavior of gas hydrate–bearing soils (GHBS). To address the effect of the hydrate occurrence habits, the concept of the effective degree of saturation of the gas hydrate is introduced, and the effective stress stresses are redefined for describing the mechanical response of the GHBS. Within this context, a yield or loading function is developed while considering the bonding effect of gas hydrate; thus, the yield function can expand or shrink as gas hydrate forms or dissociates. To describe more realistically the mechanical behavior of the GHBS, a nonassociative flow rule is proposed by assuming the dilatancy to be a function of bonding stresses, suction stress, and stress ratio. The proposed model is applied to analyze the mechanical responses of the GHBS with different hydrate occurrence habits under different environmental loadings. It is demonstrated that the proposed model can well capture the main features of the mechanical behavior of GHBS, including the hydrate-induced enhancements of stiffness, strength and dilatancy, the unsaturation-related characteristics, and the hydrate occurrence habits dependency, showing that the proposed model is capable of describing the mechanical behavior of GHBS due to hydrate dissociation or under other environmental loadings.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the National Science Foundation of China through Grants 41102199, 11562007, and 51309055, and the Natural Science Foundation of Guangxi through Grant 2012GXNSFGA060001.
References
Berge, L. I., Jacobsen, K. A., and Solstad, A. (1999). “Measured acoustic wave velocities of R11 (CCL3F) hydrate samples with and without sand as a function of hydrate concentration.” J. Geophys. Res., 104(B7), 15415–15424.
Bishop, A. W. (1959). “The principle of effective stress.” Teknisk Ukeblad, 106, 859–863.
Brook, R. H., and Corey, A. T. (1964). “Hydraulic properties of porous media.” Hydrology Paper No. 3, Colorado State Univ., Fort Collins, CO.
Clayton, C. R. I., Priest, J. A., and Rees, E. V. L. (2010). “The effects of hydrate cement on the stiffness of some sands.” Géotechnique, 60(6), 435–445.
Clennell, M. B., Hovland, M., Booth, J. S., Henry, P., and Winter, W. J. (1999). “Formation of natural gas hydrates in marine sediments: 1. Conceptual model of gas hydrate growth conditioned by host sediment properties.” J. Geophys. Res., 104(B10), 22985–23003.
Collett, T. S. (2002). “Energy resource potential of natural gas hydrates.” AAPG Bull., 86(11), 1971–1992.
Dvorkin, J., Prasad, M., Sakai, A., and Lavoie, D. (1999). “Elasticity of marine sediments: Rock physics modeling.” Geophys. Res. Lett., 26(12), 1781–1784.
Fredlund, D. G., and Rahardjo, H. (1993). Soil mechanics for unsaturated soils, John Wiley & Sons, New York.
Fredlund, D. G., and Xing, A. (1994). “Equations for the soil-water characteristic curve.” Can. Geotech. J., 31(4), 521–532.
Gens, A., and Nova, R. (1993). “Conceptual bases for a constitutive model for bonded soils and weak rocks.” Geotechnical engineering of hard soil-soft rocks, A. Anagnostopoulos, F. Schlosser, N. Kalteziotis, and R. Frank, eds., Balkema, Rotterdam, Netherlands.
Grauls, D. (2001). “Gas hydrate: Importance and applications in petroleum exploration.” Mar. Pet. Geol., 18(4), 519–523.
Guerin, G., Goldberg, D., and Melters, A. (1999). “Characterization of in situ elastic properties of gas hydrate-bearing sediments on the Blake Ridge.” J. Geophys. Res., 104(B8), 781–795.
Helgerud, M. B., Dvorkin, J., Nur, A., Sakai, A., and Collett, T. (1999). “Elastic-wave velocity in marine sediments with gas hydrate: Effective medium modeling.” Geophys. Res. Lett., 26(13), 2021–2024.
Henry, P., Thomas, M., and Clennell, M. B. (1999). “Formation of natural gas hydrates in marine sediments: 2. Thermodynamic calculations of stability conditions in porous sediments.” J. Geophys. Res., 104(B10), 23005–23022.
Holder, G. D., Kamath, V. A., and Godbole, S. P. (1984). “The potential of natural gas hydrates as an energy resource.” Annu. Rev. Energy, 9, 427–445.
Hyodo, M., Nakata, Y., Yoshimoto, N., and Ebinuma, T. (2005). “Basic research on the mechanical behavior of methane hydrate-sediments mixture.” Soils Found., 45(1), 75–85.
Hyodo, M., Nakata, Y., Yoshimoto, N., and Orense, R. (2007). “Shear behavior of methane hydrate-bearing sand.” Proc., 17th Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Cupertino, CA.
Kasama, K., Ochiai, H., and Yasufuku, N. (2000). “On the stress-strain behaviour of lightly cemented clay based on an extended critical state concept.” Soils Found., 40(5), 37–47.
Kimoto, S., Oka, F., and Tomohiko, F. (2010). “A chemo–thermo–mechanically coupled analysis of ground deformation induced by gas hydrate dissociation.” Int. J. Mech. Sci., 52(2), 365–376.
Kimoto, S., Oka, F., Tomohiko, F., and Masaya, F. (2007). “A chemo-thermo-mechanically coupled numerical simulation of the subsurface ground deformations due to methane hydrate dissociation.” Comput. Geotech., 34(4), 216–228.
Klar, A., Soga, K., and Ng, M. Y. A. (2010). “Coupled deformation-flow analysis for methane hydrate extraction.” Géotechnique, 60(10), 765–776.
Kvenvolden, K. A., and Lorenson, T. D. (2001). “The global occurrence of natural gas hydrates, natural gas hydrate: occurrence, distribution, and detection.” Geophysical monograph 124, American Geophysical Union, Washington, DC, 3–18.
Lee, K., Chan, D., and Lam, K. (2004). “Constitutive model for cement treated clay in a critical state frame work.” Soils Found., 44(3), 69–77.
Lee, M. W., and Collett, T. S. (2009). “Gas hydrate saturations estimated from fractured reservoir at site NGHP-01-10, Krishna-Godavari Basin, India.” J. Geophys. Res., 114(B7), B07102.
Lee, M. W., and Waite, W. F. (2008). “Estimating pore-space gas hydrate saturations from well log acoustic data.” Geochem. Geophys. Geosyst., 9(7), Q07008.
Li, X. S., and Dafalias, Y. F. (2000). “Dilatancy for cohesionless soils.” Géotechnique, 50(4), 449–460.
Liu, M. D., and Carter, J. P. (2002). “A structured Cam Clay model.” Can. Geotech. J., 39(6), 1313–1332.
Lu, N., and Likos, W. J. (2004). Unsaturated soil mechanics, John Wiley & Sons, New York.
Lu, N., and Likos, W. J. (2006). “Suction stress characteristic curve for unsaturated soil.” J. Geotech. Geoenviron. Eng., 131–142.
Masui, A., Haneda, H., Ogata,Y., and Aoki, K. (2005). “Effects of methane hydrate formation on shear strength of synthetic methane hydrate sediments.” Proc., 15th Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Cupertino, CA.
Masui, A., Haneda, H., Ogata, Y., and Aoki, K. (2007). “Mechanical properties of sandy sediment containing marine gas hydrates in deep sea offshore Japan.” Proc., 17th Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Cupertino, CA.
Masui, A., Miyazaki, K., Haneda, H., Ogata, Y., and Aoki, K. (2008). “Mechanical characteristics of Natural and artificial gas Hydrate bearing sediments.” Proc., 6th Int. Conf. on Gas Hydrate (ICGH 2008), China Geological Survey, Beijing, China.
Mel’nikov, N. N., and Kalashnik, A. I. (2011). “Geodynamic aspects of the development of offshore oil and gas deposits: Case study of Barents region.” Water Resour., 38(7), 896–905.
Miao, L., Cui, Y., and Cui, Y. (2015). “Hydromechanical behaviors of unsaturated soils.” J. Mater. Civ. Eng., 04014209.
Mienert, J., Vanneste, M., Bünz, S., Andreassen, K., Haflidason, H., and Sejrup, H. P. (2005). “Ocean warming and gas hydrate stability on the mid-Norwegian margin at the Storegga Slide.” Mar. Pet. Geol., 22(1–2), 233–244.
Miyazaki, K., Masui, A., Haneda, H., Ogata, Y., Aoki, K., and Yamaguchi, T. (2008). “Variable- Compliance-Type Constitutive model for methane hydrate bearing sediment.” Proc., 6th Int. Conf. on Gas Hydrate (ICGH 2008), China Geological Survey, Beijing, China.
Murray, D. R., Fukuhara, M. R., Osawa, O. R., and Namikawa, T. R. (2006). “Saturation, acoustic properties, growth habit, and state of stress of a gas hydrate reservoir from well logs.” Petrophysics, 47(2), 129–137.
Nixon, M. F., and Grozic, J. L. H. (2007). “Submarine slope failure due to gas hydrate dissociation: A preliminary quantification.” Can. Geotech. J., 44(3), 314–325.
Nova, R., Castellanza, R., and Tamagnini, C. (2003). “A constitutive model for bonded geomaterials subject to mechanical and/or chemical degradation.” Int. J. Numer. Anal. Methods Geomech., 27(9), 705–732.
Pinkert, S., and Grozic, J. L. H. (2015). “Failure mechanisms in cemented hydrate-bearing sands.” J. Chem. Eng. Data, 60(2), 376–382.
Priest, J. A., Rees, E. V. L., and Clayton, C. R. I. (2009). “Influence of gas hydrate morphology on the seismic velocities of sands.” J. Geophys. Res., 114(B11), B11205.
Ruppel, C. (2007). “Tapping methane hydrate for unconventional natural gas.” Elements, 3(3), 193–199.
Sloan, E. D. (2004). “Introductory overview: Hydrate knowledge development.” Am. Mineral., 89(8–9), 1155–1161.
Soga, K., Lee, S. L., Ng, M. Y. A., and Klar, A. (2006). “Characterization and engineering properties of methane hydrate soils.” Proc., 2nd Int. Workshop on Characterization and Engineering Properties of National Soils, T. S. Tan, K. K. Phoon, D. W. Hight, and S. Leroueil, eds., Vol. 4, Swets & Zeitlinger, Lisse, Netherlands, 2591–2642.
Suebsuk, J., Horpibulsuk, S., and Liu, M. D. (2010). “Modified structured Cam Clay: A generalised critical state model for destructured, naturally structured and artificially structured clays.” Comput. Geotech., 37(7), 956–968.
Sultan, N., Cochonat, P., Foucher, J. P., and Mienert, J. (2004). “Effect of gas hydrates melting on seafloor slope instability.” Mar. Geol., 213(1–4), 379–401.
Sultan, N., and Garziglia, S. (2011). “Geomechanical constitutive modelling of gas-hydrate-bearing sediments.” Proc., 7th Int. Conf. on Gas hydrates (ICGH 2011), Heriot Watt Univ., Edinburgh, Scotland, U.K.
Tuller, M. D., Or, D., and Dudley, L. M. (1999). “Adsorption and capillary condensation in porous media: Liquid retention and interfacial configurations in angular pores.” Water Resour. Res., 35(7), 1949–1964.
Uchida, S., Soga, K., and Yamamoto, K. (2012). “Critical state soil constitutive model for methane hydrate soil.” J. Geophys. Res., 117(B3), B03209.
Uchida, T., Ebinuma, T., Takeya, S., Nagao, J., and Narita, H. (2002). “Effects of pore sizes on dissociation temperatures and pressures of methane, carbon dioxide, and propane hydrates in porous media.” J. Phys. Chem. B, 106(4), 820–826.
Van Genuchten, M. T. (1980). “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Waite, W. F., et al. (2009). “Physical properties of Hydrate-bearing sediments.” Rev. Geophys., 47(4), RG4003.
Yan, R., Wei, C., Wei, H., Tian, H., and Wu, E. (2012). “Effect of hydrate formation on the mechanical strength of hydrate-bearing sand.” Chin. J. Geotech. Eng., 34(7), 1234–1240.
Yun, T. S., Francisca, F. M., Santamarina, J. C., and Ruppel, C. (2005). “Compressional and shear wave velocities in uncemented sediment containing gas hydrate.” Geophys. Res. Lett., 32(10), L10609.
Yun, T. S., Santamarina, J. C., and Ruppel, C. (2007). “Mechanical properties of sand, silt, and clay containing tetrahydrofuran hydrate.” J. Geophys. Res., 112(B4), B04106.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 17 • Issue 8 • August 2017
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Jul 22, 2015
Accepted: Jan 17, 2017
Published online: Mar 10, 2017
Published in print: Aug 1, 2017
Discussion open until: Aug 10, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.