3D Stability Charts for Convex and Concave Slopes in Plan View with Homogeneous Soil Based on the Strength-Reduction Method
Publication: International Journal of Geomechanics
Volume 17, Issue 5
Abstract
The analysis of slope stability problems in engineering practice requires considerable attention for the three-dimensional (3D) effect of plan curvature of the slope. This paper quantifies this effect by a dimensionless parameter of the relative curvature radius of the slope (R/H) and proposes a set of 3D stability charts that can be used to estimate the factor of safety (FOS) of convex and concave slopes in plan view with homogeneous soil, extending those currently regularly used for 3D straight slope stability evaluations. To simplify the computational process, an alternative way to perform the FEM with the strength-reduction technique is used herein in the slope stability analysis. The strength-reduction analysis results in this paper together with results of other researchers were found to bracket the FOS to within ±5% or better and therefore can be used to benchmark the solutions of other methods. Changing the relative curvature radius of the slope (R/H) shows that concave slopes are more stable than straight slopes, but that convex slopes are less stable; moreover, the 3D effects are more significant in slopes with friction/cohesive soils with smaller values of R/H. Numerical 3D results are presented in the form of dimensionless graphs, which represent a convenient tool for practicing engineers to estimate the initial stability of excavated or artificial slopes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study received financial support from the program 2013KCT-15 for the Shaanxi Provincial Key Innovative Research Team and the National Natural Science Foundation of China (Grants 51409206 and 51409208). This support is gratefully acknowledged. The authors also express their gratitude to anonymous reviewers for their constructive comments on the manuscript.
References
Abaqus 6.10 [Computer software]. SIMULIA, Providence, RI.
Askari, F., Totonchi, A., and Farzaneh, O. (2012). “3D stability analysis of convex slopes in plan view using lower bound linear finite element.” Int. J. Civ. Eng., 10(2), 112–123.
Baker, R. (2003). “A second look at Taylor’s stability charts.” J. Geotech. Geoenviron. Eng., 1102–1108.
Baker, R., and Leshchinsky, D. (1987). “Stability analysis of conical heaps.” Soils Found., 27(4), 99–110.
Bell, J. M. (1966). “Dimensionless parameters for homogeneous earth slopes.” J. Soil Mech. Found. Div., 92(5), 51–65.
Chen, J., Yin, J., and Lee, C. F. (2003). “Upper bound limit analysis of slope stability using rigid finite elements and nonlinear programming.” Can. Geotech. J., 40(4), 742–752.
Chen, Z., Wang, X., Haberfield, C., Yin, J., and Wang, Y. (2001). “A three-dimensional slope stability analysis method using the upper bound theorem: Part I: Theory and methods.” Int. J. Rock Mech. Min. Sci., 38(3), 369–378.
Cheng, Y. M., and Lau, C. K. (2008). Slope stability analysis and stabilization: New methods and insight, Taylor and Francis, London.
Cheng, Y. M., Liu, H. T., Wei, W. B., and Au, S. K. (2005). “Location of critical three-dimensional non-spherical failure surface by NURBS functions and ellipsoid with applications to highway slopes.” Comput. Geotech., 32(6), 387–399.
Clara-W [Computer software]. Hungr Geotechnical Research, Inc., West Vancouver, BC, Canada.
Dawson, E. M., Roth, W. H., and Drescher, A. (1999). “Slope stability analysis by strength reduction.” Géotechnique, 49(6), 835–840.
Eid, H. T. (2014). “Stability charts for uniform slopes in soils with nonlinear failure envelopes.” Eng. Geol., 168, 38–45.
Eid, H. T., Elleboudy, A. M., Elmarsafawi, H. G., and Salama, A. G. (2006). “Stability analysis and charts for slopes susceptible to translational failure.” Can. Geotech. J., 43(12), 1374–1388.
Farzaneh, O., Askari, F., and Ganjian, N. (2008). “Three-dimensional stability analysis of convex slopes in plan view.” J. Geotech. Geoenviron. Eng., 1192–1200.
FLAC3D [Computer software]. Itasca Consulting Group, Minneapolis.
Fredlund, D. G., and Krahn, J. (1977). “Comparison of slope stability methods of analysis.” Can. Geotech. J., 14(3), 429–439.
Gao, Y., Zhang, F., Lei, G. H., Li, D., Wu, Y., and Zhang, N. (2013). “Stability charts for 3D failures of homogeneous slopes.” J. Geotech. Geoenviron. Eng., 1528–1538.
Gens, A., Hutchinson, J. N., and Cavounidis, S. (1988). “Three-dimensional analysis of slides in cohesive soils.” Géotechnique, 38(1), 1–23.
Giger, M. W., and Krizek, R. J. (1975). “Stability analysis of vertical cut with variable corner angle.” Soils Found., 15(2), 63–71.
Giger, M. W., and Krizek, R. J. (1976). “Stability of vertical corner cut with concentrated surcharge load.” J. Geotech. Engrg. Div., 102(1), 31–40.
Griffiths, D. V., and Marquez, R. M. (2007). “Three-dimensional slope stability analysis by elasto-plastic finite elements.” Géotechnique, 57(6), 537–546.
Hoek, E., and Bray, J. W. (1981). Rock slope engineering, 3rd Ed., Institute of Mining and Metallurgy, London.
Hungr, O. (1987). “An extension of Bishop’s simplified method of slope stability analysis to three dimensions.” Géotechnique, 37(1), 113–117.
Janbu, N. (1968). “Slope stability computations.” Soil Mech. Found. Engrg. Rep., Technical Univ. of Norway, Trondheim, Norway.
Lane, P. A., and Griffiths, D. V. (1999). “Slope stability analysis by finite elements.” Géotechnique, 49(3), 387–403.
Leshchinsky, D., and Baker, R. (1986). “Three-dimensional slope stability: End effects.” Soils Found., 26(4), 98–110.
Leshchinsky, D., Baker, R., and Silver, M. L. (1985). “Three-dimensional analysis of slope stability.” Int. J. Numer. Anal. Methods. Geomech., 9(3), 199–223.
Li, A. J., Cassidy, M. J., Wang, Y., Merifield, R. S., and Lyamin, A. V. (2012). “Parametric Monte Carlo studies of rock slopes based on the Hoek-Brown failure criterion.” Comput. Geotech., 45, 11–18.
Li, A. J., Merifield, R. S., and Lyamin, A. V. (2009). “Limit analysis solutions for three dimensional undrained slopes.” Comput. Geotech., 36(8), 1330–1351.
Li, A. J., Merifield, R. S., and Lyamin, A. V. (2010). “Three-dimensional stability charts for slopes based on limit analysis methods.” Can. Geotech. J., 47(12), 1316–1334.
Lim, K., Li, A. J., and Lyamin, A. V. (2015). “Three-dimensional slope stability assessment of two-layered undrained clay.” Comput. Geotech., 70, 1–17.
Manzari, M. T., and Nour, M. A. (2000). “Significance of soil dilatancy in slope stability analysis.” J. Geotech. Geoenviron. Eng., 75–80.
Matsui, T., and San, K. C. (1992). “Finite element slope stability analysis by shear strength reduction technique.” Soils Found., 32(1), 59–70.
Michalowski, R. L. (2002). “Stability charts for uniform slopes.” J. Geotech. Geoenviron. Eng., 351–355.
Michalowski, R. L. (2010). “Limit analysis and stability charts for 3D slope failures.” J. Geotech. Geoenviron. Eng., 583–593.
Michalowski, R. L., and Martel, T. (2011). “Stability charts for 3D failures of steep slopes subjected to seismic excitation.” J. Geotech. Geoenviron. Eng., 183–189.
Nian, T. K., Huang, R. Q., Wan, S. S., and Chen, G. Q. (2012). “Three-dimensional strength-reduction finite element analysis of slopes: Geometric effects.” Can. Geotech. J., 49(5), 574–588.
Ohlmacher, G. C. (2007). “Plan curvature and landslide probability in regions dominated by earth flows and earth slides.” Eng. Geol., 91(2–4), 117–134.
Steward, T., Sivakugan, N., Shukla, S. K., and Das, B. M. (2011). “Taylor’s slope stability charts revisited.” Int. J. Geomech., 348–352.
Taylor, D. W. (1937). “Stability of earth slopes.” J. Boston Soc. Civ. Eng., 24(3), 197–246.
Ugai, K., and Leshchinsky, D. (1995). “Three-dimensional limit equilibrium and finite element analyses: A comparison of results.” Soils Found., 35(4), 1–7.
Yu, Y., Xie, L., and Zhang, B. (2005). “Stability of earth rockfill dams: Influence of geometry on the three-dimensional effect.” Comput. Geotech., 32(5), 326–339.
Zhang, X. (1988). “Three-dimensional stability analysis of concave slopes in plan view.” J. Geotech. Engrg., 114(6), 658–671.
Zhang, Y., Chen, G., Zheng, L., Li, Y., and Zhuang, X. (2013). “Effects of geometries on three-dimensional slope stability.” Can. Geotech. J., 50(3), 233–249.
Zheng, H., Liu, D. F., and Li, C. G. (2005). “Slope stability analysis based on elasto-plastic finite element method.” Int. J. Numer. Methods Eng., 64(14), 1871–1888.
Zheng, H., Liu, D. F., and Li, C. G. (2008). “On the assessment of failure in slope stability analysis by the finite element method.” Rock Mech. Rock Eng., 41(4), 629–639.
Zienkiewicz, O. C., Humpheson, C., and Lewis, R. W. (1975). “Associated and non-associated visco-plasticity and plasticity in soil mechanics.” Géotechnique, 25(4), 671–689.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 20, 2015
Accepted: Aug 22, 2016
Published online: Oct 5, 2016
Discussion open until: Mar 5, 2017
Published in print: May 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.