Parameters for Load Transfer Analysis of Energy Piles in Uniform Nonplastic Soils
Publication: International Journal of Geomechanics
Volume 17, Issue 7
Abstract
This study focuses on the use of a thermomechanical soil-structure interaction (load transfer) analysis to assess the axial strains, stresses, and displacements during thermomechanical loading of energy piles in various soil deposits with different end restraint boundary conditions. After providing details of the model and its novel features, this paper presents a parametric evaluation performed to understand the roles of the soil shear strength parameters, toe stiffness, head stiffness, side shear stress-displacement curve, and radial expansion, as well as the magnitude of temperature change. This evaluation showed that the end restraint boundary conditions play the most important role in controlling the magnitude and location of the maximum thermal axial stress. The soil type also causes changes in the nonlinearity of the axial stress distribution throughout the energy pile. The radial expansion did not affect the thermomechanical soil-structure interaction for the conditions investigated in this study. The thermomechanical load transfer analysis was then calibrated to identify the parameters that match the observed soil-structure interaction responses from four case studies of energy piles in nonplastic soil or rock layers during monotonic heating, including one field study and three centrifuge studies. The ranges of calibrated parameters provide insight into the behavior of energy piles in nonplastic soils and can be used for preliminary design guidance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support from NSF Grant CMMI-0928159 is gratefully acknowledged. The contents of this paper reflect the views of the authors and do not necessarily reflect the views of the sponsor.
References
Akrouch, G., Sánchez, M., and Briaud, J. L. (2014). “Thermo-mechanical behavior of energy piles in high plasticity clays.” Acta Geotech., 9(3), 399–412.
Amatya, B. L., Soga, K., Bourne-Webb, P. J., Amis, T., and Laloui, L. (2012). “Thermo-mechanical behaviour of energy piles.” Géotechnique, 62(6), 503–519.
Bouazza, A., et al. (2011). “Harnessing on site renewable energy through pile foundations.” Aust. Geomech. J., 46(4), 79–90.
Bourne-Webb, P., Amatya, B., Soga, K., Amis, T., Davidson, C., and Payne, P. (2009). “Energy pile test at Lambeth College, London: Geotechnical and thermodynamic aspects of pile response to heat cycles.” Géotechnique, 59(3), 237–248.
Brandl, H. (2006). “Energy foundations and other energy ground structures.” Géotechnique, 56(2), 81–122.
Burger, A., Recordon, E., Bovet, D., Cotton, L., and Saugy, B. (1985). Thermique des nappes souterraines, Presses Polytechniques Romandes, Lausanne, Switzerland.
Burlon, S., Habert, J., Szymkievicz, F., Suryatriyastuti, M., and Mroueh, H. (2013). “Towards a design approach of bearing capacity of thermoactive piles.” European Geothermal Congress 2013, European Geothermal Energy Council, Brussels, Belgium, 1–6.
Coyle, H. M., and Reese, L. C. (1966). “Load transfer for axially loaded piles in clay.” J. Soil Mech. Found. Div., 92(2), 1–26.
Goode, J., III, and McCartney, J. (2015). “Centrifuge modeling of end-restraint effects in energy foundations.” J. Geotech. Geoenviron. Eng., 04015034.
Goode, J. C., III and McCartney, J. S. (2014). “Evaluation of head restraint effects on energy foundations.” GeoCongress 2014, Geotechnical special publication 234, M. Abu-Farsakh and L. Hoyos, eds., ASCE, Reston, VA, 2685–2694.
Goode, J. C., III, Zhang, M., and McCartney, J. S. (2014). “Centrifuge modeling of energy foundations in sand.” Physical Modeling in Geotechnics: Proc., 8th Int. Conf. on Physical Modelling in Geotechnics, C. Gaudin and D. White, eds., Taylor & Francis, London, 729–736.
Knellwolf, C., Peron, H., and Laloui, L. (2011). “Geotechnical analysis of heat exchanger piles.” J. Geotech. Geoenviron. Eng., 890–902.
Laloui, L. (2011). “In-situ testing of heat exchanger pile.” GeoFrontiers 2011, Geotechnical special publication 211, J. Han and D. E. Alzamora, eds., ASCE, Reston, VA, 410–419.
Laloui, L., Moreni, M., and Vulliet, L. (2003). “Comportement d'un pieu bi-fonction, fondation et échangeur de chaleur.” Can. Geotech. J., 40(2), 388–402.
Laloui, L., and Nuth, M. (2006). “Numerical modeling of some features of heat exchanger pile.” Foundation analysis and design: Innovative methods, Geotechnical special publication 153, R. L. Parsons, L. Zhang, W. D. Guo, K. K. Phoon, and M. Yang, eds., ASCE, Reston, VA. 189–195.
Laloui, L., Nuth, M., and Vulliet, L. (2006). “Experimental and numerical investigations of the behaviour of a heat exchanger pile.” Int. J. Numer. Anal. Methods Geomech., 30(8), 763–781.
Laloui, L., et al. (2014). “Issues involved with thermo-active geotechnical systems: Characterization of thermo-mechanical soil behavior and soil-structure interface behavior.” J. Deep Found. Inst., 8(2), 108–120.
Loveridge, F., and Powrie, W. (2013). “Temperature response function (G-functions) for single pile heat exchangers.” Energy, 57, 554–564.
McCartney, J. S. (2015). “Structural performance of thermo-active foundations.” Advances in thermo-active foundations, M. Krarti, ed., ASME Press, New York, 1–44.
McCartney, J. S., and Murphy, K. D. (2012). “Strain distributions in full scale energy foundations.” J. Deep Found. Inst., 6(2), 28–36.
McCartney, J. S., and Rosenberg, J. E. (2011). “Impact of heat exchange on side shear in thermo-active foundations.” GeoFrontiers 2011, Geotechnical special publication 211, J. Han and D. E. Alzamora, eds., Reston, VA, 488–498.
Mimouni, T., and Laloui, L. (2014). “Towards a secure basis for the design of geothermal piles.” Acta Geotech., 9(3), 355–366.
Murphy, K. D., and McCartney, J. S. (2014). “Thermal borehole shear device.” Geotech. J., 37(6), 1–16.
Murphy, K. D., and McCartney, J. S. (2015). “Seasonal response of energy foundations during building operation.” Geotech. Geol. Eng., 33(2), 343–356.
Murphy, K. D., McCartney, J. S., and Henry, K. S. (2015). “Evaluation of thermo-mechanical and thermal behavior of full-scale energy foundations.” Acta Geotech., 10(2), 179–195.
Ng, C. W. W., Shi, C., Gunawan, A., and Laloui, L. (2014). “Centrifuge modelling of energy piles subjected to heating and cooling cycles in clay.” Géotechnique Lett., 4(4), 310–316.
Ng, C. W. W., Shi, C., Gunawan, A., and Laloui, L. (2015). “Centrifuge modelling of heating effects on energy pile performance in saturated sand.” Can. Geotech. J., 52(8), 1045–1057.
Olgun, C. G., Ozudogru, T. Y., Abdelaziz, S. L., and Senol, A. (2014a). “Long-term performance of heat exchanger pile groups.” Acta Geotech., 10(5), 553–569.
Olgun, C., Ozudogru, T., and Arson, C. (2014b). “Thermo-mechanical radial expansion of heat exchanger piles and possible effects on contact pressures at pile–soil interface.” Géotechnique Lett., 170–178.
Ouyang, Y., Soga, K., and Leung, Y. F. (2011). “Numerical back-analysis of energy pile test at Lambeth College, London.” GeoFrontiers 2011, Geotechnical special publication 211, J. Han and D. E. Alzamora, eds., ASCE, Reston, VA, 440–449.
Pasten, C., and Santamarina, J. (2014). “Thermally induced long-term displacement of thermoactive piles.” J. Geotech. Geoenviron. Eng., 06014003.
Plaseied, N. (2012). “Load transfer analysis of energy foundations.” M.S. thesis, Univ. of Colorado Boulder, Boulder, CO.
Reese, L. C., Isenhower, W. M., and Wang, S. T. (2006). Analysis and design of shallow and deep foundations, Wiley Interscience, New York.
Reese, L. C., and O’Neill, M. W. (1987), “Drilled shafts: Construction procedures and design methods.” Rep. FHWA-HI-88-042, U.S. DOT, Federal Highway Administration, Office of Implementation, McLean, VA.
Rollins, K. M., Clayton, R. J., and Mikesell, R. C. (1997). “Ultimate side friction of drilled shafts in gravel.” Proc., 14th Int. Conf. on Soil Mechanics and Geotechnical Engineering, Hamburg, Germany, International Society for Soil Mechanics ad Geotechnical Engineering, London, Vol. 2, A.A. Balkema, Rotterdam, Netherlands, 1021–1024.
Rotta Loria, A., Donna, A., and Laloui, L. (2015a). “Numerical study on the suitability of centrifuge testing for capturing the thermal-induced mechanical behavior of energy piles.” J. Geotech. Geoenviron. Eng., 04015042.
Rotta Loria, A. F., Gunawan, A., Shi, C., Laloui, L., and Ng, C. W. W. (2015b). “Numerical modelling of energy piles in saturated sand subjected to thermo-mechanical loads.” Geomech. Energy Environ., 1, 1–15.
Stewart, M. A., and McCartney, J. S. (2013). “Centrifuge modeling of soil-structure interaction in energy foundations.” J. Geotech. Geoenviron. Eng., 04013044.
Suryatriyastuti, M. E., Mroueh, H., Burlon, S. (2013). “Numerical analysis of the bearing capacity in thermo-active piles under cyclic axial loading.” Energy geostructures: Innovation in underground engineering, L. Laloui and A. Di Donna, eds., John Wiley, Hoboken, NJ, 139–154.
Sutman, M., Brettmann, T., and Olgun, C. G. (2014). “Thermo-mechanical behavior of energy piles: Full-scale field test verification.” DFI 39th Annual Conf. on Deep Foundations, Deep Foundations Institute, Hawthorne, NJ, 1–11.
Tomlinson, M. J. (1957). “Adhesion of piles in clay soils.” Proc., 4th Int. Conf. on Soil Mechanics and Foundations Engineering, Vol. 2, Butterworths, London, 66–71.
Vesić, A. (1975). “Bearing capacity of shallow foundations.” Foundation engineering handbook, 1st Ed., H. F. Winterkorn and H. Y. Fang, eds., Van Nostrand Reinhold, New York.
Wang, B., Bouazza, A., Singh, R., Haberfield, C., Barry-Macaulay, D., and Baycan, S. (2014). “Posttemperature effects on shaft capacity of a full-scale geothermal energy pile.” J. Geotech. Geoenviron. Eng., 04014125.
Wang, W., Regueiro, R., and McCartney, J. S. (2015). “Coupled axisymmetric thermo-poro-mechanical finite element analysis of energy foundation centrifuge experiments in partially saturated silt.” Geotech. Geol. Eng., 33(2), 373–388.
Wang, W., Regueiro, R., Stewart, M. A., and McCartney, J. S. (2012). “Coupled thermo-poro-mechanical finite element analysis of a heated single pile centrifuge experiment in saturated silt.” GeoCongress 2012, Geotechnical special publication 225, R. D. Hryciw, A. Athanasopoulos-Zekkos, and N. Yesiller, eds., ASCE, Reston, VA, 4406–4415.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 17 • Issue 7 • July 2017
Copyright
© 2016 American Society of Civil Engineers.
History
Received: May 6, 2016
Accepted: Oct 27, 2016
Published online: Dec 7, 2016
Discussion open until: May 7, 2017
Published in print: Jul 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.